Mounts in speaker so it can be placed on most tripod speaker stands. 1-1/2" diameter.Fits Mackie SRM450s and SRM350s, JBL EONs, Yamaha MSR series speakers, and many more
Transport and protect up to two standard speaker tripod stands from scratches and dents. Large zipper opening allows easy product removal and input.Case size: 6" x 43" x 6" (152 x 1092 x 152mm) Transport two speaker tripod stands Protect up to 2 standard speaker tripod stands from scratches and dents Large zipper opening to easily take product out or put away
The Fender ST-275 Tripod Speaker Stand includes 2 heavy-duty tripod stands constructed of anodized aluminum alloy tubing plus a convenient nylon carrying bag. Stands fold down for storage and transport. Designed for use with Fender Passport speakers or any speaker with a polemount adapter. Each stand supports up to 60 lbs.Constructed of anodized aluminum alloy tubing Fold down to fit into nylon carrying bag (included) Designed for use with Passport speakers or any speaker with polemount adapter Each stand supports up to 60 lbs.
The TeleLock speaker stands from Ultimate Support are extraordinarily strong yet lightweight due to their oversized, heavy-wall aluminum tubing. They're everything you'd expect from an Ultimate Support speaker stand: they're strong, sturdy, lightweight, 100% field serviceable, and easy to set up and take down. Moreover, thanks to auto-locking technology that securely grips the telescoping tube in place as you set its height, the TeleLock collar gives the user the ability to safely raise or lower the speaker stand while a speaker is on it.Patented TeleLock collar:The Ultimate TS-90 speaker stand is one of the easiest speaker stands to use thanks to its patented TeleLock collar. Set the TeleLock collar to either the "raise" or "lower" setting and the auto-locking technology provides just the right amount of resistance to allow you to raise or lower the speaker while locking the tube in place.Patented tripod design:The Ultimate Support TS-90's offset, tripod base design provides more support than typical "off-the-shelf" speaker stands. The design makes for very tight internal fittings, doing away with unnecessary sloppy leg problems, and includes a super-strong, die-cast metal collar that prevents over tightening and breakage issues often associated with plastic designs.Oversized, heavy-wall aluminum tubing:The entire speaker stand (legs, mast, and telescoping tube) uses oversized, heavy-walled aluminum tubing for durability, functionality, and weight savings. The Ultimate Support TS-90 speaker stand will not rust or corrode (thanks to its architectural, anodized finish), is very smooth to operate, and is extraordinarily strong yet lightweight.100% field-serviceable parts:From the foot caps on the bottom of the tripod legs all the way up to the speaker adapter at the top of the stand, the TS-90 speaker stand is field-serviceable as needed by the part over its very long lifespan. In the unlikely event that something does break on the Ultimate Support TS-90, instead of throwing the entire stand away and buying a whole new one, simply replace the broken part with the appropriate, affordable part to retain the value of your Ultimate TS-90 speaker stand.Patented TeleLock collarPatented tripod designOversized, heavy-wall aluminum tubing100% field-serviceable partsManufacturer's limited lifetime warrantyIncluded, integrated speaker socket adapter accommodates 1-3/8" and 1-1/2" socketsAdjustable height: 3' 8" to 6' 7"Weight: 7.3 lb.Base diameter: 47"Telescoping tube diameter: 1.5"Adapter diameter: 1.375"Load capacity: 150 lb.Folded dimensions: 43.5" x 5.5"Manufacturer's part number: 13908
The TeleLock Series speaker stands from Ultimate Support are extraordinarily strong yet lightweight due to their oversized, heavy-wall aluminum tubing. They're everything you'd expect from an Ultimate Support speaker stand: they're strong, sturdy, lightweight, 100% field serviceable, and easy to set up and take down. Moreover, thanks to auto-locking technology that securely grips the telescoping tube in place as you set its height, the TeleLock collar gives the user the ability to safely raise or lower the speaker stand while a speaker is on it.Patented TeleLock collar:The Ultimate Support TS-90 is one of the easiest speaker stands to use thanks to its patented TeleLock collar. Set the TeleLock collar to either the "raise" or "lower" setting and the auto-locking technology provides just the right amount of resistance to allow you to raise or lower the speaker while locking the tube in place.Patented tripod design:The TS-90 speaker stand's offset, tripod base design provides more support than typical "off-the-shelf" speaker stands. The design makes for very tight internal fittings, doing away with unnecessary sloppy leg problems, and includes a super-strong, die-cast metal collar that prevents over tightening and breakage issues often associated with plastic designs.Oversized, heavy-wall aluminum tubing:The entire speaker stand (legs, mast, and telescoping tube) uses oversized, heavy-walled aluminum tubing for durability, functionality, and weight savings. The Ultimate Support TS-90 will not rust or corrode (thanks to its architectural, anodized finish), is very smooth to operate, and is extraordinarily strong yet lightweight.100% field-serviceable parts:From the foot caps on the bottom of the tripod legs all the way up to the speaker adapter at the top of the stand, the TS-90 speaker stand is field-serviceable as needed by the part over its very long lifespan. In the unlikely event that something does break on the speaker stand, instead of throwing the entire stand away and buying a whole new one, simply replace the broken part with the appropriate, affordable part to retain the value of your Ultimate Support TS-90.Patented TeleLock collarPatented tripod designOversized, heavy-wall aluminum tubing100% field-serviceable partsManufacturer's limited lifetime warrantyIncluded, integrated speaker socket adapter accommodates 1-3/8" and 1-1/2" socketsAdjustable height: 3' 8" to 6' 7"Weight: 7.3 lb.Base diameter: 47"Telescoping tube diameter: 1.5"Adapter diameter: 1.375"Load capacity: 150 lb.Folded dimensions: 43.5" x 5.5"Manufacturer's part number: 13908
Heavy-duty, pro quality. Reversible shaft can be used with 1-3/8" or 1-1/2" inserts. Folding tripod base. Adjusts from 44" - 80". Supports 120 lbs.Reversible upper shaft makes for a universal fitLocking/Retractable leg housing with 120 design for low center of gravity and equal weight distributionTension height adjustment knob and safety pin for added safety
Speaker stands need to be both sturdy and easy to move. JamStands Speaker Stands fit on both accounts, giving you a stable environment in which to elevate your speakers to optimum height. Crafted from aluminum and powder-coated for finish durability, these stands will give you years of service. Each stand can hold up to 110 lbs. and includes both a 1-1/2" and 1-3/8" adaptors to accommodate different types of speakers. The strong telescoping and leg collars provide a stable stand for your speakers. The height adjustment collar has a safety pin for extra security.Long-lasting aluminum construction Durable powder-coated finishTripod base is very stable and sturdyStand is height-adjustableHolds up to 110 lbs.3-year warrantyHeight 42.9" - 70.9"
The Yamaha ADP138 allows mounting of the STAGEPAS 300 speaker system to standard 1-3/8" (35mm) tripod stands or poles. Mounting screws are already installed in the speaker systems for this purpose. You can also use the speaker mounting hardware for the MSR100 speaker.
The SounTech S75 is a tripod speaker stand that holds up to 150 pounds. Silver with black hardware. Adjusts from 44" - 79". Comes with 5 year SoundTech Built Tough Warranty!
The SounTech S75 is a tripod speaker stand that holds up to 150 pounds. Silver with black hardware. Adjusts from 44" - 79". Comes with 5 year SoundTech Built Tough Warranty!
The Pyle PMDK-102 Pro Audio Speaker Stand and Cable Kit includes professional quality components that match virtually all speaker finishes. It includes two telescoping speaker stands that each have a 100-pound load capacity...
Odyssey's LATSA1 is used as a mounting platform for speakers, followspots, and moving head fixtures. This mounting adapter easily slides down on top of most tripod stands. Included are 4 wood screws. 1-3/8" diameter adapter...
The TS-70B is a high-quality quality and economical speaker stand from Ultimate Support. Its Socket Adapter accommodates both 1-3/8'(35mm) and 1-1/2'(38mm) speaker sockets. The TS-70B also features a safe telescoping collar with a safety pin for maximum strength and security...
An extremely versatile speaker stand, this reversible-shaft design may be used with either 1 3/8" or 1 1/2" speaker cabinet mounts. Includes the added safety of a locking shaft pin to prevent accidental speaker slippage...
On Stage SSP7950 Tripod Speaker Stand Package with BagThe SSP7950 tripod speaker stands are On Stage’s top selling stands, and now come in a convenient package including the top selling bag that holds two stands! These stands are all aluminum, and feature a reversible 1 3/8 or 1 1/2 inch upper shaft, with 8 preset height adjustment holes and locking pin for added security...
Long-lasting aluminum construction. Durable powder-coated finish. Tripod base is very stable and sturdy. Stand is height-adjustable. Holds up to 110 lbs.. Adjustable height: 42.9" - 70.9"
Pair of PA Tripod Speaker Stands Model # SpeakerStandLG (Pair) Brand New Heavy Duty Tripod Speaker Stand Stands up to 72" tall Holds up to 200 lbs Fits 1.5" Speakers Comes with an adapter to fit 1 3/8" Speakers 1...
i want to shoot music videos and i am trying to get a bigger idea of it.
i think i have everything that takes to make one.
i got experience with video because i shoot weddings and parties
i use Final Cut Pro for editing
i have an imac and a macbook pro 2011
i have hard drives
all cables
speakers
tripods etc
lights
great ideas
know most of the rules (i am planning to go to school in case i am missing something, i've learned over time)
i am young i am only 19 years old and i've been doing this since i was 16 or so because of my dad
i am really confident with my self on my video level but i want to know what else can i do to make it better?
i want to deliver good results to my client
here is a link to a video i made (edited and recorded by me)
i am currently going to collage to be a commercial photographer, i also want to study video but i don't want it to be my whole career...
thank you!!
Seems like the only thing thats holding you back is the ability to set up scenes and props that you want. Besides that, you should learn to use films and affects in final cut to make it look even more proffesional.
You're on your way!
One of the greatest things about Little Mark amps is that they're LITTLE! But if you want to protect them well, putting them in a standard road case defeats the purpose of their small size. So now here's a small hard case for Little Mark amps that keeps your amp safe and keeps it little.
The Pedaltrain PT-3 Pedalboard with Hard Case and Wheels has an all new design with more space underneath. Bigger than the PT-2 and smaller that the PT-PRO, it's a great choice for using with a true bypass loop switcher. Built to last, the PT-3 is a professional solution for keeping your pedals accessible on stage and protected en route. A flight case with wheels, large storage compartment, and lockable latches is included.Durable welded aluminum alloy tubing Open frame design for simplified cable management Comes with industrial-grade adhesive fastener Accommodates various power supplies Includes heavy-duty hard case with wheels
The On-Stage Stands Hard Shell Classical Guitar Case is sized to fit a Classical guitar and most Spanish-style guitars. Constructed from quality materials this case is perfect for protecting and transporting your guitar. The interior is custom molded and provides full neck support. Interior also features a soft plush lining and accessories compartment, perfect for picks and capos.
This hardshell case combines all the necessary elements for a high-quality, reliable case that provides excellent protection for your instrument. It is made with 5-ply cross-laminate woods that can stand up to a great deal of pressure...
This lightweight Cello cases is well-constructed, with burgundy plush velvet interior. Heavy duty black exterior. It has two bow holders, compartment for rosin & accessories, and a large zippered pocket on the back exterior for sheet music & accessories...
Designed to fit most traditional electric guitars such as Fenders, Jacksons, Charvels, Washburns, Ibanez, etc. This molded case has a heavy-duty valence and the interior is designed to grip the guitar for maximum protection...
Gator Cases GC Deluxe Series Guitar Cases are molded cases made from the finest ABS plastic with an ultra-strong extruded Aluminum valance. The interior is formed with dense EPS foam giving ultimate support and then covered in plush to completely pamper your instrument...
Gator Cases GC Deluxe Series Guitar Cases are molded cases made from the finest ABS plastic with an ultra-strong extruded Aluminum valance. The interior is formed with dense EPS foam giving ultimate support and then covered in plush to completely pamper your instrument...
This SKB case has been designed to fit Les Paul type instruments. The specially molded interior grips the guitar to provide the protection required by today's active musician who plays many different venues with various transportation requirements...
Does anyone know how to open a Hitachi 500GB external hard drive case?
I found the screws on the back behind the stickers but I don't want to damage the case too much. And if it is possible to open it, what kind of connections hook up the hard drive? Any insight would be greatly appreciated.
take it to a professional because it sounds like you do not know what you are doing and you are only going to make a problem a bigger problem and end up having to buy a new computer
Humes and Berg Vulcanized Fibre Gong Cases Vulcanized Fibre Humes & Berg Econoline Vulcanized Fibre Tom Cases Vulcanized Fibre Vulcanized Fibre was developed many years ago to make salesman sample cases. Humes and Berg used it to make drum cases that quickly became the industry standard. Humes and Berg has been manufacturing these custom built cases for over 60 years. Vulcanized Fiber is the flagship of the fiber case line. Their reputation for quality and durability is accepted throughout the world. They are tough and withstand active use.
Humes and Berg Vulcanized Fibre Gong Cases Vulcanized Fibre Humes & Berg Econoline Vulcanized Fibre Tom Cases Vulcanized Fibre Vulcanized Fibre was developed many years ago to make salesman sample cases. Humes and Berg used it to make drum cases that quickly became the industry standard. Humes and Berg has been manufacturing these custom built cases for over 60 years. Vulcanized Fiber is the flagship of the fiber case line. Their reputation for quality and durability is accepted throughout the world. They are tough and withstand active use.
Humes and Berg Vulcanized Fibre Gong Cases Vulcanized Fibre Humes & Berg Econoline Vulcanized Fibre Tom Cases Vulcanized Fibre Vulcanized Fibre was developed many years ago to make salesman sample cases. Humes and Berg used it to make drum cases that quickly became the industry standard. Humes and Berg has been manufacturing these custom built cases for over 60 years. Vulcanized Fiber is the flagship of the fiber case line. Their reputation for quality and durability is accepted throughout the world. They are tough and withstand active use.
These cases feature a 1.5 inch mahogany plywood case covered in durable ampfet covering to hold up to the rigors of frequent travel plus heavy-duty recessed handles and casters on all models for easy transport. The interior features a plush lined 1 inch floating foam interior designed to secure the instrument and dampen all shock to the case. The cases are a universal fit-all design that accommodates 90% of all instruments; custom designs are also available to meet specific needs.
These cases feature a 1.5 inch mahogany plywood case covered in durable ampfet covering to hold up to the rigors of frequent travel plus heavy-duty recessed handles and casters on all models for easy transport. The interior features a plush lined 1 inch floating foam interior designed to secure the instrument and dampen all shock to the case. The cases are a universal fit-all design that accommodates 90% of all instruments; custom designs are also available to meet specific needs.
These cases feature a 1.5 inch mahogany plywood case covered in durable ampfet covering to hold up to the rigors of frequent travel plus heavy-duty recessed handles and casters on all models for easy transport. The interior features a plush lined 1 inch floating foam interior designed to secure the instrument and dampen all shock to the case. The cases are a universal fit-all design that accommodates 90% of all instruments; custom designs are also available to meet specific needs.
These cases feature a 1.5 inch mahogany plywood case covered in durable ampfet covering to hold up to the rigors of frequent travel plus heavy-duty recessed handles and casters on all models for easy transport. The interior features a plush lined 1 inch floating foam interior designed to secure the instrument and dampen all shock to the case. The cases are a universal fit-all design that accommodates 90% of all instruments; custom designs are also available to meet specific needs.
In transit, carrying two guitars can get awkward, yet having that second guitar on stage or in the studio is a real necessity for some players. Mono Cases provides elegant solution to make it easier for you to transport your guitarss while ensuring each has the same protection given by their rugged M80 hybrid case. After a year of prototyping, the Z-form design was perfected (patents pending). The end result is an incredibly lightweight, extremely sturdy double-hybrid electric guitar case.The zigzag design of the Mono M80 multi-guitar case creates a completely separate case for each guitar. That means both headstocks are protected with the neckbrace and strap pin bumpers. It also means the Mono M80 case can be used with 1 or 2 guitarssomething you'll appreciate on the road. Additionally, the Z-form design allows for immediate access to either guitar. Grab one from the left side or the other from the right side.Mono Cases' innovative neckbrace design provides a level of protection worthy of the finest instruments. Your guitar quickly straps in and remains stabilized during transport. The headstock is suspended inside the case, saving the guitar from impacts that could otherwise snap the neck.Mono Cases builds their cases to military specs, using only high-test materials with extreme resistance to abrasion and the elements. Inside, the plush lining protects delicate custom finishes so your guitar rides first class while you launch an urban assault.With this Mono dual guitar case, everything is in its place. Specialized storage compartments put your gear right where you need it. Deep gussets make sure your small items stay put, and the hidden upper pocket keeps your wallet, keys, and cell phone concealed.The Mono M80 fits 2 standard body electric guitars including Fender Tele/Strat, Gibson, Les Paul, Ibanez, ESP.This product is covered under Mono Cases' 3-year limited liability warranty.Dimensions: 41-1/2" H x 11-1/2" W (upper bout), 14-1/2" (lower bout) x 2" DWeight: just over 7 pounds
In transit, carrying two guitars can get awkward, yet having that second guitar on stage or in the studio is a real necessity for some players. Mono Cases provides elegant solution to make it easier for you to transport your guitarss while ensuring each has the same protection given by their rugged M80 hybrid case. After a year of prototyping, the Z-form design was perfected (patents pending). The end result is an incredibly lightweight, extremely sturdy double-hybrid electric guitar case.The zigzag design of the Mono M80 multi-guitar case creates a completely separate case for each guitar. That means both headstocks are protected with the neckbrace and strap pin bumpers. It also means the Mono M80 case can be used with 1 or 2 guitarssomething you'll appreciate on the road. Additionally, the Z-form design allows for immediate access to either guitar. Grab one from the left side or the other from the right side.Mono Cases' innovative neckbrace design provides a level of protection worthy of the finest instruments. Your guitar quickly straps in and remains stabilized during transport. The headstock is suspended inside the case, saving the guitar from impacts that could otherwise snap the neck.Mono Cases builds their cases to military specs, using only high-test materials with extreme resistance to abrasion and the elements. Inside, the plush lining protects delicate custom finishes so your guitar rides first class while you launch an urban assault.With this Mono dual guitar case, everything is in its place. Specialized storage compartments put your gear right where you need it. Deep gussets make sure your small items stay put, and the hidden upper pocket keeps your wallet, keys, and cell phone concealed.The Mono M80 fits 2 standard body electric guitars including Fender Tele/Strat, Gibson, Les Paul, Ibanez, ESP.This product is covered under Mono Cases' 3-year limited liability warranty.Dimensions: 41-1/2" H x 11-1/2" W (upper bout), 14-1/2" (lower bout) x 2" DWeight: just over 7 pounds
In transit, carrying 2 bass guitars can get awkward yet having that second bass guitar on stage or in the studio is often necessary. Mono Cases set out to design an elegant solution to this problem. Their driving criterion was to ensure each bass had the same protection as their single M80 hybrid case. After a year of prototyping, the Z-form design was perfected (patents pending). The end result is an incredibly lightweight, extremely rugged double hybrid guitar case.The zigzag design on the Mono M80 multi-bass case creates a completely separate compartment for each bass. That means both headstocks are protected with the neckbrace feature and strap pin bumpers. It also means the M80 Dual can be used with 1 or 2 bass guitarssomething you'll appreciate on the road. Additionally, the Z-form design allows for immediate access to either bass. Grab one from the left side or the other from the right side.Mono Cases' innovative neckbrace design provides a level of protection worthy of the finest instruments. Your bass guitar quickly straps in and remains stabilized during transport. The headstock is suspended inside the case, saving the guitar from impacts that could otherwise snap the neck.Mono Cases builds their bass cases to military specs, using only high-test materials with extreme resistance to abrasion and the elements. Inside, the plush lining protects delicate custom finishes so your bass rides first class while you launch an urban assault.With this electric bass case, everything is in its place. Specialized storage compartments put your gear right where you need it. Deep gussets make sure your small items stay put, and the hidden upper pocket keeps your wallet, keys, and cell phone concealed.The Mono M80 bass case fits 2 standard body electric guitars including Fender Tele/Strat, Gibson, Les Paul, Ibanez, and ESP.This product is covered under Mono Cases' 3-year limited liability warranty.Dimensions: 48" H x 12-1/2" W (upper bout), 14-1/2" (lower bout) x 2" DWeight: 8 lb.
In transit, carrying 2 bass guitars can get awkward yet having that second bass guitar on stage or in the studio is often necessary. Mono Cases set out to design an elegant solution to this problem. Their driving criterion was to ensure each bass had the same protection as their single M80 hybrid case. After a year of prototyping, the Z-form design was perfected (patents pending). The end result is an incredibly lightweight, extremely rugged double hybrid guitar case.The zigzag design on the Mono M80 multi-bass case creates a completely separate compartment for each bass. That means both headstocks are protected with the neckbrace feature and strap pin bumpers. It also means the M80 Dual can be used with 1 or 2 bass guitarssomething you'll appreciate on the road. Additionally, the Z-form design allows for immediate access to either bass. Grab one from the left side or the other from the right side.Mono Cases' innovative neckbrace design provides a level of protection worthy of the finest instruments. Your bass guitar quickly straps in and remains stabilized during transport. The headstock is suspended inside the case, saving the guitar from impacts that could otherwise snap the neck.Mono Cases builds their bass cases to military specs, using only high-test materials with extreme resistance to abrasion and the elements. Inside, the plush lining protects delicate custom finishes so your bass rides first class while you launch an urban assault.With this electric bass case, everything is in its place. Specialized storage compartments put your gear right where you need it. Deep gussets make sure your small items stay put, and the hidden upper pocket keeps your wallet, keys, and cell phone concealed.The Mono M80 bass case fits 2 standard body electric guitars including Fender Tele/Strat, Gibson, Les Paul, Ibanez, and ESP.This product is covered under Mono Cases' 3-year limited liability warranty.Dimensions: 48" H x 12-1/2" W (upper bout), 14-1/2" (lower bout) x 2" DWeight: 8 lb.
These cases feature a 1.5 inch mahogany plywood case covered in durable ampfet covering to hold up to the rigors of frequent travel plus heavy-duty recessed handles and casters on all models for easy transport. The interior features a plush lined 1 inch floating foam interior designed to secure the instrument and dampen all shock to the case. The cases are a universal fit-all design that accommodates 90% of all instruments; custom designs are also available to meet specific needs.
These cases feature a 1.5 inch mahogany plywood case covered in durable ampfet covering to hold up to the rigors of frequent travel plus heavy-duty recessed handles and casters on all models for easy transport. The interior features a plush lined 1 inch floating foam interior designed to secure the instrument and dampen all shock to the case. The cases are a universal fit-all design that accommodates 90% of all instruments; custom designs are also available to meet specific needs.
SKB 3I Series Cases are Strong, Tough and Waterproof, You'll want to have one anywhere you go! 3I Series Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasketed, water and dust tight, submersible design that is resistant to corrosion and impact damage...
This black, Tolex Epiphone Les Paul Hardshell Case is just what you need to protect your Les Paul guitar from the rigors of the road. The plush-lined, hardshell case serves as a shock absorber with an inner compartment to hold extra strings, straps, picks, slides, etc.
SKB 3I Series Cases are Strong, Tough and Waterproof, You'll want to have one anywhere you go! 3I Series Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasketed, water and dust tight, submersible design that is resistant to corrosion and impact damage...
This hardshell LP guitar case from the Gibson Custom Shop keeps your treasured Les Paul safe and snug with a plush interior and a handy accessory compartment. Don't settle for less. Protect your valuable axe with a custom case.
SKB 3I Series Cases are Strong, Tough and Waterproof, You'll want to have one anywhere you go! 3I Series Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasketed, water and dust tight, submersible design that is resistant to corrosion and impact damage...
The is a custom designed harmonica pouch by The Instrument Store. After being unsatisfied with other zippered harmonica pouches being too large for standard 10 hole blues harps, we designed our own pouch which will perfectly fit all standard 10 hole diatonic, blues harps and marine band type harmonicas...
This SKB case has been designed to fit Les Paul type instruments. The specially molded interior grips the guitar to provide the protection required by today's active musician who plays many different venues with various transportation requirements...
SKB 3I Series Cases are Strong, Tough and Waterproof, You'll want to have one anywhere you go! 3I Series Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasketed, water and dust tight, submersible design that is resistant to corrosion and impact damage...
Building custom carrying case, where to find padding?
I have a little audio mixing board and various accessories that I am going to build a carrying case for out of wood. It's more a woodworking hobbyist type project but I do plan to use it. I want to line the inside with some protective padding to keep it from moving around during transport. Maybe some mini egg crate foam. I've found some stuff around the web but it seems to be commercial/industrial targeted and in quantities I could never use. Any ideas on where I might be able walk in and buy such a thing? I'm drawing a blank.
try a craft store like Michaels or Joannes. you could always use the egg crate for pillows or twin beds
The Blessing C-300 Wood Marching Baritone Case features a plush interior with a wood shell construction exterior. The Blessing C-300 Wood Marching Baritone Case is the factory case included with all Blessing BM-300 Series Marching Baritones.
The Blessing C-ML1 Deluxe Wood Trumpet Case features a wood shell construction with a plush interior and accessory storage plus a grey exterior and two case handles--one side and one on the end of the case. The Blessing C-ML1 Case is the factory case supplied with all Blessing BTR-ML1 Series Trumpets.
The Blessing C-ML1 Deluxe Wood Trumpet Case features a wood shell construction with a plush interior and accessory storage plus a grey exterior and two case handles--one side and one on the end of the case. The Blessing C-ML1 Case is the factory case supplied with all Blessing BTR-ML1 Series Trumpets.
The Blessing C-161 Wood Cornet Case features a wood shell construction with a plush interior that is designed to hold a long model Bb cornet without a Shepherds crook.
The Blessing C-100 Wood Marching Mellophone Case features a wood shell construction with a plush interior to prevent scratching of the instrument. The Blessing C-100 Wood Marching Mellophone Case is the factory case included with all Blessing BM-100 Series Marching Mellophones.
The Blessing C-151 Wood Short Cornet Case features a wood shell construction with a plush interior and accessory storage area. The Blessing C-151 Wood Short Cornet Case is the same factory case included with all Blessing BCR-XL Series Short Model Bb Cornets with Shepherds Crook.
The Blessing C-88 Deluxe Wood Trombone Case features a plush interior with a wood shell exterior construction. The C-88 Case also features a gray exterior finish with two handles-one on the side of the case and one on the end of the case. The Blessing C-88 Deluxe Wood Trombone Case is the factory case included with all Blessing BTB-78, BTB-8 and BTB-88 Series Trombones.
Manufactured by expert German craftsmen, this gorgeous mahogany metronome is extremely accurate and steady. It has classic metronome styling in a mahogany wood case with a bell.
The Blessing C-154 Deluxe Wood Combination Flugelhorn / Trumpet Case features a plush interior and gray exterior with a wood shell construction. The C-154 Case features space for one flugelhorn and one trumpet. The Blessing C-154 Deluxe Wood Combination Fluegelhorn / Trumpet Case is the same factory case included with all Blessing BFH-1540T Series Flugelhorns.
The JW 472 Wood Flugelhorn Case is characterized by the highest quality in workmanship and materials. This sturdy case is stylishly covered in black leatherette and has a plush blue velvet interior. The wood frame is protected with metal corners and a bumper edge. A large accessory tray holds all your accessories.
High quality, polished wooden case. Traditional windup power supply with visual pendulum movement and audible ticking sound. Adjustable from 40 to 208 beats per minute. German craftsmanship.
Golden Gate also offers a full line of contemporary designed hardshell instrument cases. Each Premier model case offers the highest level of protection one expects from a quality wood hardshell, arched-top case, but at a price that lets you focus on the instrument you plan on putting inside.
From the heavy-duty arched top to the crushed velvet interior, these hardshell cases are vintage in every detail. The cases feature a black tolex covering with a strong arched top, a plush velvet interior, six locking mechanisms, an accessory compartment and more...
Mendini violin is perfect for the beginner or student violinist. It features hand-carved solid spruce top, hand-carved maple back and sides finished with beautiful colored varnishes. This violin is fitted with rosewood (painted black) fingerboard, pegs, chin rest, and alloy tailpiece with 4 built-in fine tuners...
Mendini violin is perfect for the beginner or student violinist. It features hand-carved solid spruce top, hand-carved maple back and sides finished with beautiful colored varnishes. This violin is fitted with rosewood (painted black) fingerboard, pegs, chin rest, and alloy tailpiece with 4 built-in fine tuners...
This MCT-40 intermediate clarinet is made of premium quality ebony wood. Ebony wood is a heavy, dark wood that presents their characteristic color and offer players the ability to produce the warmest and sustained sound...
This violin is perfect for the student musician. It features hand carved solid maple back and sides, hand-carved solid spruce top, beautiful inlaid purfling, varnish finish, natural colored rosewood pegs, chin rest, tailpiece and rosewood fingerboard...
How to paint a white book case to match wood?
I have a white bookcase that I love and that is in good shape but everything in my house is wood, how could I make it fit into a room or paint it to match everything else?
You have 2 options and they both have been addressed. The best looking but most tedious would be to sand it down to wood and bring it back up with a matching stain and make it pop with a coat of poly. Sanding can be a lot of work, plus you need the right tools and knowledge. I.e you'll need rough grit to bring it down ~80 grit and then hit it with a 220 grit to smooth it out with a powersander. If there are detailed edges or crevices you'll need to hand sand it with sponge paper (lots of work!) This is only if it is hardwood and not hong kong crap. The easier option would be to find a wood color paint(plenty of options) at your local home store and just paint it.
If done right the first option will look like a brand new piece of expensive furniture if you have the time
Whether you're on the road or at the gig, Gator's EVA foam wireless microphone case is a dual functional protective case for most common-sized half-rack wireless units. On the road it has a rigid, 5mm EVA rubber foam design and can hold the wireless receiver, a microphone, power supply, beltpack transmitter, and lapel microphones. When you're at your gig, there's no need to take your receiver out of the case as it has zippered access to the front, back, and top to allow you to plug in, make adjustments, and even give your antennas room to do their job.Slim, rigid 5mm EVA rubber foam designHolds most common-sized half-rack wireless unitsFront and rear access unzips for easy setup in the fieldZipper access to allow antenna to be in place and functional while in bagStorage for receiver, handheld microphone, power supply, belt pack transmitter, and lapel microphonesNylon handle
This hardshell Gator microphone case is made with rugged, molded military-grade polyethylene plastic lined with thick die-cut foam to accommodates 6 mics. Triple chromeplated latches are lockable.Military-grade polyethylene plastic Die-cut foam lining Accommodates six microphones Triple chromplated locking latches
Designed for a single wireless system, the Gator GM-1WP case features a rugged, stackable polyethylene construction and enables the antenna to be extended while in the case. It provides space for Lavaliers, body pack, cables, and the wireless mic with transporter mounted. Front and rear access enables easy setup in the field. The tray height is adjustable.Rugged, stackable polyethylene construction Designed for single wireless system to be used in the case Includes space for body pack and microphone Access for antenna to be extended while in the case Space for Lavaliers, cables & wireless mic with transporter mounted Front & rear access for easy setup in the field Adjustable tray height
This injection-molded SKB microphone case holds sixteen mics, stored vertically in a compact, waterproof case. The SKB mic case is constructed of ultra high-strength polypropylene, copolymer resin and features a gasketed, waterproof and airtight, submersible design (IP67) that is resistant to corrosion and impact damage. Its continuous molded-in hinge; patented "trigger release" latch system; comfortable, snap-down rubber, over-molded cushion-grip handle; secure stacking; and automatic ambient pressure equalization valve (MIL-STD-648C) all contribute to this SKB mic case's military-grade design. The interior foam is cut on the new water jet machine SKB now uses to cut custom foam and design new products. The SKB case has convoluted foam in the lid for a compression fit. This microphone case holds up to 16 mics securely with two-step mic holes designed to secure any type of microphone. In addition, the 3I-2011-MC16 case includes a generous, padded storage compartment for cables and mic clips. The SKB mic case measures 20" x 11" x 8".Ultra high-strength polypropylene, copolymer resin UV, solvent, corrosion, and fungus-resistant (MIL-STD-810F) Complete gasket seal makes these cases absolutely watertight (MIL-STD-C-4150J) Automatic ambient pressure equalization value (MIL-STD-648C & IP67) Resistant to corrosion and impact damage Continuous molded-in hinge Patent pending "trigger release" latch system Rubber, over-molded cushion-grip handle Custom-cut foam to hold 16 microphones Manufacturer's model number: 3I-2011-MC16 Covered by SKB's "Million Mile" lifetime guaranty
This Injection-Molded SKB microphone case holds six mics in a very compact case and is part of SKB's 3I Waterproof Series of cases. 3I Series, injection-molded, waterproof cases are constructed of ultra high-strength polypropylene, copolymer resin and feature a gasketed, waterproof and airtight, submersible design (IP67) that is resistant to corrosion and impact damage. Its continuous molded-in hinge; patented "trigger release" latch system; comfortable, snap-down rubber, over-molded cushion-grip handle; secure stacking; and automatic ambient pressure equalization valve (MIL-STD-648C) all contribute to its military-grade design. The interior foam of this microphone case is cut on the new water jet machine SKB now uses to cut custom foam and design new products. The mic case has convoluted foam in the lid for a compression fit. This case allows for three mics to be stored horizontally on two separate layers of foam. The 3I-0907-MC6 microphone case measures 9" x 7" x 6" and is one of the most compact, 6-mic cases on the market.Ultra high-strength polypropylene, copolymer resin UV, solvent, corrosion, and fungus-resistant (MIL-STD-810F) Complete gasket seal makes these cases absolutely watertight (MIL-STD-C-4150J) Automatic ambient pressure equalization value (MIL-STD-648C & IP67) Resistant to corrosion and impact damage Continuous molded-in hinge Patent pending "trigger release" latch system Rubber, over-molded cushion-grip handle Custom-cut foam to hold six microphones Manufacturer's model number: 3I-0907-MC6 Covered by SKB's "Million Mile" lifetime guaranty
This Injection-Molded Microphone Case is SKB's largest mic case and vertically stores up to 24 mics. It's extra-deep to accommodate longer, condenser mics. The SKB mic case includes a large, padded accessory compartment for storage of cables, mic clips, or other mic essentials and it's part of SKB's 3I Waterproof Series. This waterproof mic case is constructed of ultra high-strength polypropylene, copolymer resin and features a gasketed, waterproof and airtight, submersible design (IP67) that is resistant to corrosion and impact damage. Its continuous molded-in hinge; patented "trigger release" latch system; comfortable, snap-down rubber, over-molded cushion-grip handle; secure stacking; and automatic ambient pressure equalization valve (MIL-STD-648C) all contribute to the SKB mic case's military-grade design.The interior foam of the mic case is cut on the new water jet machine SKB now uses to cut custom foam and design new products. The case has convoluted foam in the lid for a compression fit. It also features an injection-molded pull handle along with in-line skate wheels. The 3I-2015-MC24 microphone case measures 20" x 15" x 10".Ultra high-strength polypropylene, copolymer resinUV, solvent, corrosion, and fungus-resistant (MIL-STD-810F)Complete gasket seal makes these cases absolutely watertight (MIL-STD-C-4150J)Automatic ambient pressure equalization value (MIL-STD-648C & IP67)Resistant to corrosion and impact damageContinuous molded-in hingePatent pending "trigger release" latch systemRubber, over-molded cushion-grip handleCustom-cut foam to hold twenty-four microphonesIn-line skate wheelsManufacturer's model number: 3I-2015-MC24Covered by SKB's "Million Mile" lifetime guaranty
With detailed information in the midrange area and a soft silky response in the top end, the Cactus Tube Microphone from Blue details and mellows the program material. The Cactus Microphone's amplifier design is based on a single vacuum tube sub-miniature. Multipattern. 20Hz - 20kHz frequency range. Blue includes a power supply, ATA flight case, series one shockmount/pop filter, and Kiwi cord with your Cactus Tube Microphone.Requires phantom power.
The Gator G-Tour M15 ATA Microphone Case has a 9-ply marine-grade plywood shell and with 1mil polyethylene exterior construction. The extruded aluminum valance is tongue and grooved for total roadworthiness. This mic flight case also features triple-plated, chromed heavy-duty hardware, red Penn Elcom recessed MOL twist latches, and spring-loaded rubber-gripped handles. Holds 15 microphones in padded individual microphone drop compartments. The case also provides plenty of space for accessories, cables, wireless transmitters, batteries, and clips.15 foam-padded microphone dropsLarge space for accessoriesRecessed latches and handlesPlywood constructionSolid propylene exteriorTongue and groove extrusion aluminum valanceHeavy-duty chromeplated hardwareReinforced corners for ultimate protectionRed Penn Elcom recessed MOL twist latches and spring-loaded rubber-gripped handles
For serious field recording, the CS-15R cardioid-type stereo microphone is a great match for the Roland CD-2e SD/CD recorder. For portability and convenience, the CD-2e supplies the power to the mic. Bundled with the microphone are a desktop stand, a hand-held mount, and a windscreen.Element: Electret CondenserOpen Circuit Sensitivity: -41.5 4 dB (0 dB=1 V/ 1 Pa, 1 kHz)Polar Pattern: Uni Directional x 2Impedance: 1,300 ohmsFrequency Response: 200 to 17,000 HzMaximum Input S.P.L119dB SPL (3% THD at 1kHz)Battery: LR44 type, 1.5VButtery Current: 0.6mABattery Life: 200 Hours (continuous use)Cable Length: 3 m/10 feetPlug: 1/4 inch Phone PlugAccessories: Owner's Manual, Wind Screen, Carrying Case, Microphone Stand, Microphone Holder, Screw Adaptor, LR44 Battery
The Model 522 is a dynamic base station microphone designed especially for radio communications, paging, and dispatching systems. Its cardioid (unidirectional) pickup pattern suppresses unwanted background noise -- the type of noise generated by other dispatchers working nearby, by ventilating equipment, or by office machines in the same area. The mic also eliminates or reduces feedback in public address paging applications.Dual impedance(19 to 300 ohms or High) lmpedance change switch for convenient change-over Finger-tip control bar (locking or non-locking action) to actuate microphone circuit and an external relay or control circuit Long-life switch to satisfy rigorous requirements of communications and paging systems Sturdy, high impact ARMO-DUR base and microphone case Adjustable microphone height Dependability -- under all operating conditions Conversion kit available for Monitor/Transmit switching
The Behringer B-5 Condenser Microphone features interchangeable cardioid and omnidirectional capsules and a gold-sputtered diaphragm. It is perfect for acoustic instruments, vocals, and overhead miking. Its ultralow-noise, transformerless FET input eliminates low-frequency distortion. The -10dB attenuator can be used with high-volume signal sources, while the low-cut filter eliminates floor rumble. Behringer delivers the B-5 Condenser Microphone in a rugged hard case with stand adapter and windscreen.Requires phantom power.Condenser typeInterchangeable capsules, for cardioid and omnidirectional patternsGold-sputtered diaphragmLow-noise transformerless FET input-10dB attenuatorLow-cut filterIncludes hard case, stand adapter, and windscreen
The Audio Technica AT-BG1 is a soft microphone bag that provides protection for your microphones. The case is durable, lightweight, and has a zippered opening.
The AMT VS Microphone System includes the AMT VS Clip-On condenser microphone and the AMT belt pack preamp. The VS is a ultra miniature, feather weight low profile condenser microphone specially designed for the violin, viola, and mandolin. The microphone attaches to the violin, viola, and mandolin with a clamp designed for be solid on the instrument without harming or dampening the natural sound or vibrations. The microphone provides pure tonal reproduction while being unobtrusive. The reproduction of natural sound of the instrument is the goal. Includes a hardshell Blo-mold protective case and " to XLR cable.The AMT VS can be used with most major brand wireless belt pack transmitters and receivers. With the AMT Interface, the microphone can plug directly into the interface which then plugs directly into most major brand wireless units. Requires phantom power.
The AMT VS Microphone System includes the AMT VS Clip-On condenser microphone and the AMT belt pack preamp. The VS is a ultra miniature, feather weight low profile condenser microphone specially designed for the violin, viola, and mandolin. The microphone attaches to the violin, viola, and mandolin with a clamp designed for be solid on the instrument without harming or dampening the natural sound or vibrations. The microphone provides pure tonal reproduction while being unobtrusive. The reproduction of natural sound of the instrument is the goal. Includes a hardshell Blo-mold protective case and " to XLR cable.The AMT VS can be used with most major brand wireless belt pack transmitters and receivers. With the AMT Interface, the microphone can plug directly into the interface which then plugs directly into most major brand wireless units. Requires phantom power.
The Shure 577B microphone is perfect for all types of mobile communications from amateur radio to helicopter news and traffic reports. Also suitable for public address and paging systems in noisy areas such as factories, airport terminals, and restaurants. The Shure 577B represents a significant improvement over most microphones with anti-noise features. Shaped frequency response, directionality, and distant sound discrimination contribute to total noise reduction. The microphone operates on the pressure-gradient principle and has 2 sound entry ports spaced a small distance apart. Modular design greatly facilitates field servicing. The cartridge, switch, and cable can be replaced in a matter of minutes. Built to withstand mechanical shocks, vibration, high temperatures, and humidity. The exclusive ARMO-DUR case is impervious to oil, grease, fumes, salt spray, sun, and corrosion. The "Million-Cycle" press-to-talk switch ensures years of reliable service. A mounting bracket is supplied to provide convenient hang-up when the microphone is not in use. Frequency response tailored for close-talk operation Extremely effective noise cancellation Dynamic microphone cartridge Modular design "Million-cycle" leaf-type press-to-talk switch TRIPLE-FLEX cable provides 3 to 4 times the flex life of most coiled cords Rugged ARMO-DUR case Built-in hang-up button and supplied mounting bracket
The Samson R21 Dynamic Vocal Microphone delivers pro-quality sound at a dollar-store price! The Samson R21 is a high quality, low impedance vocal/instrument mic with a warm, natural sound, a tight cardioid pattern for maximum gain before feedback, a dual stage heavy duty windscreen, a die-cast mic body, and gold plated XLR pins for reliable operation...
The Gator GM12B microphone bag holds 12 microphones and fetures an exterior pocket for cables and accessories. The GM12B is constructed of rugged 600-Denier nylon and provides a padded shoulder strap for easy transport...
The dual-diaphragm Samson CO3 has all the performance features that you demand from a large diaphragm studio condenser microphone. Capture your vocals with rich, warm bass and an extended top end. For instruments you will notice a detailed and transparent response throughout the frequency range with absolutely no harshness...
Gator offers a variety of microphone cases. The GM-4 model is a soft carrying case with 4 mic drops. There is also an exterior accessory pocket that is perfect for cables and mic clips. The GM-6 is an ABS molded plastic case with 6 mic spaces...
The Gator GM1W Wireless Mobile Pack was designed for single wireless unit to be transported and used in the case! The GM1W provides space for lavalieres, cables, and wireless mics, even with the transmitter attached...
The SKB 3I2011MC16 Injection Molded Case holds sixteen mics stored vertically and is part of the 3I Waterproof Series of cases. 3i Series injection molded waterproof cases are constructed of ultra high-strength polypropylene copolymer resin and feature a gasketed, waterproof and airtight, submersible design (IP67) that is resistant to corrosion and impact damage.
What are some good pink acccesories for the Dell Inspiron 1420 laptop?
I'm going to buy the Flamino Pink Dell Inspiron 1420 laptop. What are some good pink accesories for it? Such as a carrying case,mouse,and microphone for a webcam.
Please include a website! Thanks!
I also want a carrying case with a sling strap thing.
The strap sling thing that goes over yur shoulder. Thats what im talking about.
One of my friends just bought the same laptop recently, and a pink bag to go with it. I put a link to the site she found her bag with in the source box. Also, I've been doing a lot of laptop research lately to find my own, and one of the notebooks I was considering was the red version of yours. Dell actually has a lot of accessories to go with their new colorful line. I put a link to that page in the box as well. Hope I've helped!
US $40.00
![ROK SAK DELUXE KEYBOARD BAG for 88 KEY KEYBOARD 3019]](http://www.ponymouse.com/images/e/380407821088_0.jpg)
![NEW ACOUSTIC GUITAR HARD CASE DREADNAUGHT CASE 3134]](http://www.ponymouse.com/images/e/140695979310_0.jpg)
