Space Rack Mount
Check out this page if you are looking for Space Rack Mount

|
Odyssey Black Label Amp Rack 4 Space Rack
$169.99
These new sturdy Black Label ATA Amp Racks incorporate dual rack rails (front and rear), heavy-duty rubber feet (non-wheeled versions), spring-loaded handles, and removable front and rear covers. Designed to protect and transport larger amps and other standard 19" rack mount gear.
|

|
Odyssey Black Label Amp Rack 8 Space Rack
$219.99
These new sturdy Black Label ATA Amp Racks incorporate dual rack rails (front and rear), heavy-duty rubber feet (non-wheeled versions), spring-loaded handles, and removable front and rear covers. Designed to protect and transport larger amps and other standard 19" rack mount gear.
|

|
Odyssey Black Label Amp Rack 6 Space Rack
$181.99
These new sturdy Black Label ATA Amp Racks incorporate dual rack rails (front and rear), heavy-duty rubber feet (non-wheeled versions), spring-loaded handles, and removable front and rear covers. Designed to protect and transport larger amps and other standard 19" rack mount gear.
|

|
Used Odyssey Black Label Amp Rack 6 Space Rack
$181.99
These new sturdy Black Label ATA Amp Racks incorporate dual rack rails (front and rear), heavy-duty rubber feet (non-wheeled versions), spring-loaded handles, and removable front and rear covers. Designed to protect and transport larger amps and other standard 19" rack mount gear.Heavy-duty ball corners Front and rear rack rails Anodized and powder coated hardware Recessed hardware and latches Limited lifetime warranty
|

|
Sennheiser Ga 3 Rack Mount Adapter
$39.95
The Sennheiser GA 3 Rack-Mount Adapter mounts 2 G3 EM receivers or two Sennheiser SR transmitters side-by-side in one rack space. Use the GA 3 to rack a single Sennheiser EM/SR. When using the single option, use the 2 holes for the AM2 antenna front mount relocation kit, located in the included front panel. Mount the antennas up front where reception is vastly improved over being stuck in the back of your rack.
|

|
Odyssey Carpeted Pro Rack 18-1/2 Depth 6 Space
$149.99
Racks feature plywood construction, metal hardware, heavy-duty pre-tapped rack rails, recessed large grip handles, recessed flush mount lids with latches, and large heavy-duty stackable ball corners. 2 handles.
|

|
Odyssey Carpeted Pro Rack 18-1/2 Depth 8 Space
$169.99
Racks feature plywood construction, metal hardware, heavy-duty pre-tapped rack rails, recessed large grip handles, recessed flush mount lids with latches, and large heavy-duty stackable ball corners. 2 handles.
|

|
Odyssey Carpeted Pro Rack 18-1/2 Depth 4 Space
$124.99
Racks feature plywood construction, metal hardware, heavy-duty pre-tapped rack rails, recessed large grip handles, recessed flush mount lids with latches, and large heavy-duty stackable ball corners. 2 handles.
|

|
Used Odyssey Carpeted Pro Rack 18-1/2 Depth 8 Space
$154.69
Racks feature plywood construction, metal hardware, heavy-duty pre-tapped rack rails, recessed large grip handles, recessed flush mount lids with latches, and large heavy-duty stackable ball corners. 2 handles.
|
*************************************************************
If you didn"t find what you wanted look below for Space Rack Mount in the Amazon Marketplace.
*************************************************************
 |
Odyssey ARS1 1 Space Rack Shelf Accessory
List Price: $29.99
Sale Price: $14.95
|
|
|
Odyssey's metal rack shelves are perfect for gear without rack ears. Especially well suited for studio and permanent installation. The ARS1 takes up 1u or 1.75" of rack space and is 10" deep. Use Odyssey's clamping rack shelves (ASC2-4) for mounting gear in a rack that will be transported...
|
 |
Odyssey ARS2 2 Space Rack Shelf Accessory
List Price: $37.99
Sale Price: $26.50
|
|
|
Odyssey's metal rack shelves are perfect for gear without rack ears. Especially well suited for studio and permanent installation. The ARS2 takes up 2u or 3.5" of rack space and is 14.5" deep. Use Odyssey's clamping rack shelves (ASC2-4) for mounting gear in a rack that will be transported...
|
 |
American Dj Pc-100A Rack Mount Power Switcher
List Price: $39.95
Sale Price: $29.99
Used From: $26.99
|
|
|
A must for every DJ! Designed to eliminate extension cords and messy wires, the PC100A features 8 lighted switches and a 15A resettable circuit breaker right on the front panel. Ideal for switching lights and sound equipment...
|
 |
OnStage RS7030 Rack Stand
List Price: $39.60
Sale Price: $25.99
Used From: $20.26
|
|
|
This stand is so convenient it can be placed just about anywhere, on stage, in the studio, even atop a cabinet, amp or rack. Guitarists will love having effects at their fingertips instead of hiding inside a large rack case...
|
 |
Odyssey ARDP03 3 Space Pro Rack Drawer Accessory With Lock
List Price: $119.99
Sale Price: $49.99
|
|
|
Odyssey's heavy-duty steel rack drawers are well constructed for maximum strength and stability. All Odyssey ARDP series rack drawers feature cabinet grade full extension sliders for smooth action, flush-mount latches, and security key locks...
|
 |
Technical Pro DRW-2U 2U Rack Mountable Drawer (Black)
List Price: $65.00
Sale Price: $37.66
|
|
|
Technical Pro’s groundbreaking new approach to industrial design incorporates advanced technology and striking good looks with rugged construction and a long list of features, providing years of audio enjoyment.
|
 |
SKB 4U Shallow X Rack
List Price: $189.99
Sale Price: $109.86
Used From: $109.85
|
|
|
New 10-1/2' depth X-Racks accommodate a wider variety of components such as: effects processors from Line 6 and DigiTech; dbx compressors and Rack Rider EQs; power conditioners from Furman & Samson; bass amps from SWR & GK, line mixers, wireless receivers from Shure & Sony, CD and cassette players...
|
 |
SKB 6U Space Rack with In-line Wheels, TSA Latches, and Handle
List Price: $359.99
Sale Price: $194.99
|
|
|
SKB Roto Molded Rolling Rack Case is ideal for those looking to transport heavy recording and sound reinforcement equipment to even the most remote locations. The SKB Roto Molded cases are a complete upgrade and stronger alternative to the existing Rolling Rack models, featuring industrial grade steel, threaded rack rails and full access rear lids...
|
 |
SKB 2U Space Roto Molded Rack
List Price: $179.99
Sale Price: $89.99
|
|
|
The SKB US Heavy Duty Roto Racks are the ultimate in American technology. Featuring a roto molded tuff shell, front and rear lids, recessed heavy-duty twist latches, molded in handles, shock absorbing rubber feet and the recognizable patented deep Roto-X pattern for solid stackability...
|
*************************************************************
Replacing One Fork For Another,Work?
Hi,
I'm going to replace my bike suspension fork to a rigid fork.(Not me,another person will do the work)I just need to know if the rigid fork specs are ok for a replacement fit in my bike.What say you? Thanks!
EXISTING SUSPENSION FORK:
* 26" inch wheel compatible
* Steerer tube 1.1/8"inch Threadless 255mm long
* Travel 50mm
* Coil spring suspension
* V-brake compatible
NEW RIGID FORK :
Surly Long Haul Trucker Fork 26 Inch
* 100% CroMoly construction, fully brazed crown, double eyelet dropouts, cantilever bosses, and midblade lowrider rack mounts
* Steerer Tube: 1-1/8" Threadless
* Steerer Tube Length: 300.0 mm
* Brake Usage F/R: Front
* Crown Race: 30.0
* Wheel Size: 26"
* Front Hub Spacing: 100 mm
* Front Axle Type: 9x1
* Fork Rake: 45 mm
* Axle to Crown Length: 376 mm
* Material: CrMo
The new fork will fit onto the bike...both the old and new are 1-1/8" threadless and the steerer tube on the new fork is longer than that on the old fork. Your bike shop will cut down the steerer tube on the new fork, if necessary, to get everything to fit up.
Before you commit, do some checking on the old fork setup to understand its rake and typical distance from the top of the fork's crown to the axle. These measurements will give you some idea how the bike will "sit" with the new fork on. As long as the new fork is close to the old, no big deal. If it's way different, though, you will likely notice differences in handling. This is not a reason not to make the swap; it's just to be aware so you're not surprised.
Good luck!
Pedal Board
Check out this page if you are looking for Pedal Board
*************************************************************
For More choices check out Pedal Board some of our other merchants.
*************************************************************

|
Hammond XK-Pedal Board
$2085
This 25 note MIDI pedal board mates perfectly with the Hammond XK-System stand, bench and keyboards to to make a gorgeous, rockin' organ setup. Includes an expression output.
|

|
Hammond Xk-Pedal Board
$2085
This 25 note MIDI pedal board mates perfectly with the Hammond XK-System stand, bench and keyboards to to make a gorgeous, rockin' organ setup. Includes an expression output. 25 keysMIDI out, expression outDimensions: 42"W x 37"D x 6"Weight: 55 lbs
|

|
Roland Pk-25 Pedal Board For Vk-77
$2774.5
The Roland PK-25 is a 25-note pedalboard developed for use with the VK-77 Combo Organ. Designed for players who are used to console-type organs, its larger pedalboard is perfect for playing jazz bass lines. Detachable expression pedal with 2 footswitches for rotary and brake control, parameter control, and more. The Roland PK-25 Pedal Board's radiating pedal layout provides authentic touch. Hold switch for sustaining notes.25-note pedalboard for the VK-77Detachable expression pedal2 footswitches for various controlsRadiating pedal layoutHold switch
|

|
Gator Pedal Bone Pedal Board With Wave Black Bag
$79.99
The Gator Pedal Bone Pedal Board is perfect for arranging and transporting up to 4 effects pedals and 1 expression pedal. Made of molded polyethylene, this pedal board is gig-ready and comes with a 9v daisy chain power supply and a custom carry bag for added protection.USA-Made rigid polyethylene pedal boardCan accommodate up to 5 stomp boxes9v daisy chain power supplyHook and loop angled surface for pedal mountingWave Black style Convenient carry bag with accessory pocketCarry bag also available in various styles
|

|
Gator Pedal Bone Pedal Board With Wave Grey Bag
$79.99
The Gator Pedal Bone Pedal Board is perfect for arranging and transporting up to 4 effects pedals and 1 expression pedal. Made of molded polyethylene, this pedal board is gig-ready and comes with a 9v daisy chain power supply and a custom carry bag for added protection.USA-Made rigid polyethylene pedal boardCan accommodate up to 5 stomp boxes9v daisy chain power supplyHook and loop angled surface for pedal mountingWave Black style Convenient carry bag with accessory pocketCarry bag also available in various styles
|

|
Gator Pedal Bone Pedal Board With Gothic Pink Bag
$79.99
The Gator Pedal Bone Pedal Board is perfect for arranging and transporting up to 4 effects pedals and 1 expression pedal. Made of molded polyethylene, this pedal board is gig-ready and comes with a 9v daisy chain power supply and a custom carry bag for added protection.USA-Made rigid polyethylene pedal boardCan accommodate up to 5 stomp boxes9v daisy chain power supplyHook and loop angled surface for pedal mountingWave Black style Convenient carry bag with accessory pocketCarry bag also available in various styles
|

|
Gator Pedal Bone Pedal Board With Tribal Red Bag
$79.99
The Gator Pedal Bone Pedal Board is perfect for arranging and transporting up to 4 effects pedals and 1 expression pedal. Made of molded polyethylene, this pedal board is gig-ready and comes with a 9v daisy chain power supply and a custom carry bag for added protection.USA-Made rigid polyethylene pedal boardCan accommodate up to 5 stomp boxes9v daisy chain power supplyHook and loop angled surface for pedal mountingWave Black style Convenient carry bag with accessory pocketCarry bag also available in various styles
|

|
Boss Bcb-60 Pedal Board
$169
The BOSS BCB-60 Pedal Case makes setup, breakdown and storage simple. Its padded interior protects and holds your effects pedals in place. The BCB-60 holds a wide range of gear including Boss compact and Twin pedals and select stompbox models from other manufacturers. A convenient AC adapter supplies power for up to 7 devices.
|

|
Mighty Bright Pedal Board Light Black
$24.99
The Pedal Board Light is a must for anyone who uses effect pedals on stage! Two red LEDs, for night vision, allow the performer to light the pedal board without effecting the stage lighting. Two white LEDs give additional lighting for seeing set lists at the musician's feet. A great tool for backstage too!
|

|
Gator G-Mini Bone Pedal Board Mini Version
$49.99
The Gator G-Mini Bone Pedal Board is perfect for arranging and transporting up to 3 effects pedals. Made of molded polyethylene, this pedal board is gig-ready and comes with a custom carry bag for convenient protection. USA made rigid polyethylene pedal board which can accommodate up to 3 stomp boxes Hook & loop angled surface for pedal mounting Convenient 'cinch' tote carry bag with accessory pocket
|

|
Gator G-Mega Bone Pedal Board With Padded Bag
$109.99
The Gator G-Mega Bone Pedal Board is perfect for arranging and transporting a number of effects pedals. Made of molded polyethylene, this pedal board is curved to offer maximum playing efficiency. It's gig ready and comes with a 9v daisy chain power supply and a custom rolling carrying case for effortless setup and transport.Rigid polyethylene pedal board which can accommodate up to 10 stomp boxesErgo friendly arched shape2 larger surfaces for wah and volume type pedals9v daisy chain power supplyHook & loop angled surface for pedal mountingHeavy-duty padded lightweight carry case with wheels and tow handle
|

|
Gator G-Bus-8-Us Pedal Board Power Supply
$94.99
The G-Bus-8-US Pedal Board Power Supply is a one-unit solution for powering and protecting all your effect pedals. It gives you 8 - 9V outputs, and 3 - 18V outputs, provides short circuit protection, and is housed in a roadworthy heavy-duty aluminum casing that mounts easily to most pedalboards. Includes 9 - 24" patch cables.Multi-output power supply for guitar effects pedalsShort circuit protection with resetHeavy-duty aluminum housing4 mounting holes for mounting to Gator Pedal Totes, Gig Box Series, or any other pedalboard8 - 9V outputs and 3 - 18V outputs1700 milliamp power output9 - 24" cables for each output to power pedalsUL-Approved Power SupplyIsolated Brass chambers for modeling screws
|
*************************************************************
If you didn"t find what you wanted look below for Pedal Board in the Amazon Marketplace.
*************************************************************
 |
Casio SP32 Pedal Board for CS67 Stand
List Price: $99.95
Sale Price: Too low to display
|
|
|
A Piano Style, Three Pedal Attachment for Your CS67 Privia Stand! The SP32 pedal adds those extra piano dynamics you want for your Privia Digital Piano. The 3 three pedal system adds an extended damper function in that it simulates a pedal that has been pressed down half way.
|
 |
M-Audio SP-2 US65010 Sustain Pedal Piano Style Sustain Pedal for Keyboards
List Price: $29.99
Sale Price: Too low to display
Used From: $224.99
|
|
|
M-Audio SP-2 Sustain Pedal--Play as Passionately as You Want The M-Audio SP-2 Sustain Pedal is the perfect product for keyboard players who want the most realistic pedal action. The SP-2 model is used in the same manner as the sustain pedal on an acoustic piano...
|
 |
Power-Grip Pedalboard Velcro Alternative Pedal Mounting Tape
List Price: $14.95
Sale Price: $11.95
|
|
|
Keep your guitar pedals on your pedalboard where they belong! Power-Grip is hands down the best pedalboard Velcro alternative! Simple, yet ingenious, Power-Grip pedal board tape mates to itself via rows of tiny mushroom-shaped posts that form a much stronger bond than traditional "hook & loop" Velcro fasteners...
|
What are some suggestions for the setup of my bass pedal board?
Any ideas? I have:
-Dunlop Crybaby Wah
-Boss Tuner
-Electro-Harmonix Metaphors
-Electro-Harmonix Big Muff Pi
-Boss Phase Shifter
-Boss Bass Synthesizer
-Boss Super Shifter
-Boss Noise Suppressor
-Line 6 Echo Park Delay
Thanks!
Pretty much how you have it listed. Generally the signal chain will go as follows:
Wah/Envelope Filter
Overdrive/Distortion
Compressor
Noise Suppressor
Phaser/Flanger/Chorus
Reverb/Delay
I would probably put the tuner in front of the wah, the Suppressor after the Big Muff, and the Delay last. I'm not sure what the Metaphors or the Synthesizer does, so I would experiment with those to see where they sound best. Hope this helps!
Guitar Stand
Check out this page if you are looking for Guitar Stand

|
On-Stage Stands Tubular Guitar Stand
$14.99
This popular guitar stand combines On-Stage Stand's special velveteen rubber and thick, strong tubing. Features include a removable lower stepped yoke and a security strap on the upper.Single guitar stand Velveteen rubber padding Heavy-duty sheet metal leg housing 19mm/25mm tubing Black powder coat finish
|

|
K&M Memphis Travel Guitar Stand
$24.99
This compact, ultra-lightweight Memphis travel guitar stand from K&M is made from high-grade aluminum tubing. The instrument stand's support arms adjust to fit various guitar sizes, making this guitar stand suitable for both electric and acoustic instruments, as well as for ukuleles. K&M lines the support arms with an exclusive non-marring plastic to protect your guitar's finish. Two feet fold out at the front to ensure additional stability. 5-year warranty.
|

|
Fender Electric Guitar Folding Stand
$14.99
This mini guitar stand for electric guitars folds to fit in most gig bags or cases and holds most standard-shaped guitars (non-offset). Velveteen rubber protects your guitar's finish. Deluxe black satin finish.
|

|
Fender Acoustic Guitar Folding Stand
$18.99
This mini guitar stand for acoustic guitars folds to fit in most gig bags or cases and holds most standard-shaped guitars. Velveteen rubber protects your guitar's finish. Deluxe black satin finish.
|

|
Hamilton Grabbit Guitar Stand Black
$29.99
The traditional cradle-type Hamilton Grabbit Guitar Stand holds guitars in place securely with its patent-pending Grabbit claw at the top. This unique mechanism uses the guitarist's own pressure to operate the lock, making it easy, secure, and "cool." When you press the neck of their guitar into the claw, it automatically depresses a button that reacts by closing the clamp around the guitar neck. The Grabbit stand works on every guitar, including more cumbersome hollowbody guitars. It's safe, reliable, affordable, and includes excellent features for its price range.
|

|
K&M Guitar Mount for Mic Stand
$29.99
With this guitar holder design you no longer need a separate guitar standhang your axe on your microphone stand. The mountable guitar holder comes in two parts: the upper clamp and the lower elastic ring. The upper clamp fixes onto the extension tube of the microphone stand using a clamping screw. The rubber-covered support arms hold the guitar safely and securely. The upper clamp can be folded away for easy transport while the holder only needs to be mounted once. The lower elastic ring attaches to the main tube of the microphone stand using a Velcro® closure and serves as a bearing point while also protecting the guitar from damage. The whole mounted guitar holder is lightweightless than half a pound.
|

|
Hennessey Hang-It Progrip Guitar Stand
$29.95
The On-Stage Stands GS8100 guitar stand has padded gates that close when the guitar head rests on the upper yokes. Height adjusts from 30-43" so that the body rests on legs back bumpers.This patent-pending stand includes padded gates that close when the guitar headstock rests on the upper yokes. The weight of the guitar keeps the gates closed, preventing it from falling even if the stand is vigorously bumped on stage.The GS8100 is height-adjustable to accommodate the size of any guitar, ensuring that the body gently rests against its padded legs. Features include velveteen rubber padding, reinforced tripod leg braces, non-slip rubber end caps, and a cam locking clutch.Applications: Single Guitar StandPadding: Velveteen RubberLeg Housing: Steel and reinforced nylon leg housing and clutchesTubing: 17mm/25mmColor: Black Powder Coat FinishHeight Adj.: 30"-43" via cam-locking clutchWeight Capacity: 36 lbs
|

|
K&M Guitar Mount For Mic Stand
$29.99
With this guitar holder design you no longer need a separate guitar standhang your axe on your microphone stand. The mountable guitar holder comes in two parts: the upper clamp and the lower elastic ring. The upper clamp fixes onto the extension tube of the microphone stand using a clamping screw. The rubber-covered support arms hold the guitar safely and securely. The upper clamp can be folded away for easy transport while the holder only needs to be mounted once. The lower elastic ring attaches to the main tube of the microphone stand using a Velcro closure and serves as a bearing point while also protecting the guitar from damage. The whole mounted guitar holder is lightweightless than half a pound.
|
*************************************************************
If you didn"t find what you wanted look below for Guitar Stand in the Amazon Marketplace.
*************************************************************
 |
String Swing Hardwood Home & Studio Guitar Hanger (Shades May Vary)
List Price: $14.25
Sale Price: $6.49
|
|
|
The String Swing Guitar Hanger features exclusive tubing that will not mark the finish on your instrument - Guaranteed! Its hardwood construction looks fantastic and is built to last. The yoke pivots to hold any type of headstock and is is adjustable to any width...
|
 |
Fender Mini Acoustic Guitar Stand
List Price: $24.99
Sale Price: $9.99
|
|
|
Extremely lightweight, compact and portable, the Fender Mini Guitar Stand is a "must have". It folds up really small so that you can carry it in your guitar case, gig bag or tuck it in the back of your amp, but when you open it up it will securely and stably hold your guitar or bass with rock solid performance! With two models to cater to thinline howllow body and solid body electric guitars and basses, or larger hollow body and acoustic instruments the Fender Mini Stand has your back covered...
|
 |
Musician's Gear Tubular Guitar Stand Black
List Price: $24.99
Sale Price: $9.95
Used From: $15.00
|
|
|
Made to exacting specs with soft black neoprene rubber tubing to protect your guitar. Folds up for easy transport. Not for nitrocellulose-finish guitars.
|
 |
Guardian Electric Guitar Stand (A-Shape, Black)
List Price: $14.39
Sale Price: $10.99
Used From: $9.89
|
|
|
This guitar stand is designed to fit both electric and acoustic guitars. You don’t need to be an ironman to use this stand, because it is made to easily open and close.
|
 |
Ultra 2445BK Guitar Stand (Black)
List Price: $27.95
Sale Price: $9.49
|
|
|
Whether you own an Electric Guitar, an Acoustic Guitar, or a Bass Guitar, the Ultra 2445BK Guitar Stand will fit your needs! It features rubber tubing on the neck and bucket to protect your instrument, and the legs and neck support fold for compact storage...
|
 |
OnStage 7121B Heavy Duty Guitar Stand
List Price: $24.00
Sale Price: $15.75
Used From: $13.00
|
|
|
Prevent needless damage to your guitar or bass and keep it within reach by using one of these heavy duty guitar stands. Constructed of all metal, these black tubular stands are sturdy enough for any guitar or bass...
|
 |
Fender Mini Electric Guitar Stand
List Price: $24.99
Sale Price: $7.99
|
|
|
Extremely lightweight, compact and portable, the Fender Mini Guitar Stand is a "must have". It folds up really small so that you can carry it in your guitar case, gig bag or tuck it in the back of your amp, but when you open it up it will securely and stably hold your guitar or bass with rock solid performance! With two models to cater to thinline howllow body and solid body electric guitars and basses, or larger hollow body and acoustic instruments the Fender Mini Stand has your back covered...
|
 |
Planet Waves Guitar Rest
List Price: $12.99
Sale Price: $1.95
|
|
|
The Planet Waves Guitar Rest turns any flat surface into a guitar stand. Simply lay the Guitar rest over the edge of any level surface and lean your instrument against the "neck pocket” of the guitar rest...
|
*************************************************************
Guitar stand for explorer shaped guitars?
Hi,
does anyone know of any website which will sell a guitar stand for explorer shaped guitars which wouldn't result in hanging the guitar from the neck?
Thanks
I've yet to see one like that
Hanging a guitar from the neck isn't dangerous at all nor will it mess up the guitar in any way.
Your only danger is wall hangers, and thats if you don't mount them properly...
September 30th, 2010
admin
Case Surface Mount
Check out this page if you are looking for Case Surface Mount

|
Shure Mx400smp Microflex Surface Mount Preamp
$109.99
The MX400SMP Surface mount preamp is designed for use with MX405 and MX410 Microflex Miniature Gooseneck Microphones. The MX400SMP will mount a microphone to a table or other surface through a drilled 1" hole. This accessory can be a direct replacement or as an additional mount in facilities that have more than one meeting location and need an expanded sound system.Logic enabled for LED control 5 pin XLR connector included Low-cut filter CommShield Technology for improved Radio Frequency filtering
|

|
Odyssey Carpeted Cd Case 450/150
$109.99
Classic carpeted CD case holds 150 jewel cases or 450 view pack CDs. Foam interior, rugged surface mount hardware, and corner braces.
|

|
Odyssey Carpeted CD Case 450/150
$109.99
Classic carpeted CD case holds 150 jewel cases or 450 view pack CDs. Foam interior, rugged surface mount hardware, and corner braces.
|

|
Odyssey Carpeted Cd Case 300/100
$79.99
Odyssey's carpeted CD case holds 100 jewel case CDs or 300 view-pack CDs, keeping them safe and portable.Carpeted Odyssey CD case with surface-mount hardwareHolds 100 jewel-case CDs or 300 view-pack CDsDimensions: 24-1/2"W x 7"H x 13"DWeight: Approximately 13 lbs.
|

|
Crown Pcc170 Surface Mount Supercardioid Boundary Mic
$299
The CROWN PCC-170 is a surface-mounted supercardioid microphone of professional quality. This handsomely styled unit is appropriate for use on the most elegant boardroom table or lectern. Other applications include churches, courtrooms and council chambers. Because of its highly directional pickup pattern, the CROWN PCC-170 minimizes background noise and feedback. The microphone reproduces the voice with a clean, clear and natural sound. Since the microphone capsule is placed on a boundary or surface, direct and reflected sounds arrive at the diaphragm in-phase. This coherent addition of direct and reflected waves increase sensitivity 6 dB and prevents phase cancellations. The mic capsule is small enough to ensure phase coherency up to the highest frequencies in the audible spectrum, resulting in a wide, smooth frequency response free of phase interference. Clarity and reach are also enhanced. Self-noise is low and sensitivity is very high and an RFI suppression is included. A bass-tilt switch allows the user to tailor the low-end response for particular applications.Self-contained electronics eliminate the need for an in-line preamp. Powered by 12-48V phantom power, the PCC-170 has a low-impedance mic level balanced output which permits long cable runs without hum pickup or high-frequency loss. Supercardioid polar pattern offers high-gain-before-feedback Phase coherent cardioid design prevents coloration from surface sound reflections Wide and smooth frequency response Three-position bass-tilt switch Small and inconspicuousApplications:SecurityLecternHouses of worshipDistance learningConferencing
|

|
Crown Pcc170swo Surface Mount Supercardioid Boundary Mic
$369
The Crown PCC-170SWO is a handsomely styled surface mounted supercardioid microphone that is appropriate for use on the most elegant boardroom table or lectern. Other applications include churches, courtrooms and council chambers. Because of its highly directional pickup pattern, the PCC-170SWO minimizes background noise and feedback. The microphone reproduces the voice with a clean, clear and natural sound. Since the microphone capsule is placed on a boundary or surface, direct and reflected sounds arrive at the diaphragm in-phase. This coherent addition of direct and reflected waves increases sensitivity 6 dB and prevents phase cancellations. The mic capsule is small enough to ensure phase coherency up to the highest frequencies in the audible spectrum, resulting in a wide, smooth frequency response free of phase interference. Clarity and reach are also enhanced. The PCC-170SWO offers a silent-operating membrane switch that is normally off. The switch can be configured for touch on/off, momentary on or momentary off. This configuration is set by a bottom-mounted DIP switch. A high-intensity LED lights when the unit is on. The microphones attenuate 70 dB when the switch is in the off position. Self-contained electronics eliminate the need for an in-line preamp. Powered by 12-48V phantom power, the PCC-170SW has a low-impedance mic level balanced output which permits long cable runs without hum pickup or high-frequency loss. A pair of extra leads in the mic cable allows the CROWN PCC-170SWO isolated remote sensing of the microphone switch closure. In a typical distance-learning application, a video camera would track to the person who switched on the microphone. Remote sensing is done by a patented opto-coupled MOS switching circuit. At the remote-sensing leads, the resistance goes low when the mic is on. The microphones attenuate 70 dB when the switch is in the off position. Supercardioid polar pattern reduces muddy-sounding room acoustics and background noise CROWN PCC technologie (phase coherent cardioid) for clear and natural sound Programmable, silent operating on/off membrane switch Extra leads in mic cable allow remote sensing of mic switch closure Small and inconspicuous Applications: Security Lectern Houses of worship Distance learning Conferencing
|

|
Crown Pcc170sw Surface Mount Supercardioid Boundary Mic
$319
The Crown PCC-170SW is a handsomely styled surface mounted supercardioid microphone that is appropriate for use on the most elegant boardroom table or lectern. Other applications include churches, courtrooms and council chambers. Because of its highly directional pickup pattern, the PCC-170SW minimizes background noise and feedback. The microphone reproduces the voice with a clean, clear and natural sound. Since the microphone capsule is placed on a boundary or surface, direct and reflected sounds arrive at the diaphragm in-phase. This coherent addition of direct and reflected waves increases sensitivity 6 dB and prevents phase cancellations. The mic capsule is small enough to ensure phase coherency up to the highest frequencies in the audible spectrum, resulting in a wide, smooth frequency response free of phase interference. Clarity and reach are also enhanced. The PCC-170SW offers a silent-operating membrane switch that is normally off. The switch can be configured for touch on/off, momentary on or momentary off. This configuration is set by a bottom-mounted DIP switch. A high-intensity LED lights when the unit is on. The microphones attenuate 70 dB when the switch is in the off position. Self-contained electronics eliminate the need for an in-line preamp. Powered by 12-48V phantom power, the PCC-170SW has a low-impedance mic level balanced output which permits long cable runs without hum pickup or high-frequency loss. Supercardioid polar pattern reduces muddy-sounding room acoustics and background noiseCROWN PCC technologie (phase coherent cardioid) for clear and natural soundProgrammable, silent operating on/off membrane switchSmall and inconspicuousApplications:SecurityLecternHouses of worshipDistance learningConferencing
|

|
Coffin Case Coffin-Shaped Guitar Wall Hanger
$9.99
Hang your acoustic or electric on a Coffin Case-Shaped Guitar Wall Hanger and rest assured it's in a good place. The Coffin Case wall hanger is made of plastic with simulated wood grain, and a padded rubber steel yoke that'll keep your guitar's finish flawless. A double screw mount keeps your axe secure. Attaches to nearly any surface and pivots to hold most headstock shapes so you can hang any guitar anywhere.Plastic with simulated wood grainPadded rubber steel yokeDouble screw mount
|

|
Odyssey CXE804 Carpeted Econo Combo Case
$169.99
The top of the Odyssey CXE804 Econo combo case has 8 slanted rack spaces. The bottom has 4 vertical rack spaces for your other DJ equipment. Surface mount hardware. Dimensions: 21"W x 16"H x 20"D. Approx. 35 lbs.
|

|
Odyssey Cxe804 Carpeted Econo Combo Case
$169.99
The top of the Odyssey CXE804 Econo combo case has 8 slanted rack spaces. The bottom has 4 vertical rack spaces for your other DJ equipment. Surface mount hardware. Dimensions: 21"W x 16"H x 20"D. Approx. 35 lbs.
|

|
Pearl 75H Hoop-Mount Cowbell Holder With Non Marring Clamp Surface
$19.99
The hoop-mount Pearl 75H cowbell holder's parallel action jaws provide superior clamping power. The holder's upper plate is contoured for a secure fit. The clamping surfaces are rubber-lined to prevent slippage and to protect your drum hoop from nicks or scrapes.
|

|
Used Crown Pcc170 Surface Mount Supercardioid Boundary Mic
$272.09
The CROWN PCC-170 is a surface-mounted supercardioid microphone of professional quality. This handsomely styled unit is appropriate for use on the most elegant boardroom table or lectern. Other applications include churches, courtrooms and council chambers. Because of its highly directional pickup pattern, the CROWN PCC-170 minimizes background noise and feedback. The microphone reproduces the voice with a clean, clear and natural sound. Since the microphone capsule is placed on a boundary or surface, direct and reflected sounds arrive at the diaphragm in-phase. This coherent addition of direct and reflected waves increase sensitivity 6 dB and prevents phase cancellations. The mic capsule is small enough to ensure phase coherency up to the highest frequencies in the audible spectrum, resulting in a wide, smooth frequency response free of phase interference. Clarity and reach are also enhanced. Self-noise is low and sensitivity is very high and an RFI suppression is included. A bass-tilt switch allows the user to tailor the low-end response for particular applications.Self-contained electronics eliminate the need for an in-line preamp. Powered by 12-48V phantom power, the PCC-170 has a low-impedance mic level balanced output which permits long cable runs without hum pickup or high-frequency loss. Supercardioid polar pattern offers high-gain-before-feedback Phase coherent cardioid design prevents coloration from surface sound reflections Wide and smooth frequency response Three-position bass-tilt switch Small and inconspicuousApplications:SecurityLecternHouses of worshipDistance learningConferencing
|

|
Odyssey Carpeted Combo Mixer Rack Case 6 Space
$149.99
The CXC906 from the CXC Combo Series features a flush-mount slanted top section unique to Odyssey cases. The removable front and back entry panels are interchangeable. The rack mixer case has heavy duty handles and surface mount latches. 9 spaces on top, 4 vertical spaces below. Detachable lid and front cover included (not shown).
|

|
Odyssey Carpeted Combo Mixer Rack Case 4 Space
$129.99
The CXC906 from the CXC Combo Series features a flush-mount slanted top section unique to Odyssey cases. The removable front and back entry panels are interchangeable. The rack mixer case has heavy duty handles and surface mount latches. 9 spaces on top, 4 vertical spaces below. Detachable lid and front cover included (not shown).
|

|
Odyssey Carpeted Combo Mixer Rack Case 6 Space 886830171789
$127.49
The CXC906 from the CXC Combo Series features a flush-mount slanted top section unique to Odyssey cases. The removable front and back entry panels are interchangeable. The rack mixer case has heavy duty handles and surface mount latches. 9 spaces on top, 4 vertical spaces below. Detachable lid and front cover included (not shown).
|
*************************************************************
If you didn"t find what you wanted look below for Case Surface Mount in the Amazon Marketplace.
*************************************************************
 |
Odyssey CTTE Carpeted Econo Turntable Case With Surface Mount Hardware
List Price: $99.99
Sale Price: $61.00
|
|
|
Odyssey's CTTE Econo carpeted turntable case is the original case used from the beginning of mobile DJ'ing. It's still one of the best ways to transport your turntables. Features a fully foam lined interior, surface-mount hardware, and removable lid...
|
 |
Pyramid 4071WP 400 Watts 5-Inch 2Way Indoor/Outdoor Waterproof Speaker System (Pair)
List Price: $144.99
Sale Price: $31.34
|
|
|
White Color Marine Box Speakers5-Inch Poly Long Throw Woofer 200 Watts RMS/400 Watts Peak 4-8 Ohm Speaker Impedance 1-Inch High Compliance Mylar Tweeter Vented Design for High Power and Low Bass Heavy Duty ABS Construction w/Rubber Edge Quick Release Speaker Connection Frequency Response: 50Hz-20kHz Dimensions: 9...
|
*************************************************************
Help with Surface Mount Devices(Electronic Engineers only)?
Ok please tell me im going nuts how do i check an SMD transistor and diode. In the case of the diode when i reverse bias through ohmmeter its showing some resistance
this has no relation with surface mount component
Ohm's meters reading varies on make and model
in the circuit there are some components other than the junction (diode and/or transistor)
the meter measures resistance by applying a voltage and measures the current or a current and measures the voltage.
this depends on the scale chosen
the fancier meters have a scale specifically to measure diode junctions
the normal scale voltage is very low and measures the resistance below the diode conduction voltage (typically 100 mV)
some Ohm meters (for insulation) measure with high voltages, 500V and sometimes 5000V
it is important to properly chose the instrument for the application
Guru
Amp Case
Check out this page if you are looking for Amp Case
*************************************************************
For More choices check out Amp Case some of our other merchants.
*************************************************************

|
Skb Skb-710 Amp Case
$364.99
With the SKB-710 Amp Case, your amp is held in place on a rugged rolling Velcro-covered board with patented adjustable corner cleats and a secure reverse-cinch belt. When in use, the amplifier sits securely atop the cover at a height that allows better sound projection. Made of rotationally molded polyethylene for road ready strength and durability. The amplifier case has 3" locking wheels. SKB is a premier supplier of instrument and gear cases. They build their products with military-spec, ultrahigh molecular weight polyethylene and premium hardware. All SKB hardshell cases are unconditionally guaranteed forever. That means if you break the SKB-710 case, they will repair or replace it at no cost to you. Rugged rolling Velcro-covered board Patented adjustable corner cleats and a secure reverse-cinch belt hold amp in place Protects amp during transport When in use, amp sits securely atop the cover Made of rotationally molded polyethylene 3" locking wheels
|

|
Used Skb Skb-710 Amp Case 886830013300
$291.99
With the SKB-710 Amp Case, your amp is held in place on a rugged rolling Velcro-covered board with patented adjustable corner cleats and a secure reverse-cinch belt. When in use, the amplifier sits securely atop the cover at a height that allows better sound projection. Made of rotationally molded polyethylene for road ready strength and durability. The amplifier case has 3" locking wheels. SKB is a premier supplier of instrument and gear cases. They build their products with military-spec, ultrahigh molecular weight polyethylene and premium hardware. All SKB hardshell cases are unconditionally guaranteed forever. That means if you break the SKB-710 case, they will repair or replace it at no cost to you. Rugged rolling Velcro-covered board Patented adjustable corner cleats and a secure reverse-cinch belt hold amp in place Protects amp during transport When in use, amp sits securely atop the cover Made of rotationally molded polyethylene 3" locking wheels
|

|
Genz-Benz Shuttle Series Amp Head Carrying Case Black
$49
The Genz-Benz Shuttle Series Amp Head Carrying Case is a zippered soft case with front pocket and strap. The case fits both the Genz-Benz Shuttle 3.0 and Shuttle 6.0 amp heads for protection and easy transportation.
|

|
Music Nomad Amp & Case Cleaner & Conditioner
$8.49
The Music Nomad Amp & Case Cleaner & Conditioner comes from a company that's passionate about helping independent musicians. Just buy a new or used amp? Looking to restore your old amp to a like-new shine? Clean, condition, preserve & shine your amp or case with this special formula. It works great on all leather, vinyl & rubber amps, cases, drum chairs & electronic rubber pads and delivers a long lasting dry to touch new shine finish. Music Nomad's proprietary formula embeds itself safely in fibers of leather, vinyl & rubber creating a moisture resistant barrier. It does not attract dust because it is non greasy. They've even added UV protectants. This product contains no harsh chemicals and is 100% non abrasive.
|

|
Marshall Jvm410 Amp Head Flight Case Black
$319.99
This Marshall Flight Case for JVM410 Head is equipped with 4 heavy-duty rubber feet. The hardware is high quality Penn-Elcom MOL with the Marshall brand logo engraved on handles and latches. The case's interior is fitted specially for the Marshall amp head. As a top-loading case, the amplifier can be operated on the base.9mm laminated plywood with Marshall logo Superior quality Penn Elcom MOL hardware with Marshall engraved on handles and latches Interior is custom fitted for Marshall products for ultimate protection Top loading cases allow the head to be operated while sitting in base Includes heavy-duty rubber feet
|

|
Gator Roto Mold Amp Case For 2X12 Amps Green
$154.99
This two-piece Roto Mold Amp Case from Gator features a virtually indestructible design that fits most popular 2x12 amps with an opening on top for access to the amp handle. Two wraparound straps with clips secure the lid while you're carrying it (adjustable height from 16" to 21"), though the case also features 3" casters for even easier transport. The sturdy case can also double as an amp stand during performance and practice.Amp case fits most 2x12 amps Indestructible roto mold design Amp sits securely on top of case during use Open top design provides access to handle for easy transport Two wraparound straps with clips secure lid to base during transport Frame height expands 16" to 21" Heavy-duty 3" casters Made in the USA
|

|
Gator Roto Mold Amp Case For 2X12 Amps Red Granite
$154.99
This two-piece Roto Mold Amp Case from Gator features a virtually indestructible design that fits most popular 2x12 amps with an opening on top for access to the amp handle. Two wraparound straps with clips secure the lid while you're carrying it (adjustable height from 16" to 21"), though the case also features 3" casters for even easier transport. The sturdy case can also double as an amp stand during performance and practice.Amp case fits most 2x12 amps Indestructible roto mold design Amp sits securely on top of case during use Open top design provides access to handle for easy transport Two wraparound straps with clips secure lid to base during transport Frame height expands 16" to 21" Heavy-duty 3" casters Made in the USA
|

|
Gator Roto Mold Amp Case For 1X12 Amps Black
$109.99
The ingenious, 2-piece Roto Mold Amp Case from Gator features a virtually indestructible design that fits most popular 1x12 amps with an opening on top that provides access to the amp handle for easy transport. 2 wraparound straps with clips secure the lid while you're carrying it (adjustable height from 16" to 21"), though the case also features 3" casters so you can save your back when moving it from vehicle to the stage. The sturdy case can also double as an amp stand during performance and practice.Amp case fits most 1x12 amps Indestructible roto mold design Amp sits securely on top of case during use Open top design provides access to handle for easy transport 2 wraparound straps with clips secure lid to base during transport Frame height expands 16" to 21" Heavy-duty 3" casters Made in the USA
|

|
Gator Roto Mold Amp Case For 2X12 Amps Red
$154.99
This two-piece Roto Mold Amp Case from Gator features a virtually indestructible design that fits most popular 2x12 amps with an opening on top for access to the amp handle. Two wraparound straps with clips secure the lid while you're carrying it (adjustable height from 16" to 21"), though the case also features 3" casters for even easier transport. The sturdy case can also double as an amp stand during performance and practice.Amp case fits most 2x12 amps Indestructible roto mold design Amp sits securely on top of case during use Open top design provides access to handle for easy transport Two wraparound straps with clips secure lid to base during transport Frame height expands 16" to 21" Heavy-duty 3" casters Made in the USA
|

|
Gator Roto Mold Amp Case For 1X12 Amps Purple Granite
$134.99
The ingenious, 2-piece Roto Mold Amp Case from Gator features a virtually indestructible design that fits most popular 1x12 amps with an opening on top that provides access to the amp handle for easy transport. 2 wraparound straps with clips secure the lid while you're carrying it (adjustable height from 16" to 21"), though the case also features 3" casters so you can save your back when moving it from vehicle to the stage. The sturdy case can also double as an amp stand during performance and practice.Amp case fits most 1x12 amps Indestructible roto mold design Amp sits securely on top of case during use Open top design provides access to handle for easy transport 2 wraparound straps with clips secure lid to base during transport Frame height expands 16" to 21" Heavy-duty 3" casters Made in the USA
|

|
Gator Roto Mold Amp Case For 2X12 Amps Purple Granite
$154.99
This two-piece Roto Mold Amp Case from Gator features a virtually indestructible design that fits most popular 2x12 amps with an opening on top for access to the amp handle. Two wraparound straps with clips secure the lid while you're carrying it (adjustable height from 16" to 21"), though the case also features 3" casters for even easier transport. The sturdy case can also double as an amp stand during performance and practice.Amp case fits most 2x12 amps Indestructible roto mold design Amp sits securely on top of case during use Open top design provides access to handle for easy transport Two wraparound straps with clips secure lid to base during transport Frame height expands 16" to 21" Heavy-duty 3" casters Made in the USA
|

|
Gator Roto Mold Amp Case For 1X12 Amps Red Granite
$134.99
The ingenious, 2-piece Roto Mold Amp Case from Gator features a virtually indestructible design that fits most popular 1x12 amps with an opening on top that provides access to the amp handle for easy transport. 2 wraparound straps with clips secure the lid while you're carrying it (adjustable height from 16" to 21"), though the case also features 3" casters so you can save your back when moving it from vehicle to the stage. The sturdy case can also double as an amp stand during performance and practice.Amp case fits most 1x12 amps Indestructible roto mold design Amp sits securely on top of case during use Open top design provides access to handle for easy transport 2 wraparound straps with clips secure lid to base during transport Frame height expands 16" to 21" Heavy-duty 3" casters Made in the USA
|

|
Gator Roto Mold Amp Case For 2X12 Amps Blue
$154.99
This two-piece Roto Mold Amp Case from Gator features a virtually indestructible design that fits most popular 2x12 amps with an opening on top for access to the amp handle. Two wraparound straps with clips secure the lid while you're carrying it (adjustable height from 16" to 21"), though the case also features 3" casters for even easier transport. The sturdy case can also double as an amp stand during performance and practice.Amp case fits most 2x12 amps Indestructible roto mold design Amp sits securely on top of case during use Open top design provides access to handle for easy transport Two wraparound straps with clips secure lid to base during transport Frame height expands 16" to 21" Heavy-duty 3" casters Made in the USA
|

|
Gator Roto Mold Amp Case For 1X12 Amps Orange
$134.99
The ingenious, 2-piece Roto Mold Amp Case from Gator features a virtually indestructible design that fits most popular 1x12 amps with an opening on top that provides access to the amp handle for easy transport. 2 wraparound straps with clips secure the lid while you're carrying it (adjustable height from 16" to 21"), though the case also features 3" casters so you can save your back when moving it from vehicle to the stage. The sturdy case can also double as an amp stand during performance and practice.Amp case fits most 1x12 amps Indestructible roto mold design Amp sits securely on top of case during use Open top design provides access to handle for easy transport 2 wraparound straps with clips secure lid to base during transport Frame height expands 16" to 21" Heavy-duty 3" casters Made in the USA
|
*************************************************************
If you didn"t find what you wanted look below for Amp Case in the Amazon Marketplace.
*************************************************************
 |
Full Size Electric Guitar with Amp, Case and Accessories Pack Beginner Starter Package Vintage Sunburst
List Price: $249.95
Sale Price: $79.97
|
|
|
This classic style guitar package from Tyger includes everything you need start playing right out of the box. The full size 39" guitar features a rosewood fretboard and maple neck. The amp has both clean and distortion settings and a gig bag case, guitar strap, cable, pics, and pitch pipe are all included -- so you will need nothing else when you get your new guitar package from us...
|
What type of amp should I get for my new bass guitar?
I just bought a cheap bass, and I’m looking for a practice amp. Can I use a regular guitar amp (in case I decide to switch to electric guitar) or should I defiantly get a bass amp?
Concerning the unsure outcome of playing bass or guitar: You can play guitar through a bass amp, but not bass through a guitar amp. It's a one way street. So get the bass amp.
Since I don't know how interested you are in bass, getting a cheap small amp could give you a horrible sound and be a complete turnoff. Get something decent. You don't have to spend top dollar, but go to a local shop, a Guitar Center if you have one around, and try things out. You'll run across something you like. If you think it's too expensive, get the name and model and look it up online. Win/win
X