Screws Racks Washers
Check out this page if you are looking for Screws Racks Washers
*************************************************************
For More choices check out Screws Racks Washers some of our other merchants.
*************************************************************
|
Valentino Valve Instrument Washers
$9.99
Synthetic Valentino washers for musical instruments with valves will not compress like felt. Includes an assortment of top cap, valve stem, and finger button washers to fit cornets or trumpets. Package of 24 assorted sizes to fit all makes.
|
|
Tama Nylon Washers 20 Pack
$2.4
Tama conveniently offers you this pack of 20 nylon washers for your tension rods. Always good practice to change the washers when you change the rods.
|
*************************************************************
If you didn"t find what you wanted look below for Screws Racks Washers in the Amazon Marketplace.
*************************************************************
1999 Ford Taurus cracked block??
ok this is going to be long. I bought this car cheap cause it needed a rack and pinion. Drove good for 3 months, but no heat.I went to replace the thermostat and noticed washers under one bolt and when putting it back together noticed the bolts were stripped. I took it imedietlly to a shop 2 miles from my house to be repaired.He tapped them out,no coils,and gave me the car back.It started running warm,i put water and saw a leak around the therm. housing.He looked at it said it was a bad gasket and gasve it back to me.My girl drove it,told me it was still running hot.Gave it back to him late on a friday, he coldnt fix it it was too late but said it was a warped housing.In need of the car i took it back went to repair it noticed a flat spot on the housing,replaced it then while checking all fluids before going on a trip noticed the milky oil, new it was screwed.He says its in no way his fault.The car was brought to him for bolts, but then for the LEAK which he never repaired.WHOSEFAULT
Driving any car that is overheating will cause the block to crack. Regardless of the origin of the overheating problem, it should never have been driven. Sorry, your fault.
Ata Effects Road
Check out this page if you are looking for Ata Effects Road
|
Road Runner ATA Style Utility Case Black Small
$94.99
Designed for all your uniquely shaped units like drum and rhythm machines, groove effects, samplers, effect boxes, compact projectors, CD players, small lasers, headphones and others, this case is built to accommodate all units up to 10.5" long, 9" wide, and 4" high. Features Road Runner's exclusive high-density Pick-&-Fit foam which allows you to create the perfect custom storage space for whatever you like. Simply shape the Pick-&-Fit Foam to create your perfect fit. If your needs change, your case doesn't have to; Pick-&-Fit Foam replacements are readily available.
|
|
Moog Taurus 3 ATA road case
$495
The Moog Taurus 3 ATA Road Case protects your Moog Taurus 3 Bass Pedal when you're out on the road. The Taurus 3 road case meets ATA specifications. This heavy-duty road case is custom fitted to the Moog Taurus 3 and has an internal dimension that is 25" wide X 24" deep X 8 1/2" high.
|
|
Gator Gator ATA LP Guitar Road Case
$269.99
The Gator G-Tour LP Guitar Flight Case is an ATA touring case made for LP-style guitars from 5mm marine-grade plywood; aluminum tongue and grooved corner extrusion with three red Penn Elcom recessed MOL twist latches; and spring-loaded, rubber-gripped handles. The plush interior cradles the Les Paul-style guitar snugly.
|
|
Gator G-TOUR-12U ATA 12-Space Rack Road Case
$389.99
The Gator G-Tour ATA Rack Road Case features front and rear 3.2mm-thick rack rails and a 17" rackable depth with the lid removed. Accomodates 12 rackspaces. 9mm plywood shell with a polypropylene exterior. The aluminum valance is double-thick and tongue and grooved for rugged touring duty to keep your rackmount music gear safe. Heavy-duty hardware includes recessed latches and handles. The ATA rack case also includes Red Penn Elcom recessed MOL twist latches and spring-loaded rubber-gripped handles.
|
|
Gator G-TOUR CD-9x12 ATA Road Case Black 9X12.5
$139.99
The Gator G-Tour CD Road Case is manufactured to Airline Transportation Authority (ATA) specifications and features 5mm plywood construction, heavy-duty zinc-plated hardware, spring-loaded heavy-duty handles and a tongue-and-groove aluminum extrusion.Two slide-access doors in front and rear allow use while the player is in the case. This case allows a secure fit with EVA foam-padded, carpeted covered interior and adhesive-backed EVA foam blocks for proper fit of various models, and convoluted foam in lid and breakaway hinges. The top can also be put on with cables extending out of the rear access to leave the player connected.The G-Tour CD 9" x 12" ATA Road Case fits Pioneer CDJ100 and CDJ200, Stanton S250, American Audio CDS1, Numark Access8 and Access 9, and Denon S1000 DJ CD players.
|
|
Gator G-TOUR CD-13x17 ATA Road Case Black 13X17
$179.99
The Gator G-Tour CD Road Case is manufactured to Airline Transportation Authority (ATA) specifications and features 5mm plywood construction, heavy-duty zinc-plated hardware, spring-loaded heavy-duty handles and a tongue-and-groove aluminum extrusion.Two slide-access doors in front and rear allow use while the player is in the case. This case allows a secure fit with EVA foam-padded, carpeted covered interior and adhesive-backed EVA foam blocks for proper fit of various models, and convoluted foam in lid and breakaway hinges. The top can also be put on with cables extending out of the rear access to leave the player connected.The G-Tour ATA Road Case fits Pioneer DVJ-1000, CDJ-1000, Numark Axis-4, Denon S3000, Technics DZ-1200 and other similar models.
|
|
Gator G-Tour 2U ATA Style Rack Road Case
$179.99
Gator's G-Tour 2U is a 2-space ATA rack case built to transport your rackmounted audio equipment in complete safety no matter if you're taking it on the road or on a flight. A PVC exterior is matched to a 9mm plywood construction and heavy-duty zinc plated hardware. It's safely stackable thanks to the reinforced ball corners. Thanks to the spring-loaded handles,it won't take any more space than necessary.
|
|
Road Runner Effects Pedalboard Silver Large
$99.99
The Road Runner pedal board is the safest and most convenient way to transport your valuable effects pedals to and from rehearsals and gigs. The base of these solid aluminum pedal cases are fully lined with Velcro while the lid is padded with thick nub foam. Road Runner includes self-adhesive Velcro tape for securely mounting your pedals. The pedalboard case features a nickel-plated steel spring handle, heavy duty hinges, and chrome plated butterfly locks.
|
|
Road Runner Slant Mixer Rack 16 Space
$449.99
This slant mixer rack from Road Runner features recessed handles, steel ball stackable corners, and high-quality casters. Meeting ATA standards, it will get your gear safely and securely from gig to gig, whether you're playing across town or on the other side of the world. A heavy embossed Tolex cover minimizes fingerprints and scratches. It's the perfect case for amps, mixers, effects, keyboards, and DJ gear.
|
|
SKB SKB-1717DJ CD-400 ATA Compact Disc Road Case
$154.99
This ATA CD case has a tough hardshell exterior, completely removable lid, molded bumpers for added protection, lockable latches and a gasket-sealed valence that keeps out dust and moisture. SKB is a premier supplier of instrument and music gear cases. SKB builds their utility cases with military-spec, ultrahigh molecular weight polyethylene and premium hardware. All SKB hardshell cases are unconditionally guaranteed forever. That means if you break the SKB-1717DJ ATA CD case, they will repair or replace it at no cost to you.
|
|
Road Runner ATA Style Utility Case Black Large
$129.99
Small ATA style equipment case with adjustable foam. Use it to protect your drum machine, sequencer, wireless transmitters, or MIDI pad controller, etc.Dimensions: Small 12.8 x 12.8 x 5.9 Large 23 x 15.4 x 6.5 Regular 24.3 x 17.9 x 9.5
|
|
Road Runner ATA Style Utility Case Black Regular
$159.99
Small ATA style equipment case with adjustable foam. Use it to protect your drum machine, sequencer, wireless transmitters, or MIDI pad controller, etc.Dimensions: Small 12.8 x 12.8 x 5.9 Large 23 x 15.4 x 6.5 Regular 24.3 x 17.9 x 9.5
|
|
Road Runner ATA CDJ800 CDJ1000 DNS3000 DNS5000 Case Black
$99.99
CDJRR: ATA flight case for Pioneer CDJ1000 or CDJ800, Denon DNS 5000, DNS 3000, or DN-S3500, Technics SL-DZ1200, & Stanton C303/304 Digital CD player.Spring handle, aluminum reinforced edges, steel reinforced corners, twist latches.
|
*************************************************************
If you didn"t find what you wanted look below for Ata Effects Road in the Amazon Marketplace.
*************************************************************
 |
17" Lightweight Guitar Effects Pedal Board
Sale Price: $179.99
|
|
|
RRGP17 Features: -Lightweight and durable, the RRGP17 (17'') pedal board case is built smart. -Features such as adjustable effect mounting blocks for endless customization options. -Slide out rear panel for easy cable access, unique cable routing channels to keep your cables out of the way...
|
 |
32" Lightweight Guitar Effects Pedal Board
Sale Price: $279.99
|
|
|
RRGP32 Features: -Lightweight and durable, the RRGP32 (32'') pedal board case is built smart. -Features such as adjustable effect mounting blocks for endless customization options. -Slide out rear panel for easy cable access, unique cable routing channels to keep your cables out of the way...
|
 |
12 SPACE RACK CASE for Amp Effect Mixer PA/DJ PRO with Casters
List Price: $299.99
Sale Price: $199.99
|
|
|
Model # SAR12 12 Space Rack with 4" Casters Standard 19" Mounting Rail Width Outer Dimensions with Doors On: Height: 29" w/Casters - 23" Without Width: 21" - Depth: 26" Inside Dimensions: Rail to Back with Rear Door On: 20 1/2" Rail to Rear Edge of Case with Door Off: 18 1/2" Front Rail to Rear Rail: 17 1/2" Black with aluminum rails 3/8" plywood Light weight, Pro design Heavy duty and ready for abuse Front and rear removable doors Has dual 4" steel link locks on both doors
|
 |
6 SPACE RACK CASE for Amp Effect Mixer PA/DJ PRO Audio
List Price: $179.99
Sale Price: $119.99
|
|
|
Model # SAR6 6 Space Rack Standard 19" Mounting Rail Width Outer Dimensions with Doors On: Height: 12 1/4" - Width: 21" - Depth: 26" Inside Dimensions: Rail to Back with Rear Door On: 20 1/2" Rail to Rear Edge of Case with Door Off: 18 1/2" Front Rail to Rear Rail: 17 1/2" Black with aluminum rails 3/8" plywood Light weight, Pro design Heavy duty and ready for abuse Front and rear removable doors Has dual 4" steel link locks on both doors Dual spring handles on each side Stackabl
|
 |
10 SPACE RACK CASE for Amp Effect Mixer PA/DJ PRO Audio
List Price: $229.99
Sale Price: $159.99
|
|
|
Model # SAR10 10 Space Rack Standard 19" Mounting Rail Width Outer Dimensions with Doors On: Height:19" - Width: 21" - Depth: 26" Inside Dimensions: Rail to Back with Rear Door On: 20 1/2" Rail to Rear Edge of Case with Door Off: 18 1/2" Front Rail to Rear Rail: 17 1/2" Black with aluminum rails 3/8" plywood Light weight, Pro design Heavy duty and ready for abuse Front and rear removable doors Has dual 4" steel link locks on both doors Dual
|
 |
10 SPACE RACK CASE Amp Effect Mixer PA/DJ - Wheel/Casters
List Price: $249.99
Sale Price: $174.99
|
|
|
Model # SAR10.2 10 Space Rack with 4" Casters Standard 19" Mounting Rail Width Outer Dimensions with Doors On: Height: 25 1/4" w/Casters - 19" Without Width: 21" - Depth: 26" Inside Dimensions: Rail to Back with Rear Door On: 20 1/2" Rail to Rear Edge of Case with Door Off: 18 1/2" Front Rail to Rear Rail: 17 1/2" Black with aluminum rails 3/8" plywood Light weight, Pro design Heavy duty and ready for abuse Front and rear removable doors Has dual 4" steel link locks on both doors
|
 |
8 SPACE RACK CASE for Amp Effect Mixer PA/DJ PRO Audio
List Price: $199.99
Sale Price: $129.99
|
|
|
Model # SAR8 8 Space Rack Standard 19" Mounting Rail Width Outer Dimensions with Doors On: Height: 16" - Width: 21" - Depth: 26" Inside Dimensions: Rail to Back with Rear Door On: 20 1/2" Rail to Rear Edge of Case with Door Off: 18 1/2" Front Rail to Rear Rail: 17 1/2" Black with aluminum rails 3/8" plywood Light weight, Pro design Heavy duty and ready for abuse Front and rear removable doors Has dual 4" steel link locks on both doors Dual spring handles on each side
|
*************************************************************
Breathalysers make their way into the workplace to provide a safer environment
You can't always be sure if your employees are affected by alcohol and attempting to monitor alcohol consumption on the worksite runs the risk of angering the Unions. Now this problem can be avoided with the use of fast, accurate and non invasive wall-mounted breathalysers.
Since alcohol can cloud a person's judgment, there is a more accurate way to take the guesswork out of figuring out your blood alcohol content. A wall-mounted breathalyser gives you an accurate BAC test result, establishes beyond argument whether workers are effected by alcohol or not and if necessary, can prevent employees from driving or operating machinery. Employers can never be sure when aworker has had too much to drink; however an onsite breathalyser helps them make an impartial decision. When workers actually see their blood alcohol concentration (BAC), they are less likely to operate heavy machinery or get into a car and drive.
Andatech Wall-mounted breathalysers provide employees with the ability to monitor their own BAC, dramatically lowering the invasion of privacy and therefore satisfying the Unions. They allow fast, accurate readings of an employees BAC at the push of a button. In some instances there has been opposition from civil right activists who raised issues of stifling personal freedom and individual rights. Wall-mounted breathalyser machines help bridge these issues by allowing the employee to operate the unit themselves.
Most fixed breathalysers are equipped with fuel cell technology, which allows for highly accurate BAC test results. They are designed to give the user easy to follow visual cues for proper operation, as well as warnings based on the results. The user simply removes a straw (standard drinking straw) from the dispenser, inserts it into the machine and gives a breath sample. The alcohol sensor calculates alcohol content and displays it within 10 seconds.
The key component to any breathalyser is accuracy. So invest in the best and only consider a wall-mounted breathalyser that is Australian Standard approved. There are very few on the market today such as Andatech Wall Mounted Sober Point that can confidently claim such accuracy in a breath test. Andatech Wall Mounted Soberpoint Breathalysers has Australian Standard AS3547 approved and has all passed rigorous quality assurance tests. The Australian Standard AS3547 only certifies products that meet strict requirements.
When you consider that a breathalyser can prevent workplace accidents from occurring, it's a sensible investment. Safety in the workplace is on everyone's minds. Achieving that safety is worth the investment, especially when you consider it can save yours and other people's lives. Be safe and be sure, cement your workplaces future.
About the Author
Drink Driving is the worst thing that can happen on our street. Breathalyser is the solution to this problem. Articles about breathlysers will help and guide you to choose the right one for your business, and the safety of your employee. Invest only on the Australian Standard Breathalysers.
December 16th, 2009
admin
Effects Rack Case
Check out this page if you are looking for Effects Rack Case
|
SKB 2U Soft Rack Case
$59.99
Primarily designed for wireless microphone systems, the 2U Audio Soft Rack Case from SKB constructed of a wood core covered by 600 Denier nylon. This SKB rack case could also be used for preamps, effects, and other small equipment. This softshell case has been developed with a focus on portability and includes an adjustable shoulder strap and loop handle for easy transport. The 14.8" depth (front rail to back flap) provides plenty of room for the most popular wireless systems. The padded front and back lid has heavy-duty zippers that allow for the flaps to open fully, then fold underneath. A zippered pouch on the inside, front flap provides excellent storage of wireless mic antennae. The SKB rack case's ample-sized exterior zippered pouch is ideal for cables and/or body packs. Threaded, steel rack rails are recessed to provide protection for equipment controls without inhibiting proper antennae placement.
|
|
SKB 1U Soft Rack Case
$49.99
Primarily designed for wireless microphone systems, the 1U Audio Soft Rack Case from SKB is constructed of a wood core covered by 600 Denier nylon. The 1U rack case could also be used for preamps, effects, and other small equipment. This softshell case has been developed with a focus on portability and includes an adjustable shoulder strap and loop handle for easy transport. The 14.8" depth (front rail to back flap) provides plenty of room for the most popular wireless systems. The padded front and back lid has heavy-duty zippers that allow for the flaps to open fully, then fold underneath. A zippered pouch on the inside, front flap provides excellent storage of wireless mic antennae. The SKB rack case's ample-sized exterior zippered pouch is ideal for cables and/or body packs. Threaded, steel rack rails are recessed to provide protection for equipment controls without inhibiting proper antennae placement.
|
|
Road Runner Deluxe Effects Rack Black 2U
$129.99
This deluxe effects rack features front and back mounted dual rack rails with a 14" depth accomodating most every professional effects unit. 3/8" laminated construction with industrial rivets, stackable ball corners and recessed hardware.
|
|
Road Runner Deluxe Effects Rack Black 4U
$159.99
This deluxe effects rack features front and back mounted dual rack rails with a 14" depth accomodating most every professional effects unit. 3/8" laminated construction with industrial rivets, stackable ball corners and recessed hardware.
|
|
Road Runner Deluxe Effects Rack Black 10U
$229.99
This deluxe effects rack features front and back mounted dual rack rails with a 14" depth accomodating most every professional effects unit. 3/8" laminated construction with industrial rivets, stackable ball corners and recessed hardware.
|
|
Road Runner Deluxe Effects Rack Black 8U
$199.99
This deluxe effects rack features front and back mounted dual rack rails with a 14" depth accomodating most every professional effects unit. 3/8" laminated construction with industrial rivets, stackable ball corners and recessed hardware.
|
|
Road Runner Deluxe Effects Rack Black 6U
$169.99
This deluxe effects rack features front and back mounted dual rack rails with a 14" depth accomodating most every professional effects unit. 3/8" laminated construction with industrial rivets, stackable ball corners and recessed hardware.
|
|
SKB 20 Deep Roto Shock Mount Rack Case 4U
$429.99
Based on SKB's Ultimate Strength Series design, the Roto Shock Mount rack cases provide added protection for sensitive music gear. With an internal frame mounted on adjustable elastomer shock absorbers on all eight corners, this revolutionary design controls the effects of shock and vibration on all three axis. The sway space around the SKB case's internal frame provides natural air conditioning — very important for delicate rack equipment. It's also less than half the weight of old-fashioned wood racks.
|
|
SKB 20 Deep Roto Shock Mount Rack Case 8U
$494.99
Based on SKB's Ultimate Strength Series design, the Roto Shock Mount rack cases provide added protection for sensitive music gear. With an internal frame mounted on adjustable elastomer shock absorbers on all eight corners, this revolutionary design controls the effects of shock and vibration on all three axis. The sway space around the SKB case's internal frame provides natural air conditioning — very important for delicate rack equipment. It's also less than half the weight of old-fashioned wood racks.
|
|
SKB 20 Deep Roto Shock Mount Rack Case 6U
$464.99
Based on SKB's Ultimate Strength Series design, the Roto Shock Mount rack cases provide added protection for sensitive music gear. With an internal frame mounted on adjustable elastomer shock absorbers on all eight corners, this revolutionary design controls the effects of shock and vibration on all three axis. The sway space around the SKB case's internal frame provides natural air conditioning — very important for delicate rack equipment. It's also less than half the weight of old-fashioned wood racks.
|
*************************************************************
If you didn"t find what you wanted look below for Effects Rack Case in the Amazon Marketplace.
*************************************************************
|
12 SPACE RACK CASE for Amp Effect Mixer PA/DJ PRO with Casters
List Price: $299.99
Sale Price: $199.99
|
|
|
Model # SAR12 12 Space Rack with 4" Casters Standard 19" Mounting Rail Width Outer Dimensions with Doors On: Height: 29" w/Casters - 23" Without Width: 21" - Depth: 26" Inside Dimensions: Rail to Back with Rear Door On: 20 1/2" Rail to Rear Edge of Case with Door Off: 18 1/2" Front Rail to Rear Rail: 17 1/2" Black with aluminum rails 3/8" plywood Light weight, Pro design Heavy duty and ready for abuse Front and rear removable doors Has dual 4" steel link locks on both doors
|
|
10 SPACE RACK CASE Amp Effect Mixer PA/DJ - Wheel/Casters
List Price: $249.99
Sale Price: $174.99
|
|
|
Model # SAR10.2 10 Space Rack with 4" Casters Standard 19" Mounting Rail Width Outer Dimensions with Doors On: Height: 25 1/4" w/Casters - 19" Without Width: 21" - Depth: 26" Inside Dimensions: Rail to Back with Rear Door On: 20 1/2" Rail to Rear Edge of Case with Door Off: 18 1/2" Front Rail to Rear Rail: 17 1/2" Black with aluminum rails 3/8" plywood Light weight, Pro design Heavy duty and ready for abuse Front and rear removable doors Has dual 4" steel link locks on both doors
|
 |
Odyssey CRS08 8 Space Carpeted Studio Rack
List Price: $119.99
Sale Price: $89.99
|
|
|
Odyssey's CRS08 carpeted studio rack features 3/4" plywood construction and an angled face for easy viewing and access. Open back, no panels front or rear. 8 spaces. Features a 12" top depth, 16" bottom depth, and a fully carpeted exterior...
|
 |
SKB 2U Space Roto Molded Rack
List Price: $169.99
Sale Price: Too low to display
|
|
|
The Ultimate Strength Series is the best in American technology. This new 2U version has been added to complete the line up of Ultimate Series racks. With its roto molded tough shell, front and rear lids, recessed heavy-duty twist latches, molded in handles, shock absorbing rubber feet and the recognizable patented deep Roto-X pattern for solid stackability, these cases provide maximum protection...
|
*************************************************************
Explain to me what exactly direct sunlight is?
Cause i have heard that leaving stuff like CDs for instance in direct sunlight can damage them. Does that mean leaving CDs loose and outside of the case while being outside. Cause i keep my CDs in the corner of my room in their cases and it is on the opposite side of my windows so i don't think my CDs will be effected in any way.
Also for direct sunlight to effect a CD wouldn't the CD have to be loose and upside down and basically outside for there to be any damage? I don't think if a little sunlight hits them or any other light hits them while the CDs are in their cases that it would do any damage cause the case protects them.
I mean i don't want to jinx it or anything but i have had my CD rack in the same spot for a long time and my CDs have always worked.
direct sunlight has a specific characteristic that can damage a CD. the one that is most damaging in the infra red (IR) wavelengths - these are the heating energy waves. if the CD is placed in direct sunlight inside a case, depending on the ambient temperature and how clear the sky is, the CD may heat up to the point where it will melt because the IR will pass through the case. In direct sun are Ultraviolet waves (UV) which can cause the color dyes used in the printing of the jacket to fade, depending on the exposure time and the type of dye used. UV can also cause the plastic in the CD to become brittle and can eventually cause cracking if left in the sun for a long time (on the order of weeks).
Since your CDs are not in direct sunlight in the corner of your room they should be in no danger.
US $8.99
