Rack Rackmount Case
November 30th, 2009
Rack Rackmount Case
|
|
Mackie Profx16 Rackmount Kit $59.99 This Mackie Rackmount Bracket Set lets you easily secure your ProFX 16 mixer into the rack gear case of your choice. Also makes setup and breakdown of your rig a lot easier. |
|
|
Skb 10X6 Rack Console Case $209.99 The 1SKB-R106 10x6 Roto Rack Console is a 10-unit slanted top and 6-unit front, rack case that features steel threaded rails, hard lid and doors, side access ports (for cable routing) and has enough space to mount the new AV-8 8-space Audio Video Shelf (sold separately) with the lid closed! The 1-piece base is roto-molded of Linear Medium Density Polyethylene (LMDPE) while the hard front, rear doors and lid are Injection molded of Rubber Modified Styrene (RMS). The back lid provides maximum access to the rack gear. Two TSA locking SKB patented trigger latches secure the lid while the flat hard top allows for stacking in transport and storage.10U Slanted rackmount on top6U rackmount in frontHard lid and doorsSide access ports for cable routingInjection molded front and rear doors and lidTwo TSA locking patented trigger latchesStackable for storage and transport |
|
|
Boss Rad-50 Rackmount Adapter $39.9 Mount 2 half-rack size units side by side in a standard 19" rack with the Boss RAD-50 Rackmount Adapter. |
|
|
Used Skb 10X6 Rack Console Case $191.09 The 1SKB-R106 10x6 Roto Rack Console is a 10-unit slanted top and 6-unit front, rack case that features steel threaded rails, hard lid and doors, side access ports (for cable routing) and has enough space to mount the new AV-8 8-space Audio Video Shelf (sold separately) with the lid closed! The 1-piece base is roto-molded of Linear Medium Density Polyethylene (LMDPE) while the hard front, rear doors and lid are Injection molded of Rubber Modified Styrene (RMS). The back lid provides maximum access to the rack gear. Two TSA locking SKB patented trigger latches secure the lid while the flat hard top allows for stacking in transport and storage.10U Slanted rackmount on top6U rackmount in frontHard lid and doorsSide access ports for cable routingInjection molded front and rear doors and lidTwo TSA locking patented trigger latchesStackable for storage and transport |
|
|
Skb Roto Rack Console - Audio And Dj Rack Case 10X4 $179.99 The SKB Roto Rack Console Case is a 10U, slanted top and a 4U, front rack case that features steel threaded rails, a hard lid and doors, side access ports for cable routing, and has enough space to mount SKB's AV-8, 8-Space Audio/Video Shelf (not included) with the lid closed. The Audio & DJ console case's one-piece base is roto-molded of Linear Medium Density Polyethylene (LMDPE) while the hard front, rear doors, and lid are injection-molded of Rubber Modified Styrene (RMS). The back lid provides maximum access to your rackmounted audio equipment and DJ gear. Two TSA locking, SKB-patented trigger latches secure the lid while the flat hardtop allows for stacking in transport and in storage.10U slanted rackmount on top4U rackmount in frontHard lid and doorsSide-access ports for cable routingInjection-molded front and rear doors and lid2 TSA locking, patented-trigger latchesStackable for storage and transportManufacturer's model number: 1SKB-R104 |
|
|
Used Skb Roto Rack Console - Audio And Dj Rack Case 10X4 $163.79 The SKB Roto Rack Console Case is a 10U, slanted top and a 4U, front rack case that features steel threaded rails, a hard lid and doors, side access ports for cable routing, and has enough space to mount SKB's AV-8, 8-Space Audio/Video Shelf (not included) with the lid closed. The Audio & DJ console case's one-piece base is roto-molded of Linear Medium Density Polyethylene (LMDPE) while the hard front, rear doors, and lid are injection-molded of Rubber Modified Styrene (RMS). The back lid provides maximum access to your rackmounted audio equipment and DJ gear. Two TSA locking, SKB-patented trigger latches secure the lid while the flat hardtop allows for stacking in transport and in storage.10U slanted rackmount on top4U rackmount in frontHard lid and doorsSide-access ports for cable routingInjection-molded front and rear doors and lid2 TSA locking, patented-trigger latchesStackable for storage and transportManufacturer's model number: 1SKB-R104 |
|
|
Gator G-Tour 12U Ata Rack Road Case $399.99 The Gator G-Tour ATA Rack Road Case features front and rear 3.2mm-thick rack rails and a 17" rackable depth with the lid removed. Accomodates 12 rackspaces. 9mm plywood shell with a polypropylene exterior. The aluminum valance is double-thick and tongue and grooved for rugged touring duty to keep your rackmount music gear safe. Heavy-duty hardware includes recessed latches and handles. The ATA rack case also includes Red Penn Elcom recessed MOL twist latches and spring-loaded rubber-gripped handles.Front and rear rack rails3.2mm-thick rack rails17" rackable depth with lid removed9mm plywood constructionSolid polypropylene exteriorMeets ATA specs for flight casesPenn Elcom recessed MOL twist latches and spring-loaded rubber-gripped handlesHeavy-duty chromeplated hardwareReinforced corners for ultimate protectionSpring-loaded handles |
|
|
Skb Skb-Rlx Roll-X Rack Case With Wheels 4 Space $159.99 The SKB SKB-RLX Roll-X Rack Case with Wheels has a depth of 17" that will accommodate most rackmount equipment. Made of military-spec polyethylene rotationally molded plastic with 2.5" wheels and industrial pull handle, the Roll-X racks interlock and stack with each other. SKB is our premier supplier of instrument and gear cases. SKB builds their products with military-spec, ultrahigh molecular weight polyethylene and premium hardware. All SKB hardshell cases are unconditionally guaranteed forever. That means if you break it, SKB will repair or replace your Roll-X Rack Case at no cost to you.Rotationally molded plastic2.5" wheelsIndustrial pull handle17" deep |
|
|
Skb Skb-Rlx Roll-X Rack Case With Wheels 5 Space $169.99 The SKB SKB-RLX Roll-X Rack Case with Wheels has a depth of 17" that will accommodate most rackmount equipment. Made of military-spec polyethylene rotationally molded plastic with 2.5" wheels and industrial pull handle, the Roll-X racks interlock and stack with each other. SKB is our premier supplier of instrument and gear cases. SKB builds their products with military-spec, ultrahigh molecular weight polyethylene and premium hardware. All SKB hardshell cases are unconditionally guaranteed forever. That means if you break it, SKB will repair or replace your Roll-X Rack Case at no cost to you.Rotationally molded plastic2.5" wheelsIndustrial pull handle17" deep |
|
|
Skb Skb-Rlx Roll-X Rack Case With Wheels 3 Space $149.99 The SKB SKB-RLX Roll-X Rack Case with Wheels has a depth of 17" that will accommodate most rackmount equipment. Made of military-spec polyethylene rotationally molded plastic with 2.5" wheels and industrial pull handle, the Roll-X racks interlock and stack with each other. SKB is our premier supplier of instrument and gear cases. SKB builds their products with military-spec, ultrahigh molecular weight polyethylene and premium hardware. All SKB hardshell cases are unconditionally guaranteed forever. That means if you break it, SKB will repair or replace your Roll-X Rack Case at no cost to you.Rotationally molded plastic2.5" wheelsIndustrial pull handle17" deep |
|
|
Skb Skb-Rlx Roll-X Rack Case With Wheels 6 Space $184.99 The SKB SKB-RLX Roll-X Rack Case with Wheels has a depth of 17" that will accommodate most rackmount equipment. Made of military-spec polyethylene rotationally molded plastic with 2.5" wheels and industrial pull handle, the Roll-X racks interlock and stack with each other. SKB is our premier supplier of instrument and gear cases. SKB builds their products with military-spec, ultrahigh molecular weight polyethylene and premium hardware. All SKB hardshell cases are unconditionally guaranteed forever. That means if you break it, SKB will repair or replace your Roll-X Rack Case at no cost to you.Rotationally molded plastic2.5" wheelsIndustrial pull handle17" deep |
|
|
Raxxess Carpeted Converta Rack 10X10 Space $289.99 A compact rack case solution that will hold your rackmount mixer, signal processor, and power amp in one convenient unit. The Converta Rack sets up and packs up fast, is internally braced, and has a rugged carpeted exterior that will shrug off rough handling. Made in the USA. |
|
|
Used Gator Grc-Studio4go-W Laptop Or Mixer Over 4U Rack Case $245.67 The Gator GRC-Studio4Go-W Laptop or Mixer Rack Case features rugged military-grade polyethylene construction, 4U of rack rail for rackmount recording devices and disk drive, an adjustable laptop compartment with no-slip web strap tie-downs and a convoluted foam interior in the lid. An access hole between top and bottom compartments allows the laptop to be permanently connected to the recording gear. Retractable handle and wheels.Military-grade polyethylene construction ATA style case 4U of field-replaceable threaded rack rail for rack mount recording devices & disk drive Adjustable laptop compartment with no-slip web strap tie-downs Convoluted foam interior in lid Access hole between top & bottom compartments allow the laptop to be permanently connected to the recording gear Retractable handle & wheels Includes mounting hardware |
 |
 SKB Roto Rack 6U Space w SKB VS1 rackmount pull out velco shelf  US $46.00
|
 25U Rack Mount Studio Mixer Cabinet Road Case Stand DJ US $192.95
|
 Gator Studio2Go portable rack case US $89.95
|
 Armadillo Heavy Duty 2 Space Rack Mount with handle Used in Good Condition US $40.00
|
 14 Space Rolling Rack Mount Road Case US $165.00
|
 Raxxess Gar 40 26 Studio Rack Mount Case Tower Music US $345.00
|
 ROAD RUNNER DELUXE ATA 300 8U EFFECTS RACK MOUNT CASE US $100.00
|
 GATOR RACK MOUNT TRAVEL CASE US $60.00
|
 Nelson Road Case 14 Space Rackmount Case w Casters US $31.00
|
 SKB 20 Deep Rolling Roto Shock Rack Case US $94.99
|
 CALZONE AUDIO MIXER RACK CASE US $179.99
|
 19 2 SPACE 2U RACK DRAWER MOUNT CASE COMPUTER NETWORKING LOCKABLE DJ EQUIPMENT US $50.00
|
 Pair 6 Space 6U EIA Rack Rail 19 QUICK FREE SHIPPING US $10.43
|
 2U Rack Mount Steel Shelf Tray Utility Studio Gear DJ PA Road Case Drawer US $22.95
|
 DJ Mixer Amp Rack Mount Case 10 x 6 US $222.00
|
 Shure URT Rack Tray For 2 PGX4 PGX Wireless Rack Mount Tray US $29.95
|
 SKB Type Rack Mount Clips Raxxess Screws Washers 12 US $16.50
|
 ODYSSEY DJ CASE LARGE 19 RACK MOUNT CT 22 Pro Twin Case US $200.00
|
 OSP 4 Space Metal Rack Drawer w Lock B STOCK 4U US $49.99
|
 Pro 12 Space 19 Studio Recording Table Top Rack Stand US $32.50
|
 Roller Audio Cabinet for Pro Electronics Rack Mount US $150.00
|
 2U Rack Mount Studio Gear Sliding Drawer Shelf 16 Deep Griffin US $59.95
|
 OSP 4 Space 4u 14 deep Effects Amp 19wide Rack Mount Road Tour ATA Flight Case US $119.99
|
 ODYSSEY CASES FRER8 NEW FLIGHT READY 8U RACKMOUNT DJ SPECIAL EFFECTS RACK CASE US $139.99
|
 Pair 10 Space 10U EIA Rack Rail 19 QUICK FREE SHIPPING US $15.13
|
 OSP 6 Space ATA Shallow 6U Rack Mount Road Flight Case US $139.99
|
 M2 MASK for DJ play Rack Mount Case Pioneer kit Crossfader Rotary Knob PRO VSW 1 US $90.00
|
 3U 3 SPACE 19 RACK DRAWER MOUNT RACKMOUNT CASE HEAVY DUTY METAL STEEL KEY DJ PA US $63.95
|
 DJ MIXER PA RACK MOUNT MIXER CASE AMP CARPETED ROAD CASE USA CASE 4 SPACE MIXER US $21.59
|
 Pair 28 Space 28U EIA Rack Rail 19 QUICK FREE SHIPPING US $34.96
|
 4 Space 4U 19 Locking Lockable Deep Rack Mount Drawer DJ Rack Case Equipment US $75.95
|
 Pair 8 Space 8U EIA Rack Rail 19 QUICK FREE SHIPPING US $13.42
|
 Computer Recording Rack SKB US $179.00
|
 Pair 14 Space 14U EIA Rack Rail 19 QUICK FREE SHIPPING US $18.96
|
 2x LARGE CD 19 10U RACKMOUNT MIXER GLIDE STYLE ROAD COFFIN FLIGHT READY CASE DJ US $199.99
|
 ECS 7000 13U 19x24 Rackmount Composite Shockmount Case US $300.00
|
 Hardware 3 Space Locking Heavy Duty Rack Drawer Rack Drawer US $49.99
|
 18 SPACE GMI PRO CARPET AMP RACK DJ CASE WITH 4 CASTERS ALL PLYWOOD CONSTRUCTION US $201.57
|
 2 Space Rack Mount Locking Lockable Steel Drawer Shelf Griffin US $59.95
|
 1 Space 1U 19 Locking Lockable Deep Rack Mount Drawer DJ Rack Case Equipment US $47.95
|
 |
Gator Cases Fully Enclosed Rack Drawer (Black, 2 Units, 14-inch deep) List Price: $139.99 Sale Price: $72.24 Used From: $68.80  |
|
Gator Cases GE-DRAWER-2U 2U Fully Enclosed Drawer with Lock Cut-Out and Two 2" Rubber Grommets for Rear Access, 14.2" Deep Black |
 |
OnStage RS7030 Rack Stand List Price: $39.60 Sale Price: $25.99 Used From: $20.26 |
|
This stand is so convenient it can be placed just about anywhere, on stage, in the studio, even atop a cabinet, amp or rack. Guitarists will love having effects at their fingertips instead of hiding inside a large rack case... |
 |
Gator Cases Studio Rack Cabinet (Black, 4 Space) List Price: $134.99 Sale Price: $78.39 |
|
Gator Cases GR-STUDIO-4U 4 Space Studio Rack Cabinet |
 |
Gator Shallow 4U Audio Rack (GR-4S) List Price: $209.99 Sale Price: Too low to display Used From: $128.99 |
|
Molded PE Rack Case; Front, Rear Rails; 4U; 14.25" Deep |
 |
Gator Cases Fully Enclosed Rack Drawer (Black, 3 Units, 14-inch deep) List Price: $149.99 Sale Price: $85.25 Used From: $77.17 |
|
Gator Cases GE-DRAWER-3U 3U Fully Enclosed Drawer with Lock Cut-Out and Two 2" Rubber Grommets for Rear Access, 14.2" Deep Black |
 |
Odyssey ARS1 1 Space Rack Shelf Accessory List Price: $29.99 Sale Price: $13.95 |
|
Odyssey's metal rack shelves are perfect for gear without rack ears. Especially well suited for studio and permanent installation. The ARS1 takes up 1u or 1.75" of rack space and is 10" deep. Use Odyssey's clamping rack shelves (ASC2-4) for mounting gear in a rack that will be transported... |
 |
SKB 1U Soft Rack Case, Steel Rails, Heavy Duty zippers, outer pocket, Shoulder straps List Price: $94.99 Sale Price: $46.38 |
|
Primarily designed for wireless microphone systems, the 1SKB-SC191U, a 1U rack size, is constructed of a wood core covered by 600 Denier Nylon. The case could also be used for pre-amps, effects, etc. This soft case has been developed with the focus on portability and includes an adjustable shoulder strap and loop handle for easy transport... |
 |
American Dj Pc-100A Rack Mount Power Switcher List Price: $39.95 Sale Price: Too low to display |
|
A must for every DJ! Designed to eliminate extension cords and messy wires, the PC100A features 8 lighted switches and a 15A resettable circuit breaker right on the front panel. Ideal for switching lights and sound equipment... |
 |
Odyssey CRS08 8 Space Carpeted Studio Rack List Price: $119.99 Sale Price: $85.00 Used From: $80.99 |
|
Odyssey's CRS08 carpeted studio rack features 3/4" plywood construction and an angled face for easy viewing and access. Open back, no panels front or rear. 8 spaces. Features a 12" top depth, 16" bottom depth, and a fully carpeted exterior... |
 |
Gator Cases 1U Sliding Shelf (Black, 13.8-Inch Deep) List Price: $99.99 Sale Price: $59.95 |
|
Gator Cases GE-SHLF-SLD-1U 1U Sliding Shelf, 13.8" Deep, Black |
Rackmount computer case query?
I need to buy a new case for my computer and if I could make it rack-mountable it would be very handy indeed. Do rackmount cases exist for regular desktop PCs? Most options I find seem very industrial, and i'm not too sure if they'd suit what i'm after. Can anyone help?
Rack mounting requires a 19 inch wide rack, and most home pc's are not designed for rack mounting.
When we use racks with a standard pc case, the pc is just placed in the bottom of the cabinet.
You could buy a small rack mounted server and use it, but it may not suit your requirements.