Gator Cases Rolling
Check out this page if you are looking for Gator Cases Rolling
|
Gator Rolling Conga Bag Pair
$129.98
These Gator Rolling Conga Bags offer you a pair of padded gig bags with wheels that make moving your hand drums a breeze. These Gator conga bags are adjustable to fit varied conga drum sizes, and have a reinforced bottom and shoulder strap. Made of 600-denier nylon. 16"W at base x 13"W at top x 32"H.Padded bags with wheels Adjustable to fit different sizes Reinforced bottom and shoulder strap Protects finish 600-denier nylon
|
|
Gator Gpa-720 Rolling Road Case For Powered Mixer
$129.99
Gator's rugged rolling case for powered mixers features 1/2" plywood covered in 600-denier ballistic nylon construction, a pull-out handle and rollerblade-style wheels for easy transport, large accessory compartments, and a tricot lined interior.1/2" plywood covered in 600-denier ballistic nylon constructionPull-out handleRollerblad-style wheelsLarge accessory compartmentsTricot-lined interior
|
|
Gator Gp Rolling Conga Bag Black
$79.99
The Gator Rolling Conga Bag is a padded bag with wheels that is adjustable to fit congas, tumbas, and quintos. A waist strap cinches to securely hold your drum Reinforced bottom, sturdy feet, and shoulder strap.Padded bag with wheels Adjusts to fit congas, tumbas, and quintos Reinforced bottom with sturdy feet and shoulder strap Heavy-duty #10 zipper Riveted handles
|
|
Gator Gx-22 Rigid Rolling Cargo Case Wide
$239.99
The Gator Rigid Rolling Cable Caddy Cargo Case has a large storage compartment for snakes, a separate lift out storage shelf, exterior storage compartment, tough 600-Denier nylon construction, wheels & a pull-out handle, padded interior and side lift handles. Has large storage compartment for snakes Separate lift out storage shelf Exterior storage compartment 600-Denier nylon construction Wheels & pull-out handle Padded interior Side lift handles 6" interior pull-out storage tray
|
|
Gator Rolling Snare And Bell Kit Bag Black
$104.99
The rugged Gator Rolling Snare And Bell Kit Bag is constructed of nylon and holds your practice bell set and marching snare, as well as your sticks and related accessories. The bag features a removable tow handle and wheels, backpack straps, and a window pocket for your name card.The large compartment measures 24" x 12" x 4". The small compartment measures 13" x 13" x 4".Rugged nylon constructionRemovable tow handle and wheelsBackpack strapsWindow pocket for name cardFits most standard size band snare and bell kitsLarge compartment:24" x 12" x 4"Small compartment:13" x 13" x 4"
|
|
Gator G-901 Rolling Amplifier Head Case
$169.99
The Gator G-901 Rolling Amplifier Head Case features a ballistic nylon exterior with 20mm foam covered in a tricot protective EPS plush lining. The case has a web handle, #10 heavy-duty zippers, storage pocket for pedal controllers and channel switching pedals, tow handle, and wheels finish the package. Ballistic nylon exterior Interior is 20mm foam covered in Tricot Protective EPS plush lined interior Web handle #10 heavy-duty zippers Storage pocket for pedal controllers and channel switching pedals Tow handle and wheels
|
|
Gator G-212A Rolling Amp Transporter And Stand
$219.99
The Gator G-212A Rolling Amp Transporter and Stand features a reinforced hard top for supporting your amplifier on stage, rails to prevent it from vibrating off the amp stand during performance, and rugged 600-denier material over 1/2" wood frame. The interior is 20mm foam covered in tricot. Also has a tow handle, wheels, and an external accessory pocket.Reinforced hard top for supporting amplifier on stageRails to prevent amp from vibrating off the stand during performanceRugged 600-denier material over 1/2" wood frameInterior is 20mm foam covered in TricotTow handle and wheelsExternal accessory pocket
|
|
Gator Gpa-600 Speaker Transporter Rolling Bag Black
$119.99
The Gator GPA-600 Speaker Transporter is a rolling bag that fits molded speaker cabs including the EON 10, Mackie SRM-350, and comparable-sized speakers. 2 accessory pockets as well as a large side pocket designed to hold a 100' speaker cable. Gator constructed the Transporter Bag with 10mm side foam and 600-denier ballistic material. The reinforced bottom has structured foam to cradle your speakers. The Gator Rolling Bag's handles are riveted, and includes a pull-out handle and 6 in-line-style wheels that allow you to transport your speaker cabinets without breaking your back, or even a sweat. Additionally, the bag's skid bars protect the tow-handle mechanism. Fits the following speakers: ADAM SUB10 ADAM Audio SUB10 MKII American Audio PXI-10P American Audio PXI-12P Behringer B212 Behringer B212A Bose B1 Cerwin Vega HT2510 Cerwin Vega LW10 EAW FR129Z EAW SB120ZP EAW SM109Z Electro-Voice FORCE I 12" Electro-Voice SB112 E lectro-Voice SX100 EMES AMBER FBT MAXX 2 JBL EON10 G2 JBL EON510 JBL JRX112M JBL SRX712M JBL VP7210 JBL VP7212M JBL VRX932LA Mackie C200 Mackie SRM350 Peavey PR 10 NEO RCF ART 310A RCF CW3110 RCF SW4012 Studiomaster PAX10 Studiomaster VX12 Wharfedale TITAN 12 Yamaha A12M Yamaha BR10 Yamaha BR12 Yamaha BR12M Yamaha CM10V Yamaha MSR250 Yamaha STAGEPAS 250M Yamaha STAGEPAS 500 Designed to fit most popular molded speaker cabinets Bottom of bag has structured foam to cradle the speaker Rugged pull-out handle and 6 wheel assembly 600-Denier nylon construction 10mm side foam 2 Accessory pockets and 1 large side pocket Designed to fit 100 foot speaker cable Rated up to 100 pounds
|
|
Gator G-112A Rolling Amp Transporter And Stand
$169.99
The hard top of the Gator G-112A rolling amp stand supports the amplifier on stage and support rails keep it from vibrating off during the performance. Rugged 600-denier nylon cover a wood frame. The interior is padded with 20mm of high-density foam covered in Tricot for ultimate protection. Equipped with rugged, reinforced webbing side handles for carrying over rough terrain plus a large accessory pocket for pedals, cables, and gear, the amp stand and transporter is equipped with heavy-duty wheels and an improved pull-out handle with a crush guard. 25"L x 12"W x 19"D.Heavy-duty wheelsPull-out handle with a crush guardA hard top supports the amp on stage and allows better sound projectionRugged nylon covers the wood exterior20mm of foam in interiorSupport railsReinforced webbing side handlesLarge accessory pocket for pedals, cables and gearReinforced hard top for supporting your amplifierTop support rails to prevent amp from sliding off25"L x 12"W x 19"D
|
|
Gator Gsrw-2U Rolling Laptop And 2-Space Rack Bag
$139.99
The Gator GSRW-2U Rolling Laptop 2-Space Rack Bag features a polyethylene reinforced interior frame, rugged 600-Denier nylon construction, and is lightweight yet rigid, thanks to an internal reinforced aluminum valance. Extremely convenient, you'll love the retractable, removable handle and wheels on the case, plus the exterior pocket for cables, etc. The bag's padded polyethylene 16.5" x 12.5" reinforced laptop pocket allows your notebook computer to be connected to music gear during transport, saving you valuable setup time and eliminating cable confusion. The GSR-2U also features field replaceable threaded rack rail on the front and a pass-through hole from the laptop compartment to the rack session for running cables.Polyethylene reinforced interior frame 600-Denier nylon construction Lightweight yet rigid Internal reinforced aluminum valance Retractable, removable handle and wheels Exterior pocket for cables, etc. Padded polyethylene 16.5" x 12.5" reinforced laptop pocket allows laptop to be connected to gear during transport Available in 2-space with top laptop pocket Field replaceable threaded audio rack rail on front Pass through hole from laptop compartment to rack session to run cables
|
|
Used Gator Gav-Dlx-1412R Deluxe Rolling Laptop And Gear Case
$163.79
The professional Gator GAV-DLX-1412R Rolling Case fits your projector, laptop, and music gear. It features Gator-Hyde material for toughness and a classy leather look. The gear and laptop case meets airline regulations for carry ons, has a convenient and effective interior blocking system, and a removable laptop shoulder bag for flexibility. Accessory pockets keep your cables and adapters organized, and six self-lubing roller blade style wheels keep you running smoothly. Removable shoulder strap and telescoping pull-out handle. Professional projector / laptop / music gear case Gator-Hyde material for leather look Meets airline regulations Interior blocking system Removable laptop shoulder bag Accessory pockets Six self-lubing roller blade style wheels Removable shoulder strap Telescoping pull-out handle
|
*************************************************************
If you didn"t find what you wanted look below for Gator Cases Rolling in the Amazon Marketplace.
*************************************************************
 |
Gator GPA-712LG Rolling Speaker Bag
List Price: $209.99
Sale Price: $129.99
|
|
|
Rolling speaker bag for large format 12" speakers including Mackie SRM450v2, JBL MRX512MM, Yamaha MSR400, Peavey Impulse 12D, EV ELX112P, Behringer EUROLIVE B412DSP and Harbinger ASP12
|
 |
Gator Cases Padded Rolling Conga Bag (Black)
List Price: $129.99
Sale Price: $65.26
|
|
|
The Gator Padded Rolling Conga Bag is perfect for percussionist on the go. This conga bag is constructed of durable 600-denier nylon with a padded interior for ample protection. The really beauty of this case is the portability...
|
*************************************************************
M60 machine gun
Overview
The M60 is a belt-fed machine gun that fires the 7.62 mm NATO cartridge commonly used in larger rifles. It is generally used as crew-served weapon and operated by a team of two or three men. The team consists of the gunner, the assistant gunner (A-gunner in military slang), and the ammunition bearer. The gun's weight and the amount of ammunition it consumes when fired make it difficult for a single soldier to carry and operate. The gunner carries the weapon and, depending on his strength and stamina, anywhere from 200 to 1000 rounds of ammunition. The assistant carries a spare barrel and extra ammunition, and reloads and spots targets for the gunner. The ammunition bearer carries additional ammunition and the tripod with associated traversing and elevation mechanism, if issued, and fetches more ammunition as needed during firing.
Firing an M60 machine gun from the standing position during the DEFENDER CHALLENGE '88 competition
The basic ammunition load carried by the crew is 600 to 900 rounds and theoretically allows approximately two minutes of continuous firing at the maximum rate of fire. All crews carry more than the basic load, sometimes three or more times the basic amount.[citation needed]
The M60 can be accurately fired at short ranges from the shoulder due to its design. This was an initial requirement for the design and a hold-over in concept from the M1918 Browning Automatic Rifle. It may also be fired from the integral bipod, M122 tripod, and some other mounts.
M60 ammunition comes in a cloth bandolier containing a cardboard box of 100 pre-linked rounds. The M60 changed from M1 link to the different M13 link, a change from the older link system with which it was not compatible. The cloth bandoleer is reinforced to allow it to be hung from the current version of the feed tray. Historically, units in Vietnam used B3A cans from C-rations packs locked into the ammunition box attachment system to roll the ammunition belts over for a straighter and smoother feed to the loading port to enhance reliability of feed. The later models changed the ammunition box attachment point and made this adaptation unnecessary.
History
The M60 machine gun began development in the late 1940s as a program for a new, lighter 7.62 mm machine gun. The design included features that had been successful on earlier designs (most notably the German MG 42 and FG 42), as well as improvements of its own. It was intended to replace the M1918 Browning Automatic Rifle and M1919A6 Browning machine gun in the squad automatic weapon role. It was also to replace the M1919 family in the medium machine gun role. One of the weapons tested against it during its procurement process was the FN MAG.
The experimental T-44 machine gun developed from the German FG 42 and MG 42 machine guns.
The U.S. Army officially adopted the M60 in 1957. It later served in the Vietnam War as a squad automatic weapon with many U.S. units. Every soldier in the rifle squad would carry an additional 200 linked rounds of ammunition for the M60, a spare barrel, or both. The up-gunned M113 armored personnel carrier ACAV added two M60 gunners beside the main .50 gun, and the Patrol Boat, River had one in addition to two 50 cal mounts.
This section requires expansion with:
Fill in M60 history, including Vietnam War info.
M60 in Vietnam 1966.
In the 1980s, it was partially replaced by the M249 Squad Automatic Weapon within the Infantry squad. The M60 was retained in the vehicle mounted role and the general-purpose role due to its greater power and range compared to the 5.56 mm M249. In USMC service, concerns about the M60's reliability, the system's weight, and high round counts of many M60s in service prompted the adoption of the M60E3 to replace most original M60s in Infantry units.
A 19th Special Forces Group soldier mans an M60 machine gun on a HMMWV in Afghanistan, in March 2004. An AT4 anti-tank launcher can be seen in the foreground.
Starting with Ranger Battalions, the US Army began adopting and modifying M240 variants for replacing their remaining M60s in the early 1990s. By comparison, the M240 is several pounds heavier than the M60, and has a longer barrel and overall length, but is more reliable in use and testing.[citation needed] However, the M60 uses a much simpler gas system that is, when care is taken during reassembly, easier to clean. This advantage is obviated by the fact that, in practice, the gas tube is wired shut with lockwire to prevent the gun from disassembling itself due to vibration in hard use.
A sailor fires an M60E3 machine gun during a live-fire exercise at the Mobile Inshore Underwater Warfare Site (MIUW) at Guantanamo Bay, Cuba.
The M60 continues to be used by U.S. Navy SEALs and as a door gun on U.S. Army helicopters into the 21st century, and as the main 7.62 mm machine gun by some U.S. special operations forces into the late 1990s. As of 2005, it is used by the Coast Guard, Navy, and a number of reserve forces, though it is being phased out in favor of the M240 7.62 mm medium machine gun. The use as an Army helicopter door gun will soon be tapering off, as an improved M240 version has been adopted for this role.
Design
The neutrality of this section is disputed. Please see the discussion on the talk page. Please do not remove this message until the dispute is resolved. (July 2009)
The M60 is a gas-operated, air-cooled, belt-fed, automatic machine gun that fires from the open-bolt position and is chambered for the 7.62 mm NATO cartridge. Ammunition is usually fed into the weapon from a 100-round bandolier containing a disintegrating, metallic split-link belt.
An Airwoman of the UK's Royal Air Force handles an M60 during a demonstration for Combined Joint Task Force Exercise (CJTFEX) in 2004
The design drew on many common concepts in firearms manufacture of the period, such as stamped sheet metal construction, belt feed (a modified mechanism for belt feed from the MG42 with a single pawl), quick barrel replacement, a pistol grip and stock, and a semi-bull pup design similar to the FG42 (much of the action occupies the weapon's stock). The M60's operating system of an operating rod turning a rotating bolt was inspired by the FG42, which was based on the much earlier Lewis Gun. The M60's gas operation is unique, and drew on technical advances of the period, particularly the White "gas expansion and cutoff" principle also exploited by the M14 rifle. The M60's gas system was simpler than other gas systems and easier to clean.
The straight-line layout allowed the operating rod and buffer to run directly back into the buttstock and reduce the overall length of the weapon.
As with all such weapons, it can be fired from the shoulder, hip, or underarm position. However, to achieve the maximum effective range, it is recommended that a bipod-steadied position or a tripod-mounted position be used and fired in bursts of 35 rounds. The weapon is heavy and difficult to aim when firing without support, though the weight helps reduce the felt recoil. The large grip also allowed the weapon to be conveniently carried at the hip. The gun can be stripped using a live round of ammunition as a tool. However, this is highly discouraged, as doing so can damage that round and increase the chance of a misfire.
The M60 is often used with its own integrated bipod or with the M122 tripod. The M60 is considered effective up to 1,100 meters when firing at an area target and mounted on a tripod; up to 800 meters when firing at an area target using the integral bipod; up to 600 meters when firing at a point target; and up to 200 meters when firing at a moving point target. United States Marine Corps doctrine holds that the M60 and other weapons in its class are capable of suppressive fire on area targets out to 1,500 meters if the gunner is sufficiently skilled.
Originally an experimental M91 tripod was developed for the M60, but an updated M2 tripod design was selected over it which became the M122. The M122 would be itself replaced in the 2000s by a new mount, in time for the M60 to also be used with it.
Ammunition
M60 machine gun fired during a small arms familiarization exercise aboard USS Blue Ridge (LCC-19); November 2004
810th Military Police Company, mans a 7.62 mm M60 machine gun atop an M998 High-Mobility Multipurpose Wheeled Vehicle (HMMWV) during Operation Desert Shield.
The M60 family of weapons are capable of firing standard NATO rounds of the appropriate caliber. Most common in U.S. use are M61 Armor piercing, M62 Tracer, and M80 Ball. For training purposes, M63 Dummy and M82 Blanks are used. The new tungsten cored M993 Armor-piercing rounds may also be fired in the M60 as well, though they did not enter the inventory until after the M60 was withdrawn from service in active-duty units.
When firing blanks, the M13 or M13A1 blank-firing adaptor (BFA) is necessary in order to produce enough gas pressure to cycle the weapon with blanks. All ammunition must be fixed in a NATO standard M13 disintegrating metallic split-link belt to feed into the weapon.
The standard combat ammunition mix for the M60 consists of four ball (M80) cartridges and one tracer (M62) in belts of 100 rounds. The four to one ratio theoretically allows the gunner to accurately "walk" the fire into the enemy. Tracer bullets do not fly quite the same trajectory as ball and weapon's sights must be used for accurate firearticularly at ranges in excess of 800 meters, where 7.62x51mm NATO tracer bullets usually burn out and are no longer visible. This is a problem for all weapons in this caliber using this tracer round.
Design flaws
This section does not cite any references or sources.
Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. (July 2009)
An M60 machine gun aboard a Navy patrol craft. The USS Constellation (CV-64) is visible in the background.
When tested in the field, the M60 was fairly effective, but in the jungles of Southeast Asia in which it was soon used, the initial versions displayed several potential problems when used on the ground. A common complaint was the weapon's weight, though M60 was among the lightest 7.62 mm machine guns of the era.
For units in Vietnam, the single most common complaint was that the M60 was comparatively unreliable and prone to jamming and other malfunctions, especially when it was dirty. Fine sand and dust in the mechanism could bring the M60 to a halt. This was a major factor in the Israeli Defense Force declining to adopt the M60. The weapon was more difficult to clean and maintain than the M1918A2 Browning Automatic Rifle (BAR) it replaced in the squad. In normal conditions it would often fire thousands of rounds without a serious jam while field conditions tended to reduce reliability without proper maintenance.
The safety was awkward to operate and worked the "wrong way" for soldiers who were trained with the M16 rifle and M1911A1 pistolhat is, it required an upward movement of the thumb on the safety catch to make the gun ready to fire, rather than a downward movement as with the other weapons. Additionally, it is possible to install some of the fire control mechanism incorrectly, causing a "runaway gun"eaning that it would keep firing until empty even if the operator took his finger off the trigger. The gas system of the original model could be assembled incorrectly causing failure to function and could unscrew and come apart if not safety wired in place.
A Gunner Mate 3rd Class in the process of preventative maintenance and cleaning on an M60 machine on the USS Constellation (CV-64); December 2002
The M60 sometimes (depending on the version) tore rims off of fired cartridge cases during the extraction cycle, resulting in failure to remove the empty case, causing a jam that could take time to clear. The barrel latch mechanism (a swinging lever) could catch on the gunner's equipment and accidentally unlatch, causing the barrel to fall out of the gun. The lever was replaced with a pushbutton mechanism that was less likely to be accidentally released, but many of the swinging-lever latches are still on guns in inventory, forty years after this problem was discovered.
The grip/trigger housing assembly is held in place with a rather fragile leaf spring clip instead of the captive pins used in other designs. The spring clip has been known to be prone to breakage since the first trials at Aberdeen Proving Ground. Duct tape and cable ties have been seen on M60s in the field, placed there by their crews in case the spring clip breaks. The sear in the trigger mechanism gained a reputation for wearing down and a malfunction could cause the gun to "run away". A second sear notch was eventually added to the operating rod to reduce the chance of this happening.
Several critical parts of early production M60s, such as the receiver cover and feed tray, were made from very thin sheet metal stampings and prone to bending or breaking; sturdier parts were eventually available in the early 1970s. Early M60s also had driving spring guides and operating rods that were too thin and gas pistons that were too narrow behind the piston head (part of an attempt to save weight), leading to problems with breakage. Metallurgical problems also played a part, (blamed by some on low-bid contractors), but after 1970 a slightly heavier part was designed and slowly put into the supply chain. High round count weapons were also susceptible to stretching of the receiver and other parts.
An M60 machine gun team changes barrels before engaging their last target during the DEFENDER CHALLENGE '88 competition.
Another criticism with some versions of the M60 is that the barrel was heavy. The bipod was a permanent fixture to the barrel as well as the gas chamber of the gas system; the latter was a result of using a piston design with a fixed regulator design. The advantage of the fixed regulator was no adjustment was required, though it risked the ability to compensate for fouling of the gas system, leading to insufficient power to operate the action, including lifting the ammunition belt. The non-adjustable front sight is fixed to the barrel and adjustments for "zeroing" the sights could only be made at the rear sight requiring readjustment when the barrel is changedot ideal for combat situations.
There was no handle to hold the barrel by for changes. A large asbestos glove was part of the standard issue to allow the crew to handle hot barrels during barrel change. Loss of the glove was always a problem.
U.S. Marines especially disliked the M60, and many Marine units held onto their BARs until 196768 officially, and longer unofficially. The M60E3 variant designed in the mid-1980s for the U.S. Marine Corps, reduced the design's weight to 18.9 lb (8.61 kg) unloaded and slightly improved reliability. Users complained about the quickly-overheating barrel, a common problem with the original M60. This problem was aggravated in the M60E3, which uses a lighter barrel, which required changing every 100 rounds instead of every 200. The M60E3's barrel used a wire and plastic handle near the breech end and could be changed safely without the use of heat-resistant mittens.
The U.S. Navy special operations forces continued to use and upgrade the M60E3 for years because of its portability and low weight for its caliber requiring many modifications, including a change in feed system and barrel configuration. Additional required changes were the addition of rails for optical sights and other modern accessories.
The reliability problem with the M60 machine gun was even more evident when the gun was compared to the successful and reliable PK machine gun used by Warsaw Pact forces and Soviet client states.
Variants
A member of the 101st Airborne Division, armed with an M60 machine gun, participates in a field exercise in 1972.
The nomenclature M60 describes either the first adopted version or, generically, the family of weapons derived from it.
Major variations include the M60E1 (an improved version that did not enter production), the M60E2 (a version designed to be used from fixed mounts as a co-axial for armored vehicles or in helicopter armament systems), the M60E3 (a lightweight version) and the M60E4 (another improved version, designated Mk 43 Mod 0 by the U.S. Navy).
The M60C was adopted for use on fixed mounts on aircraft. It was characterized by the use of an electric solenoid to operate the trigger and a hydraulic system to charge the weapon. The M60D differed from the base model by employing spade grips, a different sighting system, and lacking a forearm. It was typically employed as a door gun on helicopters or as a pintle mounted weapon as on the Type 88 K1 tank.
There are many smaller variants among each type, between makers of the firearm, and over time.
Variant summary
T161: The M60's developmental designation before it was type-classified in the 1950s.
M60: The basic model, type-classified in 1957.
M60E1: An improved version that did not enter production. The primary difference was the handle fixed to the barrel and the removal of the gas cylinder and bipod from the barrel assembly.
M60E2: Used in vehicles as a coaxial machine gun; electrically fired.
M60B: Used in helicopters in the 1960s and 1970s; unmounted.
M60C: Used in fixed mounts in aircraft in the 1960s and 1970s; electrically fired and hydraulically charged.
M60D: Replaced the M60B; a pintle-mounted version used especially in armament subsystem for helicopters, but also some other roles.
M60E3: An updated, lightweight version adopted in the 1980s.
M60E4 (Mk 43 Mod 0/1): An improved model of the 1990s that looks similar to the E3, but has many improvements. It has subvariants of its own, and is also used by the U.S. Navy (as the Mk 43 Mod 0/1). The Mk 43 Mod 1 is a specialized version with additions such as extra rails for mounting accessories.
M60
M60 on the deck of USS Theodore Roosevelt (CVN-71) in 2006.
The initial version was officially adopted by the U.S. Army in the late 1950s, though at this time it was only intended for the infantry. It was known as the T161 before it was adopted (specifically the T161E3), and was chosen over the competing T52 during testing in the 1950s. They both used a similar feed and were both gas-operated, but the T161 was easier to produce and its different internals performed better. The model that won the competition was the T161E3.
The model was type-classified in 1957, and entered production. It saw its first heavy use in the 1960s. The basic design has undergone some smaller changes, and has been produced by different manufacturers.
M60E1
The M60E1 was the first major variant of the original M60. It did not go into full-scale production, though many of its features were included into the later E3 and E4 variants. Some of its features were also incorporated into the existing M60 production. This mainly changed how the gas cylinder, the barrel, and the bipod were connected; in the first iteration. The M60 and the M60E1 are two different versions. Opinions are varied on whether the M60E1 was officially adopted or not.
A camouflaged infantryman armed with an M60 machine gun.
One of the more noticeable changes on the M60E1 is that the bipod attachment point was moved to the gas tube rather than the barrel (like on the later M60E3). It did not, however, have a forward pistol grip, as was added on the E3.
M60E2
M60E2, intended for co-axial use. Note gas tube extension and no grip.
The M60E2 is used on armored fighting vehicles, such as the M48A5, later M60 Patton versions and the K1 Type 88. It lacks many of the external components of the standard M60, including stock and grips. The M60E2 was electrically fired, but had a manual trigger as a backup, as well as a metal loop at the back for charging. The gas tube below the barrel was extended to the full length of the weapon to vent the gas outside the vehicle. This version achieved a mean time between failures of 1,669 during testing in the 1970s, more frequent than the FN MAG, which was adopted in 1977 as a co-axial vehicle gun and designated the M240.
The M60E2 is used on the South Korea's K1 Type 88 tank as a co-axial weapon, along with an M60D on a pintle mount.
M60B
The M60B was a short-lived version designed to be fired from helicopters, with limited deployment made in the 1960s and 1970s. It was not mounted, just held, and was soon replaced by the pintle-mounted M60D. The 'B' model differed most noticeably in that it had no bipod and featured a different rear stock than the regular model. It still had a pistol grip (as opposed to spade grips). The M60B's advantage over pintle-mounted variants was that it had a wider and much less restricted field of fire.
M60C
The M60C machine gun.
The M60C is a variant of the standard M60 for aircraft-mounting, such as in helicopter armament subsystems. It lacks things like the bipod, pistol grip, and iron sights. The main difference between the standard M60 and the "C" variant is the electronic control system and the hydraulic swivel system used. It could be fired from the cockpit by the pilot or co-pilot. It is an electronically-controlled, hydraulic-powered, air-cooled, gas-operated, belt-fed weapon system. It used the M2, M6, and M16 armament subsystems and was mounted on the OH-13 Sioux, the OH-23 Raven, the UH-1B Huey, and comprised the standard fixed armament of the OV-10 Bronco. M60C production was on the order of several hundred. It was also used in the XM19 gun pod.
See also: US Helicopter Armament Subsystems
M60D
The M60D on the M23 Armament Subsystem.
The M60D is a mounted version of the standard M60. It can be mounted on boats, vehicles and as a pintle-mounted door gun in helicopters. When used in aircraft, it differs from the M60C in that it is not controlled by the pilotather, it is mounted in a door and operated by a member of the crew. Like the rest of the M60 family, it is an air-cooled, gas-operated, belt-fed weapon. Unlike other models, however, the M60D normally has spade grips and an aircraft ring-type sight or similar, as well as an improved ammunition feed system. A canvas bag is also affixed to the gun to capture ejected casings and links, preventing them from being sucked into the rotor blades or into an engine intake. The M60D was equipped on the UH-1B Huey (using the M23, XM29, M59, and the Sagami mounts), the CH-47 Chinook (using the M24 and M41 mounts) in both door and ramp locations, the ACH-47A "Guns-A-Go-Go" variant of the Chinook (using the XM32 and XM33 mounts), and on the UH-60 Black Hawk (using the M144 mount). The M60D is also used by the British on Royal Air Force Chinooks. In US service, the M60D are being replaced, primarily by the M240H.
See also: US Helicopter Armament Subsystems
M60E3
Navy SEAL team member fires an M60E3 from the shoulder during a field training exercise in 1987.
The M60E3 was fielded circa 1986 in an attempt to remedy problems with earlier versions of the M60 for infantry use. It is a lightweight, "improved" version intended to reduce the load carried by the gunner. Unlike its predecessors, the M60E3 has several updated modern features. It has a bipod (attached to the receiver) for improved stability, ambidextrous safety, universal sling attachments, a carrying handle on the barrel, and a simplified gas system. However, these features also caused almost as many problems for the weapon as they fixed. There were different types of barrels used, but the lightweight barrel was not as safe for sustained fire at 200 rounds per minute as heavier types. However, some personnel claim to have witnessed successful prolonged firing of the weapon. The stellite superalloy barrel liner makes it possible, but the excessive heat generated by this process can quickly make the gun unusable. There were two main barrels, a lightweight barrel and another heavier typehe former for when lighter weight was desired, and the latter for situations where more sustained fire was required.
M60E3.
The reduced-weight components also reduced the durability of the weapon, making it more prone to rapid wear and parts breakage than the original. Most infantry units in the U.S. Army and Marine Corps have now switched over to the M240 as their general-purpose machine gun, which is more reliable (particularly when dirty) and seems to be well-liked by the troops for its ruggedness, despite the fact that it weighs 27.6lb (12.5kg) compared to the standard M60 at 23.15lb (10.5kg).
The U.S. Air Force Security Forces received the M60E3 from 1988 to 1989. All USAF M60E3s were withdrawn from general issue by 1990, because it did not meet the vehicle mount requirements of the Cadillac Gage Ranger and due to overheating problems. The M60E3 did remain in the Air Force as an emergency issue weapon only. Still in service on Ohio Class ballistic missile submarines as a more reliable weapon has not even been considered for reissue.
M60E4 and Mk 43 Mod 0/1
This firearm is the latest generation of the M60 family and incorporates a number of improvements over other versions. Externally, it looks somewhat like the M60E3, but it has other internal changes and improvements. It features a different forward grip and is also a more reliable weapon than the other M60s. The M60E4/Mk 43 has higher pull for the belt, and is available in a variety of configurations. It is also possible to convert some older models to this standard. The M60E4 and Mk 43 were primarily developed in the 1990s. First the E4, and soon after the Mk 43hese early Mk 43s had some distinct differences from the E4 (such as a duckbill flash suppressor), though by the 2000s these distinctions seemed to have ended.
A mounted Mk 43 Mod 0 (M60E4) (later model) is crewed by a Seabee of NMCB-15 (Naval Mobile Construction Battalion), on a convoy in Iraq in May 2003.
This version also has another designation under the Navy, Mk 43 Mod 0. The Mk 43 Mod 0 was developed for the U.S. Navy SEALs to replace their existing stock of M60E3 machine guns fitted with shorter "assault barrels". These weapons are identical to standard M60E4s, with the exception of the barrel length, and can be used either as suppressive fire or direct fire weapons, at least in terms of theory and training. The Mk 43 Mod 1 adds significantly more rail attachment points to the weapon's receiver cover and handguard.
The M60E4 and Mk 43 versions are roughly similar, although they are only part of the same family. While it might be fair to say that the Mk 43s are a type of M60E4, there are technical differences between any given M60E4 model. Early Mk 43s have certain differences over M60E4 from the same period, the most obvious being the duck-bill flash hider and different handguard. Current Mk 43s do not have these differences however, and the U.S. Ordnance website states in their FAQ, as of 2005, that the "M60E4 and the Mk43 are the same weapon system".
The M60E4 was pitted against the (then called) M240E4 in Army trials during the 1990s for new medium machine gun for the infantry, in a competition to replace the decades-old M60s. The M240E4 won, and was then classified as the M240B. This led to 1,000 existing M240s being sent to Fabrique Nationale for an overhaul and a special kit that modified them for use on ground (such as a stock, a rail, etc.). Afterwards, procurement contracts were let in the late 1990s for all-new M240B models. However, a new feature was added: a hydraulic buffer system to reduce the felt recoilimilar to that of the M60as incorporated. While the M240B had been more reliable in the tests, it was a few pounds heavier than the M60E4.
The M60E4 is not just another version, but a whole update to the series, that is also available in many of the previous configurations, such as a co-axial weapon. Kits are also offered to convert older models to the E4 standard.
M60E4 (Light machine gun):
Short barrel: weight: 22.5 lb (10.2 kg); length: 37.7 in (95.8 cm)
Long barrel: weight: 23.1 lb (10.5 kg); length: 42.4 in (108 cm)
Assault barrel: weight: 21.3 lb (9.66 kg); length: 37.0 in (94.0 cm)
Width: 4.8 in (12.2 cm)
M60E4 (mounted):
Length: 43.5 in (110 cm)
Width: 5.9 in (15.0 cm)
Weight: 22.7 lb (10.3 kg)
M60E4 (co-axial):
Length: 42.3 in (107 cm)
Width: 4.8 in (12.2 cm)
Weight: 21.2 lb (9.62 kg)
Civilian versions
A number of semi-automatic versions for the civilian market have been produced in the United States. The internals must be extensively modified to make it essentially impossible to convert them to fully-automatic weapons. If the design is approved by the U.S. Bureau of Alcohol, Tobacco, Firearms and Explosives (BATFE), they are treated as belt-fed semi-automatic rifles; however, individual state and local regulations still apply.
The U.S. Ordnance company is the current maker authorized by Saco to produce mil-spec M60s and M60 parts. However, U.S. Ordnance put its civilian semi-auto sales on hold until 2006 because its production capacity is required for government orders. The company had charged $8000 for a new semi-automatic M60.
The Desert Ordnance company is a current maker of M60s and M60 parts. The company charges between $13000-$14000 for a new semi-automatic M60, depending on the model.
Various makes of older fully-automatic versions are on the market as well, but there are many legal requirements to be met before purchasing them, and they cost upwards of U.S. $20,00030,000. This is largely due to the restriction on the production of fully-automatic firearms in the U.S. for the general civilian market since 1986. The combination of banning production and importation has led many to think it is illegal to own a machine gun, when, in fact, it is legal to own and use a fully-automatic M60 machine gun in the United States (unless prohibited by other state or local laws).
Users
Republic of Korea soldiers with an M60 conduct combined amphibious landing during Foal Eagle 07.
Moro Islamic Liberation Front militant laying prone with an M60.
Portuguese Army V-150 Commando armed with an M60.
Australia
Colombia
Czech Republic: The M60E4 is used in small numbers by specialized units of the Czech Army.
Egypt
Greece
Jordan
Panama
Peru
Philippines
Portugal: Portuguese Army uses M60E and D mounted on V-150 Commando.[citation needed]
Republic of Korea
Taiwan
Thailand
Tunisia
United States: Used by the US Army and the US Navy SEALs.
See also
Military of the United States portal
Airman with M60, assigned to the 52nd Security Forces Squadron (SFS), at Spangdahlem Air Base (AB), Germany.
PK machine gun, M60's Warsaw Pact counterpart.
List of individual weapons of the U.S. Armed Forces
List of crew-served weapons of the U.S. Armed Forces
References
^ a b The M60. Federation of American Scientists.
^ Weapons: An International Encyclopedia From 5000 B.C. To 2000 A.D. Diagram Visual, p. 217. ISBN 0-312-03950-6.
^ "Gun Control : Machine Guns". Guncite.com. 2005-02-19. http://www.guncite.com/gun_control_gcfullau.html. Retrieved 2009-07-06.
^ a b c d e f g h i j k {{cite web |url=http://www.worldpolicy.org/projects/arms/reports/smallarms.htm |title=Profiling the Small Arms Industry
^ http://www.army.cz/assets/files/9334/zbrane_definit.pdf
^ http://www.timawa.net/pmc.htm
^ Miller, David (2001). The Illustrated Directory of 20th Century Guns. Salamander Books Ltd. ISBN 1-84065-245-4.
^ M60E3 & Mk43 Mod 0
Global Security: the M60E3
Modern Firearms & Ammunition: the M60
Department of the Army Field Manual No. 3-22.68
U.S. Army TACOM Rock Island
MCWP 3-15.1 United States Marine Corps: "Machine Guns and Machine Gun Gunnery"
Navy SEALs
M60E4
External links
Wikimedia Commons has media related to:
M60 (machine gun) (category)
US Ordnance Website (Current maker of M60s)
Military Factory Small Arms
Belt-Fed FG42: Predecessor to the M60
US Army manual: Operator's Manual For M60, M122, M60D
Video links
Nazarian`s Gun`s Recognition Guide (FILM) M60 Presentation (.MPEG)
v d e
General Purpose Machine Guns (GPMG)
AA-52 AEK-999 FN MAG M60 Heckler & Koch HK21 Kucher Model K1 MG 34 MG 42 MG 3 Type 67 Type 80 SIG MG 50 MG 51 SIG MG 710-3 PK Pecheneg Sumitomo NTK-62 Uk vz. 59 UKM-2000 Vektor SS-77 Zastava M84
v d e
Current U.S. infantry weapons and cartridges
Handguns
M9 M11 MEU(SOC) Mk 23 Mk 24
Rifles
Assault and Battle
M16 Mk 14 Mk 16
Carbine
HK416 M4 Mk 18
Designated Marksman
DMR M14 M39 Mk 12 SAM-R SDM-R SEAL Recon Rifle
Sniper
M24 M40 M107 M110 Mk 11 Mk 15
Shotguns
M26 M590 M870 M1014
Submachine guns
MP5N P90
Machine guns
M2HB M240B M249 and Mk 46 Mk 43
Grenade launchers
M203 M32 M320 M79 Mk 19 Mk 47
Mortars
M120 M224 M252
Rockets
M3 M72 series M136 M141 M202A1 Mk 153
Missiles
FGM-172 FGM-148 FIM-92
Cartridges
12-gauge 5.7x28mm 9x19mm NATO .45 ACP 5.56x45mm NATO 7.62x51mm NATO 12.7x99mm NATO
v d e
Current equipment of the United States Air Force
Aircraft
Attack
A/OA-10A/C Thunderbolt II AC-130H/U Spectre/Spooky II
Bomber
B-1B Lancer B-2A Spirit B-52H Stratofortress
Electronic Warfare
E-3B/C Sentry E-4B E-8C Joint STARS E-9A EC-130J Commando Solo
Fighter
F-15C/D Eagle F-15E Strike Eagle F-16C/D Fighting Falcon F-22A Raptor
Reconnaissance
OC-135B Open Skies RC-26B RC-135S/U/V/W RQ-4A Global Hawk RQ-11B Raven RQ-170 Sentinel U-2R/S Dragon Lady WC-130J Super Hercules WC-135C/W Constant Phoenix Scan Eagle Wasp III
Search and Rescue
HH-60G/MH-60G Pave Hawk HC-130P/N
Tanker
KC-10A Extender KC-135E/R/T Stratotanker
Trainer
T-1A Jayhawk T-6A Texan II (A)T-38A/B/C Talon T-43A TG-10B/C/D TG-15A/B
Transport
C-5A/B/C/M Galaxy VC-9C C-12C/D/F Huron C-17A Globemaster III C-20A/B/C Gulfstream III C-20G/H Gulfstream IV C-21A Learjet CV-22 Osprey VC-25A C-32A/B C-37A Gulfstream V C-37B Gulfstream V C-38 Courier C-40B Clipper C-41A Aviocar C-130E/H/J Hercules
Utility/Multi-Mission
LC-130H MC-130 Combat Talon I,II/Combat Spear/Combat Shadow MQ-1B Predator MQ-9 Reaper U-28A UH-1H/N/V Huey UV-18A/B Twin Otter YAL-1
Space Systems
Launch Vehicle
Atlas V Delta II Delta IV
Satellite
Defense Meteorological Satellite Program (DMSP) Defense Satellite Communications System (DSCS) Defense Support Program (DSP) Global Positioning System (GPS) Milstar Satellite Communications System Mobile User Objective System (MUOS) Space-Based Infrared System (SBIRS) Wideband Global SATCOM
C2
AN/USQ-163 Falconer
Munitions
Bomb
CBU-87 Combined Effects Munition CBU-89 Gator CBU-97 Sensor Fuzed Weapon GBU-10 Paveway II GBU-12 Paveway II GBU-15 GBU-24 Paveway III GBU-27 Paveway III GBU-28 GBU-31 JDAM GBU-32 JDAM GBU-38 JDAM GBU-39 Small Diameter Bomb GBU-54 Laser JDAM Mk-82 Mk-84 M129
Missile
AGM-65A/B/D/E/G/G2/H/K Maverick AGM-86B/C/D Air-Launched Cruise Missile (ALCM) AGM-88A/B/C High-speed Anti-radiation Missile (HARM) AGM-130 Powered Standoff Weapon AGM-154A Joint Standoff Weapon (JSOW) AGM-158 Joint Air-to-Surface Stand-off Missile (JASSM) AIM-7M Sparrow AIM-9M/X Sidewinder AIM-120B/C Advanced Medium-Range Air-to-Air Missile (AMRAAM) LGM-30G Minuteman III
Target
BQM-34 Firebee BQM-167 Subscale Aerial Target MQM-107 Streaker QF-4 Aerial Target
Small Arms
M4 Carbine M9 Semiautomatic Pistol M11 Semiautomatic Pistol M1911A1 Semiautomatic Pistol M14 Stand-off Munitions Disruptor (SMUD) M16A2 Rifle M18A1 Claymore Mine M24 Sniper Weapon System M67 Fragmentation Grenade M79 Grenade Launcher M107/M82A1 Long Range Sniper Rifle M2 .50-Caliber Machine Gun M240B Medium Machine Gun M249 light machine gun M60 Medium Machine Gun MCS 870 Modular Combat Shotgun MK-19 40 mm Machine Gun MP5K Submachine Gun UZI Submachine Gun M72 Light Anti-tank Weapon (LAW) GAU-5A/GUU-5P Carbine M136 AT4 Light Anti-tank Weapon Mk 14 Mod 0 Enhanced Battle Rifle
Categories: General purpose machine guns | Cold War infantry weapons | 7.62 mm machine guns | Machine guns of the United States | Aircraft guns | Modern infantry weapons of Australia | Vietnam War infantry weapons of Australia | Historical United States Coast Guard weaponsHidden categories: All articles with unsourced statements | Articles with unsourced statements from July 2009 | Articles to be expanded from July 2009 | All articles to be expanded | Wikipedia expand-section box with explanation text | NPOV disputes from July 2009 | All NPOV disputes | Articles needing additional references from July 2009 | All articles needing additional references | Articles with unsourced statements from February 2010 | Articles lacking in-text citations from July 2009 | All articles lacking in-text citations
About the Author
I am an expert from China Manufacturers, usually analyzes all kind of industries situation, such as circle diamond earrings , amber stud earrings.
US $74.99
