PonyMouse ATA Road Cases

Amp Rack Shock

Check out this page if you are looking for Amp Rack Shock

Gibraltar Drum Rack Shock Microphone Mount $19.99 Mount microphones right from your rack, comes with shock mount.

Gator G-Shock16l Ata-Style Deluxe Shock Rack $489.99 The durable Gator ATA-style Deluxe Shock Rack keeps your live sound gear safe with a lightweight polyethylene casing protected by shock absorbent rubber bumpers on the corners. It includes 16 storage and has 360 degree ventilation to prevent overheating. A sliding support allows additional support when needed for heavy gear.Lightweight polyethylene constructionIndependent rubber shock absorbers at each corner16 Space shock rack with double shocks per corner360 Degree air ventilation around equipment7mm Threaded field replaceable zinc plated rack railsAdjustable interior sliding support on each side of rack adjusts front to back as well as up & down for rear support of delicate or heavy gearComfortable recessed side handlesHeat treated 10/32 rail bolts & washers includedLocking lids

Gator Ga-200 Caster Kit For Shock Rack $94.99 The Gator GA-100 Caster Kit for the shock rack is constructed of high density 3/4" industrial acrylic coated plywood. Your audio rack is held in place using 2 locking web straps, and the platform is equipped with 4" industrial grade casters to enable easy transportation of your music equipment.3/4" industrial acrylic coated plywood2 locking web straps4" Industrial grade casters

Gator G-Shock Ata-Style Deluxe Rack Case 12 Space $399.99 The Gator G-Shock ATA-Style Deluxe Rack Case is designed to protect sensitive rack gear such as disk drives and LCDs. Rubber shock absorbers on all 8 corners of the rack assure your equipment a soft ride. The adjustable rear rail provides support regardless of gear length.Independent rubber shock absorbersRecessed side handles360 ventilationRugged PE (polyethylene) lightweight cabinet7mm threaded zinc-plated rack railCase-hardened rail bolts and washers includedLockable

Gator G-Shock Ata-Style Deluxe Rack Case 4 Space $319.99 The Gator G-Shock ATA-Style Deluxe Rack Case is designed to protect sensitive rack gear such as disk drives and LCDs. Rubber shock absorbers on all 8 corners of the rack assure your equipment a soft ride. The adjustable rear rail provides support regardless of gear length.Independent rubber shock absorbersRecessed side handles360 ventilationRugged PE (polyethylene) lightweight cabinet7mm threaded zinc-plated rack railCase-hardened rail bolts and washers includedLockable

Gator G-Shock Ata-Style Deluxe Rack Case 8 Space $369.99 The Gator G-Shock ATA-Style Deluxe Rack Case is designed to protect sensitive rack gear such as disk drives and LCDs. Rubber shock absorbers on all 8 corners of the rack assure your equipment a soft ride. The adjustable rear rail provides support regardless of gear length.Independent rubber shock absorbersRecessed side handles360 ventilationRugged PE (polyethylene) lightweight cabinet7mm threaded zinc-plated rack railCase-hardened rail bolts and washers includedLockable

Odyssey Black Label Amp Rack 4 Space Rack $169.99 These new sturdy Black Label ATA Amp Racks incorporate dual rack rails (front and rear), heavy-duty rubber feet (non-wheeled versions), spring-loaded handles, and removable front and rear covers. Designed to protect and transport larger amps and other standard 19" rack mount gear.

Odyssey Black Label Amp Rack 8 Space Rack $219.99 These new sturdy Black Label ATA Amp Racks incorporate dual rack rails (front and rear), heavy-duty rubber feet (non-wheeled versions), spring-loaded handles, and removable front and rear covers. Designed to protect and transport larger amps and other standard 19" rack mount gear.

Odyssey Black Label Amp Rack 6 Space Rack $181.99 These new sturdy Black Label ATA Amp Racks incorporate dual rack rails (front and rear), heavy-duty rubber feet (non-wheeled versions), spring-loaded handles, and removable front and rear covers. Designed to protect and transport larger amps and other standard 19" rack mount gear.

Skb 20 Deep Rolling Roto Shock Rack Case 4U $679.99 The SKB 3SKB-R04U20W Rolling Roto Shock Rack incorporates SKB's recessed patent-pending TSA trigger latches and low-profile injection molded pull handle. The roto-molded design provides extra stiffness in the lids and sides while also allowing the racks to stack securely together. The hardshell rack case also has built-in wheels and is shock- and water-resistant.TSA latches Threaded steel rails Rear rails Built-in wheels Shock and water resistant Low-profile pull handle

Skb 20 Deep Rolling Roto Shock Rack Case 6U $699.99 The SKB 3SKB-R04U20W Rolling Roto Shock Rack incorporates SKB's recessed patent-pending TSA trigger latches and low-profile injection molded pull handle. The roto-molded design provides extra stiffness in the lids and sides while also allowing the racks to stack securely together. The hardshell rack case also has built-in wheels and is shock- and water-resistant.TSA latches Threaded steel rails Rear rails Built-in wheels Shock and water resistant Low-profile pull handle

Skb 20 Deep Rolling Roto Shock Rack Case 8U $749.99 The SKB 3SKB-R04U20W Rolling Roto Shock Rack incorporates SKB's recessed patent-pending TSA trigger latches and low-profile injection molded pull handle. The roto-molded design provides extra stiffness in the lids and sides while also allowing the racks to stack securely together. The hardshell rack case also has built-in wheels and is shock- and water-resistant.TSA latches Threaded steel rails Rear rails Built-in wheels Shock and water resistant Low-profile pull handle

Odyssey Black Label 16-Space Amp Rack with Wheels $389.99 Sturdy Odyssey Black Label ATA Amp Racks incorporate dual rack rails (front and rear), spring-loaded handles, heavy-duty casters (2 with brakes), and removable front and rear covers.

Used Odyssey Black Label Amp Rack 6 Space Rack $181.99 These new sturdy Black Label ATA Amp Racks incorporate dual rack rails (front and rear), heavy-duty rubber feet (non-wheeled versions), spring-loaded handles, and removable front and rear covers. Designed to protect and transport larger amps and other standard 19" rack mount gear.Heavy-duty ball corners Front and rear rack rails Anodized and powder coated hardware Recessed hardware and latches Limited lifetime warranty

*************************************************************
If you didn"t find what you wanted look below for Amp Rack Shock in the Amazon Marketplace.
*************************************************************

*************************************************************

A Guide to Electric Scooter Parts

When buying electric scooter parts, make sure they're compatible with your scooter. Many customers make a mistake of buying the wrong parts for their scooters.

Popular electric scooter parts are:

- Accessories - Batteries - Chains - Chargers - Controllers - Throttles

Accessories

There are different kinds of accessories available. A popular choice for a scooter's bag is a large multi-compartment bag than can be placed onto the rear cargo rack. A good bag would be made of a cloth that is high resistant to abrasions, tears and scuffs. Twin Velcro straps should hold the bag securely onto the seat rail or post.

You can also choose a basket to be placed in front. Good baskets would be those that fold out of the way when they're no longer in use. Steel construction is the best with thick enamel finish.

You should have a safety warning bell for your scooter. Some bells are made with compasses too. These bells fit all electric scooter and bicycle handlebars. Bells that have a pleasant sound and are audible are advisable.

A bike motor kit includes self-contained removable power unit, a mounting rack and mounting hardware. You can also buy this kit in local motorcycle stores.

A good headlight would have side light markers that provide additional illumination in the right and left side of the scooter. This is for visibility during nighttime.

Your helmet should cover the back of your head to protect it from backward falls. It should have an air-gulping front, top and back holes. There should be a thick shock absorbent lining inside the helmet that can be easily removed and replaced for cleaning purposes. Most importantly, helmets should be certified by the ASTM F1447 helmet standards or any country's helmet standards.

Even though some states don't require scooter drivers to wear helmets, it is still recommended to wear a helmet no matter how short the distance is.

Additional mirrors are also available as extra electric scooter parts. You can choose a round shaped mirror that is made of chrome plated steel, glass and rubber construction. There should be a safety reflector at the back of the mirror.

Batteries

There is a different range of batteries available for electric scooters. If you know the voltage, dimensions or amp hours, you will be able to choose what battery should you require.

Chains

The #25 chain is the most commonly used for electric scooters. This chain has a " spacing between each chain link and is " wide.

Chain Breakers

Chain breakers don't break the chain despite what they're called. Their function is to remove the pins that hold the chain links together. Master links are used to connect chains together in a continuous solid loop.

Chargers

Intellect Charger - An "Intellect Charger" works with electric scooters and bikes that have a 12 Volt battery or two 6 Volt batteries.

Controllers

There are speed controllers for Chinese-made electric scooters. This part helps control the speed of your scooter from full stop to full forward.

Throttles

The Hall Effect Throttle is the most common type that is used on electric scooters. They work on Chinese-made electric scooters and are sometimes called accelerators, twist bar, speed bar, turn throttle, speed control or derailleur.

Another type of throttle is the on / off throttle. This is used for medium size electric scooters.

5k Ohm Throttles are for high-end and older model electric scooters.

About the Author

Take a look at these nice mini micro scooters here.

Rolling ATA

Check out this page if you are looking for Rolling ATA

Used Gator Grr-4L Rolling Ata-Style Deluxe Rack Case $163.79 This Gator Deluxe Rolling ATA Rack Case features a rugged pullout handle, rollerblade-style recessed wheels, and lightweight polyethylene construction. Front and rear rack rails are threaded field replaceable 7mm zinc plated steel. The ATA case on wheels also has locking lids, heavy-duty twist latches, and comfortable recessed side handles. Heat-treated 10/32 bolts with protective washers included.Rugged pullout handleRoller blade style recessed wheelsLightweight polyethylene constructionFront & rear rack railsThreaded field replaceable 7mm zinc plated steel rack railsLocking lidsHeavy-duty twist latchesComfortable recessed side handlesHeat-treated 10/32 bolts with protective washers included

Gator Grr-4L Rolling Ata-Style Deluxe Rack Case $179.99 This Gator Deluxe Rolling ATA Rack Case features a rugged pullout handle, rollerblade-style recessed wheels, and lightweight polyethylene construction. Front and rear rack rails are threaded field replaceable 7mm zinc plated steel. The ATA case on wheels also has locking lids, heavy-duty twist latches, and comfortable recessed side handles. Heat-treated 10/32 bolts with protective washers included.Rugged pullout handleRoller blade style recessed wheelsLightweight polyethylene constructionFront & rear rack railsThreaded field replaceable 7mm zinc plated steel rack railsLocking lidsHeavy-duty twist latchesComfortable recessed side handlesHeat-treated 10/32 bolts with protective washers included

Gator G-Tour 20X30 Rolling Ata Mixer Road Case $319.99 The Gator G-Tour 20x30 Rolling ATA Mixer Case boasts rugged plywood construction with a solid polypropylene exterior; red Penn Elcom recessed MOL twist latches, spring-loaded rubber gripped handles, and wheels; heavy-duty chromeplated hardware; and reinforced corners. Includes foam blocks you can custom-fit to your mixer.Interior fully adjustable to firmly hold mixing console in place during transport Plywood construction Solid polypropylene exterior Red Penn Elcom recessed MOL twist latches and spring-loaded rubber-gripped handles Tongue and groove extrusion aluminum valance Heavy-duty chromeplated hardware Reinforced corners for ultimate protection 9mm thickness

Gator G-Tour 61 Ata Rolling Keyboard Flight Case $369.99 Gator's ATA-qualified keyboard flight case features plywood construction with PVC exterior. Plush interior nestles keyboard while padded straps hold it in place. Comes with 4 wedges for customizing the fit. Hardware includes spring-loaded handles, recessed wheels, and heavy-duty zinc-plated hardware.The G-TOUR 61 ATA keyboard case fits the Alesis ANDROMEDA A6, Korg M3 61, Korg M50-61, Roland FANTOM G6, Roland FANTOM X6, Roland Juno-D, Roland Juno-G, Yamaha MO6, Yamaha MOTIF XS6, and several others.Fits most digital controllers & stage pianos5mm plywood construction with PVC exteriorTongue & groove extrusion aluminum valancePlush interior with padded straps to hold keyboard in place during transportComes with 4 black polyethylene foam wedges to assist in proper fitReinforced stackable ball cornersSpring loaded handlesHeavy-duty recessed wheelsHeavy-duty zinc plated hardware

Gator G-Mix Ata Deluxe Rolling Mixer Or Equipment Case 19X21 $249.99 The Gator G-MIX ATA Mixer or Equipment Case features nearly indestructible lightweight polyethylene construction, an angled pad & velcro wedge to hold your mixer securely, a tricot-lined foam interior, completely removable lids with breakaway hinges, rubber feet, chrome-reinforced corners, 3 spring loaded carry handles, a pullout handle, roller blade style wheels and recessed lockable twist latches. Nearly indestructible lightweight polyethylene construction Angled pad & Velcro wedge to hold mixer securely Tricot-lined foam interior Completely removable lids with breakaway hinges Rubber feet Chrome reinforced corners 3 spring loaded carry handles Pull-out handle Recessed roller blade style wheels Recessed lockable twist latches

Used Gator G-Tour 20X30 Rolling Ata Mixer Road Case 886830000287 $271.99 The Gator G-Tour 20x30 Rolling ATA Mixer Case boasts rugged plywood construction with a solid polypropylene exterior; red Penn Elcom recessed MOL twist latches, spring-loaded rubber gripped handles, and wheels; heavy-duty chromeplated hardware; and reinforced corners. Includes foam blocks you can custom-fit to your mixer.Interior fully adjustable to firmly hold mixing console in place during transport Plywood construction Solid polypropylene exterior Red Penn Elcom recessed MOL twist latches and spring-loaded rubber-gripped handles Tongue and groove extrusion aluminum valance Heavy-duty chromeplated hardware Reinforced corners for ultimate protection 9mm thickness

Used Gator G-Mix Ata Rolling Pop-Up Mixer Case 8 Space 889406672628 $186.99 The Gator ATA Rolling Pop-up Mixer Case features a pop-up ratchet system for transporting your mixer flat then elevating to the angle you want. Its compact size allows for smaller transportation area requirements, and the high density polyethylene cabinet construction ensures your music mixer arrives in the same condition it was in when you left. Spring loaded twist latches and chrome plated corners for extra protection features pull-out handle, recessed wheels, field-replaceable threaded rack rails and a padded wrist rest for comfort.Pop-up ratchet systemCompact sizeHigh density polyethylene cabinet constructionSpring loaded twist latchesChrome plated cornersPull-out handle & recessed wheelsRecessed spring loaded handlesThreaded rack railsPadded wrist restRack-mountedField-replaceable threaded rack rail

Gator G-Mix Ata Rolling Pop-Up Mixer Case 8 Space $219.99 The Gator ATA Rolling Pop-up Mixer Case features a pop-up ratchet system for transporting your mixer flat then elevating to the angle you want. Its compact size allows for smaller transportation area requirements, and the high density polyethylene cabinet construction ensures your music mixer arrives in the same condition it was in when you left. Spring loaded twist latches and chrome plated corners for extra protection features pull-out handle, recessed wheels, field-replaceable threaded rack rails and a padded wrist rest for comfort.Pop-up ratchet systemCompact sizeHigh density polyethylene cabinet constructionSpring loaded twist latchesChrome plated cornersPull-out handle & recessed wheelsRecessed spring loaded handlesThreaded rack railsPadded wrist restRack-mountedField-replaceable threaded rack rail

Gator G-Mix Ata Rolling Pop-Up Mixer Case 12 Space $249.99 The Gator ATA Rolling Pop-up Mixer Case features a pop-up ratchet system for transporting your mixer flat then elevating to the angle you want. Its compact size allows for smaller transportation area requirements, and the high density polyethylene cabinet construction ensures your music mixer arrives in the same condition it was in when you left. Spring loaded twist latches and chrome plated corners for extra protection features pull-out handle, recessed wheels, field-replaceable threaded rack rails and a padded wrist rest for comfort.Pop-up ratchet systemCompact sizeHigh density polyethylene cabinet constructionSpring loaded twist latchesChrome plated cornersPull-out handle & recessed wheelsRecessed spring loaded handlesThreaded rack railsPadded wrist restRack-mountedField-replaceable threaded rack rail

Skb Skb-44Rw Ata Electric Bass Roller Case $129.99 SKB's SKB-44RW rolling bass case turns your gig bag into an ATA case. Insert your bass guitar, gig bag and all, into this indestructible shell. Slide the 2 halves together, quick-latch them, padlock if desired, then tilt the ATA bass case and roll it away on heavy-duty rubber wheels. SKB is a premier supplier of instrument and gear cases. SKB builds their products with military-spec, ultrahigh molecular weight polyethylene and premium hardware. Their Lifetime Warranty is a reflection of SKB's confidence in everything they manufacture.Innovative designRotation-molded shellQuick latchPadlock readySuper-tough wheels

Gator G-Mix Ata Rolling Mixer Or Equipment Case 20X30 Inches $219.99 Protect your valuable gear with this rugged Gator mixer case constructed of nearly indestructible lightweight polyethylene. An angled pad and Velcro wedge hold your mixer securely. Also features a tricot-lined foam interior, completely removable lids with breakaway hinges, rubber feet, carry handle, pull-out handle, wheels, and recessed locking twist latches.Nearly indestructible lightweight polyethylene construction Angled pad & Velcro wedge to hold mixer securely Tricot-lined foam interior Completely removable lids with breakaway hinges Rubber feet Carry handle Pull-out handle Wheels Recessed locking twist latches

Gator G-Mix Ata Rolling Mixer Or Equipment Case 12X24 Inches $149.99 Protect your valuable gear with this rugged Gator mixer case constructed of nearly indestructible lightweight polyethylene. An angled pad and Velcro wedge hold your mixer securely. Also features a tricot-lined foam interior, completely removable lids with breakaway hinges, rubber feet, carry handle, pull-out handle, wheels, and recessed locking twist latches.Nearly indestructible lightweight polyethylene construction Angled pad & Velcro wedge to hold mixer securely Tricot-lined foam interior Completely removable lids with breakaway hinges Rubber feet Carry handle Pull-out handle Wheels Recessed locking twist latches

Gator G-Mix Ata Rolling Mixer Or Equipment Case 22X46 Inches $289.99 Protect your valuable gear with this rugged Gator mixer case constructed of nearly indestructible lightweight polyethylene. An angled pad and Velcro wedge hold your mixer securely. Also features a tricot-lined foam interior, completely removable lids with breakaway hinges, rubber feet, carry handle, pull-out handle, wheels, and recessed locking twist latches.Nearly indestructible lightweight polyethylene construction Angled pad & Velcro wedge to hold mixer securely Tricot-lined foam interior Completely removable lids with breakaway hinges Rubber feet Carry handle Pull-out handle Wheels Recessed locking twist latches

Gator G-Mix Ata Rolling Mixer Or Equipment Case 24X36 Inches $289.99 Protect your valuable gear with this rugged Gator mixer case constructed of nearly indestructible lightweight polyethylene. An angled pad and Velcro wedge hold your mixer securely. Also features a tricot-lined foam interior, completely removable lids with breakaway hinges, rubber feet, carry handle, pull-out handle, wheels, and recessed locking twist latches.Nearly indestructible lightweight polyethylene construction Angled pad & Velcro wedge to hold mixer securely Tricot-lined foam interior Completely removable lids with breakaway hinges Rubber feet Carry handle Pull-out handle Wheels Recessed locking twist latches

*************************************************************
If you didn"t find what you wanted look below for Rolling ATA in the Amazon Marketplace.
*************************************************************

*************************************************************

Explaining Unexplained Infertility

The financial and emotional cost associated with unexplained infertility or repeated IVF failures can be devastating. So, to advise couples who have failed one or more attempts that all it would take to ultimately succeed would be to keep on trying over and over again, is both overly simplistic and disingenuous.

About seven to eight days after fertilization, the embryo’s root system begins communicating with the immune cells (lymphocytes) in the uterine lining (endometrium) through an interchange of growth factors known as cytokines. It is upon the integrity of this communicative process (known as the “cytokine network") that regulated intrusion of the embryo’s root system (that will eventually develop into the placenta) is predicated.

Thus a dysfunctional immunologic interaction between the developing conceptus and the mother can cause all kinds of reproductive problems ranging from failed implantation (presenting as “unexplained” infertility or repeated IVF failure) and miscarriage, to intrauterine growth retardation, stillbirth, fetal loss, and reduced post-birth neurologic and physical development.

It follows that proper implantation is not only a prerequisite for embryonic survival, it is also a major factor in determining intrauterine growth and development of the baby and perhaps most importantly it ultimately can influence the very quality of life after birth.

There are basically two categories of Immunologic Implantation Dysfunction (ID):

Autoimmune ID:
This is by far the most common variety. It is believed to be implicated in >90% of cases of immunologic implantation dysfunction and occurs when an immunologic reaction is produced by the individual, to his/her body’s own cellular components. The most common antibodies that form in such situations are:

a) Anti-phospholipid antibodies (APA)
b) Antithyroid antibodies (ATA)
c) Antiovarian antibodies.

But, it is only when specialized immune cells in the uterine lining known as Natural Killer (NK) Cells, become activated (NKa) and start to release “toxins” that attack the root system of the embryo, that implantation potential is jeopardized. Diagnosis of such NK cell activation (Nka) requires highly specialized blood and/or endometrial tests that can only be performed in a handful of reproductive immunology laboratories in the United States.

Since Autoimmune ID is often genetically transmitted, it is not surprising that it is more likely to exist in women who have a family (or personal) history of primary autoimmune diseases such as Lupus Erythematosus (LE), Scleroderma, clinical or subclinical hypothyroidism, Rheumatoid Arthritis etc. Reactionary (secondary) autoimmunity can occur in conjunction with any medical condition associated with widespread tissue damage. One such gynecologic condition is endometriosis.

Autoimmune ID is usually lethal to the implanting embryo. This is because it destroys the embryo’s root system from the get-go. Accordingly, it most commonly presents as “unexplained infertility” or “unexplained (often repeated) IVF failure” rather than as a miscarriage. Autoimmune ID is readily amenable to reversal through timely, appropriately administered, selective immunotherapy (see below).

Alloimmune ID:
This is relatively uncommon, accounting for less than 10% of cases of ID. Alloimmune ID is associated with a reaction to cell components (e.g sperm antigens) derived from another member of the same species (e.g., sperm). Thus, it is the sperm contribution to the embryo (i.e. the paternal antigen) that makes the embryo an allograft. It is quite remarkable therefore, that an embryo which in the vast majority of cases is immunogically “different” to the mother, thrives in her uterus. This paradoxical arrangement came about through magnificent evolutionary adaptations that allowed this to take place. Uterine immune cells (especially NK cells and T-cells) play a pivotal roll in this accommodation. They do so through a balanced release of growth factors (cytokines).

So it is that in less than 10% of IVF cases that are associated with ID the embryo (through the contribution made by the sperm) shares too many genetically similar characteristics with the host (the mother). When this happens, repeated exposures to such an embryo will over time evoke an imbalance in the cytokines released by the uterine immune cells. This is characterized by activation of uterine NK cells (Nka). In such cases the “root system” of the embryo” can be compromised and the the embryo may be destroyed immediately but most often will instead "limp" along only to miscarry when its supply of nutrients and oxygen is outstripped by demand.

Thus alloimmune ID usually does not destroy the embryo immediately. Rather, after sustained erosion of its reserve, the conceptus will miscarry.

We diagnose alloimmune ID by testing the male and female partners for shared of genetic markers known as of as DQa and HLA. A sufficient degree of matching clinches the diagnosis. We also test the embryo recipient for Nka in an attempt to measure the relative severity of the problem. This is brcause once the NK cells in the uterine lining are activated and the cytokine balance is disrupted, the situation is grave and will remain so (or worsten) unless the NKa cells are medically deactivated (down-regulated) at least 1 week in advance of the embryo(s) reaching the uterus.

It usually takes repeated exposures of uterine NK cells to an alloimmune matching embryo for these cells to become activated (NKa). Until this happens a pregnancy can be established and even proceed to a normal birth inspite of the ID. Subsequently over time, with repeated exposures of matching embryos to the mother’s uterus, NK cells will become activated and the couple will find themselves miscarrying. Eventually the NKa will become permanently established and the couple will fail to conceive. It is thus not unusual to find such couples going from having a baby together through a stage of repeated miscarriages to one of secondary infertility.

Unfortunately, immunotherapy for alloimmune ID is not as likely to be as successful as with the treatment of autoimmune ID. Selective immunotherapy is simply not invariably curative in the case of the former. While selective immunotherapy significantly improves the chances of success, in cases of alloimmune ID, it cannot assure a successful outcome.

Heparin and Aspirin Therapy
There is compelling evidence that the subcutaneous administration of regular heparin twice daily or low molecular heparin (Clexane, Lovenox) once daily, (starting with the onset of ovarian stimulation) significantly improves IVF birth rates in women who test positive for APAs.

Aspirin on the other hand, has little if any value and in my opinion. The reason for this is because it increases the potential to bleed. This effect can last for up to a week and could add bleeding risk to the egg retrieval procedure and resulting in intrauterine bleeding at the time of embryo transfer, potentially compromising IVF success.

IVIG and Intralipid Therapy
The main objective of selective immunotherapy for immunologic ID is to down-regulate (reduce toxicity) of Nka. In the past, the only effective and allowable way to accomplish in the U.S was through the intravenous infusion of a blood product known as immunoglobulin-G (IVIG). However, the administration of a blood product raised understandable concerns about the transmission of viral infections such as HIV and hepatitis.

To make matters worse, competing IVF clinics capitalized on all this bad press by raising red flags and sometimes going as far as to caution infertile couples against seeking IVF services from those who dared to offer access to IVIG. This created “a herd mentality” that severely harmed the practices of those of us who recommended selective IVIG therapy.

Notwithstanding this, we were not willing to be dissuaded by prejudice or malice from doing what we knew was the right thing and the reward for taking this stance which came in the form of thousands of babies (that otherwise would never have been born) now brightens the lives of an equivalent number of couples that otherwise would have remained childless.

In 2006, reports began to surface regarding a product called Intralipid (IL), a synthetic product which, upon being administered intravenously prior to embryo transfer, would elicit a similar regulatory effect on Nka as IVIG had achieved. In 2007 we began administering IL to patients with NKa. At first this treatment was confined to those who needed IVIG but for diverse reasons refused the treatment. Later we expanded the trial to other IVF patients with NKa. Todate we have treated more than 200 women with IL with impressive results (soon to be published). Against this background, SIRM physicians have all but abandoned IVIG, supplanting it with IL.

Compared to IVIG which costs about $4000-$5000 per infusion and can evoke unpleasant and potentially dangerous side effects, IL, when used as recommended by SIRM, is virtually devoid of risk and/or side effects and costs less than $400 per infusion (i.e. 1/10th of the cost of IVIG).

Corticosteroid Therapy (Prednisone, Prednisilone and Dexamethasone)
Steroid therapy is a mainstay in most IVF programs. Some programs prescribe daily oral methyl prednisilone while others prescribe prednisone or dexamethasone, commencing with the initiation of ovarian stimulation with gonadotropins, and continuing until after the ultrasound the diagnosis of pregnancy.

Any seed, if it is to thrive and develop into a healthy plant, requires that it be placed in a fertile soil. So also does a successful pregnancy require that an optimal seed (embryo)/soil (endometrium) relationship be established.

In about 70% of cases, reproductive failure is due to poor embryo “competency” issues, while in 30% of cases, a non-receptive endometrium is the reason for failure. It follows that with IVF, focusing entirely on embryo (seed) quality will not reduce the risk of failure in patients with endometrial receptivity (soil) problems.

The evaluation for immunologic dysfunction as well as for other factors that can affect implantation should form part of the evaluation of patients preparing to undergo IVF, and especially so in women with recurrent pregnancy loss (RPL), women with a personal or family history of autoimmune conditions, and women with “unexplained” infertility or IVF failure(s).

-------------------------------------------------------------------------------------------------------

Visit the SIRM Website at www.haveababy.com

Read Dr. Sher's blog at www.ivfauthority.com

 

About the Author

Geoffrey Sher, MD is founder and Executive Medical Director of the Sher Institutes for Reproductive Medicine (SIRM) www.haveababy.com
He is a pioneer in the field of infertility and IVF, having founded the first privately owned IVF clinic in the United States.

Shock Mount Amp

Check out this page if you are looking for Shock Mount Amp

Nady SSM-3 Shock Mount $14.99 The Nady SSM-3 Shock Mount fits Nady SCM 900/910/920/1000 and TCM 1000 studio microphones.

Nady Ssm-3 Shock Mount $14.99 The Nady SSM-3 Shock Mount fits Nady SCM 900/910/920/1000 and TCM 1000 studio microphones.

Gibraltar Drum Rack Shock Microphone Mount $19.99 Mount microphones right from your rack, comes with shock mount.

Musician's Gear Studio Microphone Shock Mount Black Condenser $16.99 The Musician's Gear Studio Microphone Shock Mount fits most large diaphragm condenser mics (42-48mm diameter) including the OSM-800. The mount includes a die-cast steel adapter with 5/8"-27 threads. The shock mount's angle adjustment includes a locking knob and the mount attaches to any microphone boom.

Musician's Gear Studio Microphone Shock Mount Champagne Condenser $15.99 The Musician's Gear Studio Microphone Shock Mount fits most large diaphragm condenser mics (42-48mm diameter) including the OSM-800. The mount includes a die-cast steel adapter with 5/8"-27 threads. The shock mount's angle adjustment includes a locking knob and the mount attaches to any microphone boom.

Audio-Technica At8410a Shock Mount $48.95 Audio-Technica shock mounts provide excellent mechanical isolation while offering unusual versatility and ease of use. Equally adapted to cylindrical and tapered microphones, they attenuate noise, shock and vibration transmitted through microphone stands, booms and fixed microphone mounts. The AT8410a permits easy microphone insertion and removal without detaching the mic cable; its spring-loaded clamp holds even heavy tapered microphones securely. The AT8415's lightweight and low profile make it an excellent choice for "fishpole" booms and for video use. The AT8410a mounts directly to any stand with standard 5/8"-27 threads, and includes a constant-tension clutch and 180 degreesswivel for easy, positive microphone adjustment. Isolation is accomplished with elastic shock cord. Microphones mechanically coupled to a stage or other resonant surface. And in live entertainment, shock mounts minimize noise from the movement of instruments as well as the pickup of high-level energy transmitted from nearby speakers. Attenuates noise, shock and vibration transmitted through mic stands, booms and mounts Spring-clip fits most tapered and cylindrical microphones Permits easy microphone insertion and removal without detaching mic cable Compatible with 5/8"-27 threaded stands Fits Audio-Technica Case Style(s): S1, S2, S3, S4, S7, S8, S9, S10, SG1, SG2, SG3, T1, T2, T3, T4

Royer Rsm-1 Professional Shock Mount Black $235 The Royer RSM-1 was designed for maximum shock protection, durability, ease of use and versatility. Not to mention that it's got a Royer logo and looks sharp. It's made of high-tech materials that will hold up for many years, and it doesn't use elastic bands that can stretch out over time.All good studio microphones should be placed in shock mounts for recording. Microphone shock mounts keep vibrations from making their way up the mic stand, transferring into the microphone and showing up on your tracks as unwelcome noise. Sometimes vibration-related noise that's unnoticeable while you're tracking shows up when you master, then suddenly it's "What's up with the thumps and noise in the bottom end?" Oops - should've used a shock mount!The RSM-1's ability to angle your Royer will protect the ribbon from stretching when miking very high-SPL sources, such as kick drums and guitar amps.Specifically designed to support Royer R-121, R-122, SF-12 and SF-1 microphones.

Sterling Audio STSM7 Shock Mount for ST77 & ST79 Mics $49.99 The STSM7 from Sterling Audio is a replacement shock mount for your ST77 or ST79 condenser microphones. This mount attaches to your stand and keeps your mic from recording unwanted, accidental vibrations from the stand.

Sterling Audio Stsm7 Shock Mount For St77 & St79 Mics $49.99 The STSM7 from Sterling Audio is a replacement shock mount for your ST77 or ST79 condenser microphones. This mount attaches to your stand and keeps your mic from recording unwanted, accidental vibrations from the stand.Replacement shock mount for the Sterling ST77 and ST79 micsKeeps your sound shock-free by compensating for vibrations from the mic stand

Used Sterling Audio Stsm7 Shock Mount For St77 & St79 Mics $45.49 The STSM7 from Sterling Audio is a replacement shock mount for your ST77 or ST79 condenser microphones. This mount attaches to your stand and keeps your mic from recording unwanted, accidental vibrations from the stand.Replacement shock mount for the Sterling ST77 and ST79 micsKeeps your sound shock-free by compensating for vibrations from the mic stand

Sabra Som Ssm-1 Universal Shock Mount For Microphones $49.99 Studio engineers have long known the necessity for good shock mounts in getting the real sound of any mic, but the prices of some studio-quality systems are pretty outrageous. With the Sabra-Som SSM-1, small project studios can now have the same quality shock mounts as the large studios for every mic in the cabinet and at a fraction of the cost! Sabra-Som SSM-1 Universal Shock Mount, First Take:Improves sound quality dramatically by isolating mic from standFits any diameter mic up to 2"Adjusts to compensate for mic's center of gravity, form heavy tube mic to lavalier micShock Mount Isolation Improves Sound Quality DramaticallyWhen a microphone picks up an audio signal, it also picks-up unwanted mechanical noise through the microphone stand. This is caused by vibrations in the vicinity such as the kick drum, low frequencies from amplifiers, an artist's movements, etc., etc. It's common for people to seek an electronic solution to this problem, such as use of a noise gate, re-equalization (elimination of low frequencies), etc. Such signal manipulations interfere with the dynamics of the reproduced sound, reducing headroom and degrading signal quality and "naturalness." The SSM-1 (Universal Noise Suppressor Microphone Support) was created to provide acoustic solutions for acoustic problems. We have tried lots of solutions, but the Sabra-Som SSM 1 decouples the mic from "thumps" better than anything else we know of, regardless of price. By physically isolating the microphone from its stand, the SSM-1 reduces undesirable noises up to 15dB.Acoustic improvements from using the SSM-1 are often drastic and immediate.Not just for the studio, the SSM-1 also allows the live engineer to recover the low end and low-mid efficiency of the system while sourcing the true response of the mic.Fits any diameter mic up to 2", from heavy tube mic to lavalierThis clever little design uses powerful elastics on two rings that can be moved closer or farther apart along a hexagonal metal bar. You can mount anything in SSM1 from a heavy large diaphragm tube mic to a lavalier. It's versatility in mounting methods and adjustments makes the SSM-1 compatible with almost all shapes, sizes and types of microphone on the market, up to 2" in diameter. To correctly mount a microphone, simply weave it through the parallel, high-quality, braid-covered elastic bands of each ring, two by two. Adjustable Weight SupportThe central articulated support can be adjusted and moved along a hexagonal rod to compensate for any imbalance in the set-up's center of gravity. For heavier mics, insert the body of the mic into the bands without weaving, to retain the elasticity. Then, if necessary, add an additional ring to the bar, by the bottom part of the mic, and weave it around the XLR connector, thus placing the weight of the mic on 3 rings at once.

Musician's Gear Symmetrical Studio Microphone Shock Mount Pencil Mic $21.99 The MY-420 is ideal for the stage or studio and fits most pencil-style condenser microphones, most dynamic or condenser handheld mics and some cylindrically-shaped ribbon mics. Features a symmetrical shock-mount design, an angle adjustment with locking knob and a pre-tested suspension cord with expandable woven jacket. Black powder coat finish.Pre-tested suspension cord with expandable woven jacketErgonomic adjustment knob angles and locks in position. Attaches to 5/8"- 27 threaded stands or boomsClothes-pin style clip with heavy-duty spring for equal pressureSymmetrical shock-mount system permits balance and isolation from noise, shock and vibration

*************************************************************
If you didn"t find what you wanted look below for Shock Mount Amp in the Amazon Marketplace.
*************************************************************

*************************************************************

Concern for child's safety near breaker panel.?

A child is sleeping in a room with a breaker panel mounted in the wall just above her head. The panel is a 200 amp service. The panel is in an adjacent room. Is there any concern due to the proximity of the panel. Not concerned about shocks, just some electromagnetic waves. Like what has been rumored about high voltage transmission lines.
The panel is not in the child's bedroom but in an adjacent utility room that shares a wall with the child's room. The panel does meet code for accessability.

This is a good question. It deserves a complete response.

First, the electromagnetic fields from high-tension lines are indeed a matter of concern and controversy. One reason is that the fields from the individual wires do not cancel each out. I won't go any deeper here about why that is, but suffice to say that high-tension wires DO produce significant fields at ground level. There has always been debate over whether these fields are harmful; for one thing, the frequency is only 60 Hz; for another, they have never demonstrably affected cattle that graze under them, so this question remains to be settled.

Now for your situation: The breaker box is fed with single-phase 230 VAC. This produces very low fields AND, because the wires tend to run in pairs, every amp in is equalled by one out, so the fields tend to cancel. Furthermore, they're inside a metal box, which acts as a Faraday cage, which contains the fields.

Bottom line, sensitive instruments might detect a weak field on the child's side of the wall, but it is nothing to worry about. The actual energy exposure from the circuit box is low compared to other sources that we are all exposed to all the time, such as: microwave ovens (shielded, but they can leak); radio and TV transmitters (if nearby); cell phones, cosmic rays, electric motors and even sunlight.

Gator Case Flute

Check out this page if you are looking for Gator Case Flute

Gator Gc Series Deluxe Abs Flute Case $39.99 The Gator ABS flute case is made to meet the requirements of both professional and student band players. This hardshell case has an ABS exterior and a rigid EPS interior, which is similar to the way a motorcycle helmet is constructed. The interior has soft foam in addition to plush lining to protect the instrument. D rings on the flute case make it easy to add a shoulder strap. For added longevity, every rivet has a backing plate.

Gator Flute Messenger Bag With Ipod Storage Digital Camo $54.99 This stylish Gator Flute Messenger Bag is made of tough 600-denier nylon and EPS foam with plush interior. Features an iPod/MP3 storage pocket, and earbud grommets allow for listening to tunes while your player remains safe inside. Strap is adjustable, and includes a removable keychain ring. Keep your piccolo close by with the internal piccolo case pocket.The flute bag also features three internal accessory pockets, a rear full-size sheet music pocket, zippered change compartment, and large external pocket.Tough nylon constructionEPS foam and plush interiorInternal piccolo case pocketiPod/MP3 storage pocketAccessory, sheet music, and change pockets

Gator Gl Series Flute Case Black $29.99 Plush-covered dense EPS foam interior. 600-Denier nylon exterior. Exciting new colors. Reinforced with nylon webbing. Reinforced padded handles. Nylon pocket and mesh pockets. Elastic adjustable external tie downs. Fits B & C foot styles.600-Denier nylon exteriorDense EPS foam interiorPlush inner liningReinforced padded handlesNylon pocket and mesh pocketsElastic adjustable external tie downsFits B & C foot styles

Gator Gl Series Flute Case Red $32.99 Plush-covered dense EPS foam interior. 600-Denier nylon exterior. Exciting new colors. Reinforced with nylon webbing. Reinforced padded handles. Nylon pocket and mesh pockets. Elastic adjustable external tie downs. Fits B & C foot styles.600-Denier nylon exteriorDense EPS foam interiorPlush inner liningReinforced padded handlesNylon pocket and mesh pocketsElastic adjustable external tie downsFits B & C foot styles

Gator Gl Series Flute Case Blue $32.99 Plush-covered dense EPS foam interior. 600-Denier nylon exterior. Exciting new colors. Reinforced with nylon webbing. Reinforced padded handles. Nylon pocket and mesh pockets. Elastic adjustable external tie downs. Fits B & C foot styles.600-Denier nylon exteriorDense EPS foam interiorPlush inner liningReinforced padded handlesNylon pocket and mesh pocketsElastic adjustable external tie downsFits B & C foot styles

Gator Gl Series Flute Case Pink $32.99 Plush-covered dense EPS foam interior. 600-Denier nylon exterior. Exciting new colors. Reinforced with nylon webbing. Reinforced padded handles. Nylon pocket and mesh pockets. Elastic adjustable external tie downs. Fits B & C foot styles.600-Denier nylon exteriorDense EPS foam interiorPlush inner liningReinforced padded handlesNylon pocket and mesh pocketsElastic adjustable external tie downsFits B & C foot styles

Gator Flute Metro Bag Black $54.99 The Gator Flute Metro Bag is a stylish way to transport your flute safely from performance to performance. The Flute Metro Bag has a 600-Denier nylon covered EVA exterior. Plush-covered EPS foam nests on the inside to hold your flute after you break it down. A large, exterior pocket has an iPod pocket section with an ear bud grommet and key chain holder. The Gator Flute Metro Bag has a top carry handle as well as a back shoulder strap for easy transport.Fits 1 Flute Black 600-Denier nylon covered EVA exterior Plush covered EPS foam nest Exterior pocket with iPod section and ear bud grommet Shoulder strap & carry handle Key chain holder #8 Zipper

Gator Flute Metro Bag Red $54.99 The Gator Flute Metro Bag is a stylish way to transport your flute safely from performance to performance. The Flute Metro Bag has a 600-Denier nylon covered EVA exterior. Plush-covered EPS foam nests on the inside to hold your flute after you break it down. A large, exterior pocket has an iPod pocket section with an ear bud grommet and key chain holder. The Gator Flute Metro Bag has a top carry handle as well as a back shoulder strap for easy transport.Fits 1 Flute Black 600-Denier nylon covered EVA exterior Plush covered EPS foam nest Exterior pocket with iPod section and ear bud grommet Shoulder strap & carry handle Key chain holder #8 Zipper

Gator Flute Metro Bag Pink $54.99 The Gator Flute Metro Bag is a stylish way to transport your flute safely from performance to performance. The Flute Metro Bag has a 600-Denier nylon covered EVA exterior. Plush-covered EPS foam nests on the inside to hold your flute after you break it down. A large, exterior pocket has an iPod pocket section with an ear bud grommet and key chain holder. The Gator Flute Metro Bag has a top carry handle as well as a back shoulder strap for easy transport.Fits 1 Flute Black 600-Denier nylon covered EVA exterior Plush covered EPS foam nest Exterior pocket with iPod section and ear bud grommet Shoulder strap & carry handle Key chain holder #8 Zipper

Gator Flute Metro Bag Blue $54.99 The Gator Flute Metro Bag is a stylish way to transport your flute safely from performance to performance. The Flute Metro Bag has a 600-Denier nylon covered EVA exterior. Plush-covered EPS foam nests on the inside to hold your flute after you break it down. A large, exterior pocket has an iPod pocket section with an ear bud grommet and key chain holder. The Gator Flute Metro Bag has a top carry handle as well as a back shoulder strap for easy transport.Fits 1 Flute Black 600-Denier nylon covered EVA exterior Plush covered EPS foam nest Exterior pocket with iPod section and ear bud grommet Shoulder strap & carry handle Key chain holder #8 Zipper

Gator Wireless Mic Case $99.99 The Gator wireless microphone case is a lightweight, durable hardshell case that accommodates six oversized wireless microphones and has holes cut for 12 AA batteries and 6 9V batteries. It features a red rubber grip handle and dual latches, as well as a protective foam interior. This case is ideal for a capella groups or any group that uses multiple handheld wireless microphones. It affordably and safely solves what can be a challenging equipment transport challenge.

Gator Gkpe-88Slim-Tsa 88-Key Keyboard Case $349.99 The Gator GKPE-88SLIM-TSA keyboard case is made for 88-key music keyboards. With an ATA (airliner approved), molded polyethylene outer shell, TSA latches, wheels, and reduced interior depth this Gator keyboard case is nearly indestructible. The case's wedge-and-block design makes it easy to customize the interior to give your case the level-of-protection you need while traveling with your precious keyboard. Gator's keyboard case is equipped with 4 fixed hinges; 2 TSA-locking latches with impact-diversion dishes; 2 rubber-gripped handles with 130 lb capacity; and recessed, 200 lb capacity in-line wheels. A solid aluminum valance and a black, powder-coated finish give the Gator 88-key keyboard case a professional look.Interior dimensions: 6" H x 54" W x 15" D Exterior dimensions: 10" H x 60.24" W x 19-1/2" D Weight: 29 lb.

Gemeinhardt CC3 Flute/Piccolo Case $89.99 Combo case for C-foot flute and piccolo with plush-lined protection.

Gemeinhardt Cc3 Flute/Piccolo Case $89.99 Combo case for C-foot flute and piccolo with plush-lined protection.

*************************************************************
If you didn"t find what you wanted look below for Gator Case Flute in the Amazon Marketplace.
*************************************************************

*************************************************************

Amplifier Rack Case

Check out this page if you are looking for Amplifier Rack Case

*************************************************************
For More choices check out Amplifier Rack Case some of our other merchants.
*************************************************************

Road Runner Deluxe 16U Amplifier Rack Case Black $299.99 16-space amplifier deluxe hardshell rack case - 18" body depth.Spring handle, aluminum reinforced edges, steel reinforced corners, twist latches.

Road Runner Deluxe 12U Amplifier Rack Case Black $249.99 12-space amplifier deluxe hardshell case - 18" body depth.Spring handle, aluminum reinforced edges, steel reinforced corners, twist latches.

Road Ready RR12UADSW 12U Deluxe Shock Mount Amplifier Rack Case Black $529.99 Built to take a pounding and come back for more, the RR12UADSW 12U Deluxe Shock Mount Amplifier Rack Case protects your gear from even the most groundbreaking abuse. Crafted with an exclusive case-within-a case design that features unique integral suspension system, the RR12UADSW provides unparalleled protection against even the most rigorous trauma. Built with dual rack rails for flexibility (mounted front and back) and two removable covers for easy access to your the RR12UADSW features 12Us of rack space. Includes beefy 3-1/2" casters for easy mobility.

Road Ready Rr12uadsw 12U Deluxe Shock Mount Amplifier Rack Case Black $529.99 Built to take a pounding and come back for more, the RR12UADSW 12U Deluxe Shock Mount Amplifier Rack Case protects your gear from even the most groundbreaking abuse. Crafted with an exclusive case-within-a case design that features unique integral suspension system, the RR12UADSW provides unparalleled protection against even the most rigorous trauma. Built with dual rack rails for flexibility (mounted front and back) and two removable covers for easy access to your the RR12UADSW features 12Us of rack space. Includes beefy 3-1/2" casters for easy mobility.Beefy, stackable ball corners Double anchor industrial rivets Recessed, industrial grade latches Recessed, spring loaded handles Industrial grade rubber feet Premium 3/8" vinyl laminated plywood Tongue and groove locking fit Heavy duty rack rails Mounting hardware included Shock mount technology 3-1/2" heavy-duty caster ATA 300 rating

Used Road Ready Rr12uadsw 12U Deluxe Shock Mount Amplifier Rack Case Black 886830222580 $339.19 Built to take a pounding and come back for more, the RR12UADSW 12U Deluxe Shock Mount Amplifier Rack Case protects your gear from even the most groundbreaking abuse. Crafted with an exclusive case-within-a case design that features unique integral suspension system, the RR12UADSW provides unparalleled protection against even the most rigorous trauma. Built with dual rack rails for flexibility (mounted front and back) and two removable covers for easy access to your the RR12UADSW features 12Us of rack space. Includes beefy 3-1/2" casters for easy mobility.Beefy, stackable ball corners Double anchor industrial rivets Recessed, industrial grade latches Recessed, spring loaded handles Industrial grade rubber feet Premium 3/8" vinyl laminated plywood Tongue and groove locking fit Heavy duty rack rails Mounting hardware included Shock mount technology 3-1/2" heavy-duty caster ATA 300 rating

Eurolite 10x2 Mixer/Amp Combo Rack Case 10X2 U $119.99 This 10U music mixer, 2U amplifier combo rack case is a perfect solution for the musician or DJ on the road. DJs with rack mountable CD players will now be able to consolidate their whole setup into one portable case. Constructed of 3/8" black laminated plywood and features recessed handles, latches and steel ball corners.

Eurolite 10x4 Mixer/Amp Combo Rack Case 10X4 U $129.99 This 10U audio mixer, 4U amplifier combo rack case is a perfect solution for the musician or DJ on the road. DJs with rack mountable CD players will now be able to consolidate their whole setup into one portable case. Constructed of 3/8" black laminated plywood and features recessed handles, latches and steel ball corners.

Eurolite 10x6 Mixer/Amp Combo Rack Case 10X6 U $149.99 This 10U music mixer, 6U amplifier combo rack case is a perfect solution for the musician or DJ on the road. DJs with rack mountable CD players will now be able to consolidate their whole setup into one portable case. Constructed of 3/8" black laminated plywood and features recessed handles, latches and steel ball corners.

Eurolite 10x8 Mixer/Amp Combo Rack Case 10X8 U $199.99 This 10U audio mixer, 8U amplifier combo rack case is a perfect solution for the musician or DJ on the road. DJs with rack mountable CD players will now be able to consolidate their whole setup into one portable case. Constructed of 3/8" black laminated plywood and features recessed handles, latches and steel ball corners.

Eurolite 10U 19 Rack Mount Amp Case 10U $199.99 This 10U rack mount amplifier case is built to last the abuse and rigors of daily use. Constructed of 3/8" black laminated plywood, it has chrome recessed handles and latches and steel ball corners for extra protection. Rack rails included.

Eurolite 4U 19 Rack Mount Amp Case 4U $119.99 This 4U rack mount amplifier case is built to last the abuse and rigors of daily use. Constructed of 3/8" black laminated plywood, it has chrome recessed handles and latches and steel ball corners for extra protection. Rack rails included.

Eurolite 12U 19 Rack Mount Amp Case w/Casters 12U $229.99 This 12U rack mount amplifier case is built to last the abuse and rigors of daily use. Constructed of 3/8" black laminated plywood, it has chrome recessed handles and latches and steel ball corners for extra protection. Rack rails and heavy-duty 4" casters included

Eurolite 6U 19 Rack Mount Amp Case 6U $129.99 This 6U rack mount amplifier case is built to last the abuse and rigors of daily use. Constructed of 3/8" black laminated plywood, it has chrome recessed handles and latches and steel ball corners for extra protection. Rack rails included.

Eurolite 14U 19 Rack Mount Amp Case with Casters 14U $249.99 This 14U rack mount amplifier case is built to last the abuse and rigors of daily use. Constructed of 3/8" black laminated plywood, it has chrome recessed handles and latches and steel ball corners for extra protection. Rack rails and heavy-duty 4" casters included

*************************************************************
If you didn"t find what you wanted look below for Amplifier Rack Case in the Amazon Marketplace.
*************************************************************

Where can i find a rack case to fit my behringer xenyx 1832fx mixer?

It also needs to fit a cd player(one with 2 drives and a seperate control console), amplifier, karaoke( again with 2 drives and a seperate control console), rack light and wireless mic receivers.
Many thanks,
Snowman

Try eBay, I bought a lot of mixers there, and there is lots of other stuff that may be what you need